EC- except needs some work (reseat, glue, level, recrown and polish frets, new strings, setup, etc. - sold AS-IS), dark stain mahogany neck, tubaphone-style tone ring, fancy rosewood resonator with cream binding and herringbone purfling, maple pot with 28-hook bracket band, 4-piece flange, dual coordinator rods, large slotted diamond inlays in bound rosewood fretboard, 11" frosted head, 5 geared tuners with pearloid buttons, ~26-3/4" scale, ~1-3/8" nut width, made in Japan, with brown semi-HSC (yellow lining)
70U-3258
$525.00
AMIGO BY LOTUS AM30 (1994)
12 Photos
VGC+ except needs some work (glue, level and dress frets, restring, set up, etc. - sold AS-IS), 3/4 size (12-1/2" lower bout), all laminated construction, spruce top, mahogany back, sides and neck, 1-3/4" nut width, 24" scale, decal rosette, made in Romania, with chipboard SSC
28U-2248
$40.00
|
ARIA AD-80CE N (c.2004)
15 Photos
EC- except for repaired top crack and could use some work (dress frets, reglue one back brace, restring and set up, etc. - sold AS-IS), acoustic-electric, rounded cutaway, D-size, gloss natural finish, solid spruce top, rosewood back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with snowflake, diamond and catseye inlays, ebonized bridge with snowflakes, abalone top purfling and soundhole rosette, tortoise plastic pickguard, 15-5/8" lower bout, 25-5/8" scale, 1-11/16" nut width, 3-3/4" to 4-3/4" body depth, factory Fishman Classic 4 pickup system, gold tuners, white-bound body, fretboard and headstock, script logo on headstock reads "Aria Dreadnought", import model, with TKL HSC (gray lining) (SN:0402488)
20U-12590
on hold..$325.00
|
ARIA SB400 (1980's)
13 Photos
VG-EC except needs work (replace head, dress frets, replace thumbscrews, clean, restring and set up, etc. - sold AS-IS), Bluegrass style banjo, mahogany neck, white-bound 22-fret rosewood fretboard with varied pattern inlays, 1-3/16" nut width, 26-1/4" scale, 20-hole flathead-style tone ring, one-piece flange, 5/8" multi-ply rim, single coordinator rod, 24-brackets, double white-bound rosewood resonator with decorative pearl cross inlay in center of back, replacement Planet-style tuners, replacement clamshell tailpiece (broken original butterfly-engraved tailpiece in case), Shubb sliding 5th string capo installed, missing armrest, quality import banjo, with flat top semi-HSC (yellow lining)
70U-3175
$550.00
|
BLUESFEEL MODEL FA-330 (1990's?)
10 Photos
VG-EC except needs work (glue bridge wings, fix "G" tuner or replace, restring and set up, etc. - sold AS-IS), acoustic-electric, rounded cutaway, synthetic back and sides, X-braced spruce top with transparent black burst finish, 14-fret nato neck, white-bound 21-fret rosewood fingerboard with dot inlays, rosewood belly bridge, oval soundhole, w-b-w-b-w top purfling, 15-5/8" lower bout, ~3" body depth at endblock, 25.4" scale, 1-21/32" nut width, factory pickup with volume and tone control, chrome tuners, built in Korea
20U-12533
$49.00
|
BREEDLOVE AD20/SM (2008)
12 Photos
EC except could use minor work (restring and set up, etc. - sold AS-IS), Atlas Series, D-size, gloss natural finish, solid spruce top, mahogany back and sides, 14-fret mahogany neck, black-bound 20-fret rosewood fingerboard, abalone dot inlays, 1-11/16" nut width, 25-5/8" scale, 16-1/4" lower bout, 3-3/4" to 4-3/4" body depth, pinless rosewood brige, abalone soundhole rosette, tortoise plastic pickguard and body binding, gold Grover mini-Rotomatic tuners, built in Korea, with nice Breedlove gigbag (SN:08030313)
20U-12331
$425.00
|
CHARVEL® 625 MBK (1990's)
12 Photos
EC- except for large ding in top between bridge and soundhole, plus needs work (replace too-low saddle, level and dress frets, cleanup, restring, setup, etc. - sold AS-IS), black finish, single cutaway jumbo body acoustic (no pickup in this model), white-bound spruce top, white-bound mahogany body, 20-fret rosewood fingerboard with abalone dot inlays, rosewood bridge (with one non-matching bridge pin), chrome individual tuners, 25-1/2" scale, 1-11/16" nut width, made in Korea (SN:00091300)
20U-12307
$120.00
|
CRUISE BY VMI (recent)
11 Photos
EC- except needs work (replace frets 5, 6, and 7, and glue, level, and dress others, plus cleanup, clean electronics, replace missing tremolo arm, new strings, setup, etc. - sold AS-IS), sunburst finish, classic double-cutaway body, bolt-on neck with 21-fret rosewood fingerboard and dot inlays, three single-coil pickups with 1 volume and 2 tone, 5-way switch, w-b-w pickguard, chrome hardware, 25-1/2" scale, 1-11/16" nut width, built in Asia
30U-15572
$65.00
|
DAISY ROCK (recent)
12 Photos
EC except needs light work (restring, minor setup, etc. - sold AS-IS) light blue finish, from the famous "girl guitar" maker, composite oval back, white bound 20-fret slim profile neck, white-black-w-b-w-b top purfling, daisy fret markers, ~25-1/4" scale, 1-3/4" nut width, Grover Rotomatic tuners, made in Korea, with purple (lightweight) Daisy Rock gigbag (SN:00093X)
20U-12664
$100.00
|
DEAN CADILLAC (2004)
13 Photos
EC- except could use minor work (polish frets, restring and set up, replace one broken knob, etc. - sold AS-IS), mahogany body and set mahogany neck with V-headstock, arched top with quilted maple top, tiger eye finish, cream-bound 22-fret rosewood fingerboard with pearl block inlays, stop tailpiece, t-o-m-style bridge, 2 humbucking pickups with "zebra" bobbins, 3-way toggle switch, 2 volume and 2 tone controls, the tone controls are push / pull and act as coil taps (one for each pickup), cream-b-c-b-c bound top and headstock, Grover Rotomatic tuners, gold hardware, 24-3/4" scale, 1-11/16" nut width, 8.2 lbs., built in Korea, with OHSC (gray lining) (SN:E040884)
30U-15765
$325.00
|
DEAN TRADITION QS12 GN (c.2004)
13 Photos
EC- except needs some work (dress frets, lower saddle, restring and set up, etc. - sold AS-IS), D-size, gloss natural finish, solid spruce top, quilted maple back and sides, 14-fret mahogany neck, black-bound 20-fret rosewood fingerboard with abalone dot inlays, rosewood bridge, w-b-w-b-faux pearl-b-w-b-w top purfling, white-bound back, abalone soundhole rosette, gold Grover mini-Rotomatic tuners, 15-5/8" lower bout, 25-5/8" scale, 1-7/8" nut width, 3-7/8" to 4-7/8" body depth, active Fishman undersaddle pickup installed with controls on edge of soundhole, 1/4" endpin jack, built in Korea, with SSC (SN:04092259)
26U-1871
$225.00
|
DEERING DELUXE 12 BANJO GUITAR (1993)
14 Photos
EC- except needs work (refret to straighten neck and repair maxed truss rod, strings, setup, etc. - sold AS-IS), 12-string guitar neck on banjo rim, mahogany neck and double white-bound resonator, 22-fret ebony fingerboard, pearl dot inlays, 1-15/16" nut width, ~26-1/8" scale length, nickel hardware, one-piece flange, flathead tone ring, dual coordinator rods, black peghead overlay with silkscreened eagle and Deering logo, chrome Grover mini-Rotomatic tuners, with arched-lid HSC (blue lining), price reduced (SN:11154193-2928)
26U-1750
$1,150.00
|
DOBRO 60D ROUNDNECK (1983)
12 Photos
VG-EC except needs much work (remove extension nut, enlarge truss rod cavity to allow more adjustment for very bowed neck, glue and dress frets, reshaped or replace distorted original cone, turn replacement tuners around, setup, etc. - sold AS-IS), sunburst finish, maple body and 12-fret roundneck, bound top and back, slotted headstock, rosewood fingerboard, 19 frets, dot inlays, spider bridge, fan design coverplate, dual screen holes and 3 holes at end of fingerboard extension, stamped tailpiece, chrome hardware, 1-3/4" nut width, 24-3/4" scale
50U-1955
$850.00
|
DOBRO F-60 (1999)
14 Photos
EC except needs work (incorrect neck angle - really needs a neck reset - plus level and dress frets, new strings, setup, etc. - sold AS-IS), sunburst finish, 14-1/8" all (laminate) maple body, f-holes, 12-fret round maple neck, solid headstock, rosewood fretboard, dot inlays, 19 frets, fan design coverplate, spider bridge, trapeze tailpiece, Grover mini-rotomatic tuners, great sound, 1-3/4" nut, 24-3/4" scale, with wooden OHSC (black lining) (SN:D 9082539)
50U-2020
$1,250.00
|
EPIPHONE ADELPHI (1944)
12 Photos
EC- except needs work (glue peghead ears and overlay, level frets, setup, etc. - sold AS-IS) sunburst finish all around, teardrop shape, A-style, arched spruce top with f-holes, tone-bar bracing, maple sides and arched back, mahogany neck joins body at 10th fret, 20 fret Brazilian rosewood fretboard with pearl dot inlays, adjustable rosewood bridge, clamshell tailpiece, tortoise plastic pickguard, proper 3-a-plate open-gear tuners with cream oval buttons on treble side and black oval buttons on bass side, no headstock logo, 10-1/2" body width, 13" scale, ~2" body depth, 1-1/4" nut width, built in New York, with OHSC (blue lining), price reduced (SN:51159)
90U-4969
$750.00
|
EPIPHONE CABALLERO FT30 (1966)
14 Photos
VG-EC except needs work (reglue 3 loose back braces, glue and cleat back crack, dress frets, setup, etc. - sold AS-IS), gloss natural finish (lots of checking), 14-3/8" lower bout, 3-1/2" to 4-3/8" body depth, all solid mahogany construction, ladder-braced top, 14-fret mahogany neck, 20 fret rosewood fingerboard with pearloid dot inlays, tortoise plastic top binding, rosewood reverse belly bridge (has repaired crack, seems solid), screwed down tortoise plastic pickguard with silver Epsilon "E" logo, black headstock with gold logo, 3-on-a-plate open-gear tuners, black stinger on neck heel, 1-9/16" nut width, 24-3/4" scale, made by Gibson in the USA, (very similar to Gibson LG-0), with SSC (blue felt interior) (SN:434204)
20U-12641
$550.00
|
EPIPHONE PR-5E (c.1992)
14 Photos
EC- except needs work (glue-fill edge of bridge, restring, setp, new 9v batter, etc. -sold AS-IS), acoustic-electric, gloss natural finish, 15-3/4" lower bout, sharp cutaway, solid spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with slotted diamond inlays, 1-11/16" nut width, 25-1/2" scale, rosewood bridge, w-b-w-b-w-b-w-bound top, w-b-w-bound back, factory Epiphone V pickup / preamp system with volume, 4-band EQ, gold tuners, made in Korea, with HSC (SN:92701324)
20U-12638
$250.00
|
ESP LTD B-104 (c.2003)
11 Photos
VG-EC except could use (minor set up, etc. - sold AS-IS), transparent gloss black finish with matching headstock, offset double cutaway body, bolt-on maple neck, 24-fret rosewood fingerboard with dot inlays, 2 soapbar style pickups, volume, blend, and 2-band EQ, black hardware, top-load bridge, 34" scale, 1-9/16" nut width, built in Indonesia (SN:IR0318829)
55U-4284
$199.00
|
FENDER® FA-1250S NAT (2008)
12 Photos
EC except could use minor work (lower action, restring and set up, etc. sold AS-IS), gloss natural finish, folk size, solid spruce top with scalloped bracing, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with dot inlays, rosewood bridge, 15" lower bout, 25.4" scale, 1-21/32" nut width, 3-1/4" to 3-3/4" body depth, black-bound body, chrome tuners, built in China, with gigbag (SN:CSE08000867)
20U-12558
$159.00
|
FENDER® MUSICMASTERTM (1979)
13 Photos
EC except white finish very checked with some flaking like '79 Anniversary Strats often are and needs work (minor fret level, setup, etc. - sold AS-IS), bolt-on maple neck (with some nice birdseye figure), 22-fret rosewood fingerboard with pearl dot inlays, ~1-5/8" nut width, 24" scale, one single coil pickup with black cover, black strat®-style knobs, b-w-b pickguard, chrome hardware, pots and pickups date to 1979, appears all original, with OHSC (orange lining, torn endcaps) (SN:S809454)
30U-15813
$625.00
|
FENDER® MUSTANG® (1966)
12 Photos
VGC, red finish, slightly larger than normal neck marked 8 JAN 66B, rosewood fretboard, dot markers, 22 frets, neck pickup, pots (dated 42nd week of '65), switches, pickguard, tremolo, bridge, tuners and hardware are all original, Schaller pickup installed at bridge (direct fit), sold AS-IS (needs trem arm, fret work, clean up, strings, set up, etc.), 1-5/8" nut, 24" scale, with gigbag (SN:115337)
30U-15783
$925.00
|
FENDER® SQUIER® AFFINITY TELECASTER® (2008)
11 Photos
EC- except needs minor work (polish frets, minor setup, etc. - sold AS-IS), Affinity SeriesTM, vintage white finish, white pickguard, bolt-on maple neck, 21-fret maple fingerboard with black dot markers (no skunk stripe), chrome hardware, 2 single coil pickups, 3-way switch, one volume and one tone control, 25.5" scale, 1-5/8" nut width, built in China (SN:CY081025775)
30U-15642
$135.00
|
FENDER® STRATACOUSTICTM (2000's)
12 Photos
EC- except could use some work (shim neck, restring and minor set up, etc. - sold AS-IS), acoustic-electric, stratocaster® shaped hollow body, white finish, white-bound spruce top with oval soundhole, X-braced, one-piece fiberglass body, bolt-on maple neck, 21-fret rosewood fingerboard with dot inlays, 1-21/32" nut width, 25-1/2" scale, 12-1/2" lower bout, ~2-1/2" body depth, rosewood bridge, factory Fender® pickup system with volume and 4-band EQ, chrome tuners, missing inside label, built in China, with Superior gigbag
20U-12480
$225.00
|
G.J. GOULD AND SON MODEL CRB-395 (1980's?)
13 Photos
EC- except could use work (repair or replace tuners - G and B very sloppy, restring and set up, etc. - sold AS-IS), solid spruce top, rosewood back and sides, mahogany neck, 19-fret rosewood fingerboard, side dot markers at 7th and 12th frets, rosewood bridge, 14-1/4" lower bout, 650mm scale, 51mm nut width (2"), 3-3/4" to 4" body depth, black-bound body, gold tuners, label reads "Made especially for / G. J. Gould and Son / designers of fine handcrafted guitars", import model, with lined SSC (SN:87004)
28U-2283
$345.00
|
GIBSON B-15 (1968)
14 Photos
VG-EC except could use some work (would benefit from a neck reset, action is good now, restring and set up, etc. - sold AS-IS), small body, 14-1/4" lower bout, 3-1/2" to 4-1/2" body depth, ~24-3/4" scale, 1-9/16" nut width, ladder braced solid spruce top, mahogany sides and back, 14-fret mahogany neck with narrow headstock (like a Melody Maker), 20-fret Brazilian rosewood fingerboard with pearloid dot inlays, rectangular bridge with adjustable saddle, thick black pickguard and truss rod cover, black decal headstock logo, 3-on-a-plate open gear tuners with white plastic oval buttons, names and numbers engraved on truss rod cover and back of headstock, satin natural finish, with rough SSC (SN:818427)
20U-12469
$500.00
|
GIBSON B25-12 (1965)
16 Photos
VG-EC except for unplugged jack hole in treble side and needs some work (repair small cross-grain side crack at near end block on treble side, strings, setup, etc. - sold AS-IS), 14-1/4" lower bout, 3-1/2" to 4-3/8" body depth, X-braced natural finished spruce top, cherry finished mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with pearloid dot inlays, large Brazilian rosewood bridge with adjustable saddle, trapeze tailpiece, 6-on-a-plate Kluson Deluxe tuners with white plastic buttons, white-bound body, b-w top purfling, w-b-w soundhole rosette, tortoise plastic pickguard, 24-3/4" scale, 2" nut width, Barcus Berry pickup installed with 1/4" endpin jack (SN:330620)
26U-1876
$950.00
|
GIBSON C-1 CLASSIC (1963)
14 Photos
VG-EC except needs some work (reset neck, dress frets, clean, setup, etc. - sold AS-IS), 00-size, 14-1/4" lower bout, solid spruce top, solid mahogany back and sides, 12-fret mahogany neck, 19-fret rosewood fingerboard with side dot markers, zero fret, 2" nut width, 25-1/2" scale length, rosewood bridge, tortoise plastic bound body, decal for soundhole rosette, open gear 3-on-a-plate tuners with white plastic buttons, with SSC (black lining) (SN:116005)
28U-2288
$200.00
|
GIBSON F-2 (1917)
11 Photos
VG-EC except needs work (glue loose top brace, reglue top and back side seams, glue headstock scroll crack, level and dress frets, strings, set-up, etc. - sold AS-IS), red sunburst carved spruce with oval soundhole, red stained birch sides and carved back, 2-piece mahogany neck with dark center strip, 24-fret ebony fingerboard, pearl dot inlays, 1-3/16" nut width, ~14" scale length, ebony bridge, ivoroid-bound top, soundhole and fretboard, pearl "The Gibson" headstock inlay, engraved tailpiece cover, tortoise plastic pickguard stamped "PAT.MAR.30,'09", pickguard mount stamped "PAT.JULY 4,1911", 4-on-a-plate open-gear Handel tuners, a fine example, with black OHSC (red lining), price reduced (SN:33645)
90U-5085
$3,000.00
|
GIBSON HARLEY DAVIDSON LIMITED EDITION (1994)
12 Photos
EC except could use work (refret to true and straighten fingerboard, restring and set up, etc. - sold AS-IS), #192 of 1500, gloss black finish, 15-3/4" lower bout, 3-3/4" to 4-5/8" body depth, all solid woods, spruce top, maple back and sides, 14-fret maple neck, white-bound 20-fret ebony fingerboard with pearl shield inlays, 1-23/32" nut width, 24-3/4" scale, ebony belly bridge, dual black pickguards (stenciled "Harley-Davidson"), w-b-w double-bound, body, pearl headstock inlays of Gibson and H-D logos, nickel tuners, 100th Anniversary interior label, these guitars were originally sold at Harley dealerships, with certificate of authenticity, and black wooden OHSC (Harley orange lining), price reduced (SN:92294012)
20U-11547
$1,600.00
|
GIBSON L-C CENTURY (c.1934)
17 Photos
VG-EC except needs work (glue heel crack, reset neck, truss rod is at maximum adjustment - heat press neck, reglue bridge and pickguard, dress frets, strings, setup, etc. - sold AS-IS), 14-1/2" lower bout, sunburst finish, X-braced spruce top, figured maple back and sides, 14-fret mahogany V-neck, 19-fret white pearloid fingerboard with rosewood rectangles (into which are inlaid pearl diamonds and squares), 1-3/4" nut width, 24-3/4" scale, rectangular rosewood bridge, firestripe pickguard, white-bound body, w-b-bound headstock and fingerboard, pearl "Gibson" script logo and large slotted diamond inlaid in rosewood on headstock, pearloid truss rod cover, 3-on-a plate open gear tuners with white buttons (these are very good replacement for original tuners), "Century of Progress" model, with modern Harptone HSC (SN:855)
20U-12384
$2,950.00
|
GIBSON LG-0 (c.1968)
14 Photos
VG-EC except needs work (dress frets, reglue loose bridge and setup, etc. - sold AS-IS), all mahogany, small body, ladder braced top, 14-1/4" lower bout, 3-1/2" to 4-3/8" body depth, 1-9/16" nut width, ~24-3/4" scale, screwed-on tortoise plastic pickguard, tortoise plastic-bound top, 14 fret mahogany neck, 20 fret rosewood fingerboard with pearloid dot inlays, replacement 3-on-a-plate open-gear tuners with chrome buttons, adjustable saddle reverse belly bridge, normal finish checking and a few dings, with recent thermoplastic HSC (green lining) (SN:056476)
20U-12433
$600.00
|
GIBSON TB-00 TENOR BANJO (1930's)
17 Photos
VG-EC except for added jewel and "M" on the headstock and small break in flesh hoop by neck joint and could use minor work (dress frets, restring and set up, etc. - sold AS-IS), 7/16" maple rim, sunburst finish maple neck and white-bound resonator, 19-fret Brazilian rosewood fingerboard with dot inlays, one-piece flange, single coordinator rod, ~11" skin head, 24 brackets, armrest, "GROVER PATENT" tailpiece, ~22-5/8" scale, 1-3/16" nut width, "GROVER PAT" pancake tuners, black peghead with white silkscreened script "Gibson" logo, white painted on purfling added to front of headstock, good candidate for conversion, with black OHSC (blue lining)
80U-2237
$1,800.00
|
GODIN SD (2009)
12 Photos
EC except needs minor work (polish frets, new strings, setup, etc. - sold AS-IS), Midnight (sparkle) Blue finish, single cutaway body, bolt-on flamed maple neck, 24-fret rosewood fingerboard with pearl dot inlays, Godin hum-single-single pickup configuration, 5-way blade switch, 1 volume, 1 tone, black plastic pickguard, 1-9/16" nut width, ~24-3/4" scale, assembled in the U.S.A. from parts handcrafted in Canada, with gigbag (SN:09425167)
30U-15809
$350.00
|
GOLD TONE 1-SS WEISSENBORN STYLE 3 (recent)
10 Photos
EC- except needs work (reglue pulled-up bridge, replace missing endpin, restring, setup, etc. - sold AS-IS), satin finish, sunburst solid spruce top, solid mahogany back and sides, black-bound body and neck with "rope" top trim and rosette ring, fret lines inlaid in fingerboard, pearl dot markers, gold vintage replica replica tuners, original Herman Weissenborn designed hollow neck extends into body cavity for unique tone, 24-5/8" scale, 2" nut width (SN:2604018)
50U-2061
$350.00
|
GUILD® GAD25 (recent)
12 Photos
EC- except needs some work (reglue bridge, dress frets, clean finish, setup, etc. - sold AS-IS), dreadnought body, 15-3/4" lower bout, natural gloss finish, solid mahogany top, back and sides, 14 fret mahogany neck with rosewood fingerboard, pearl dot inlays, 25-1/2" scale, 1-11/16" nut, rosewood bridge , bone nut and saddle, wood bindings, Chesterfield headstock logo, nickel Grover Rotomatic tuners, made in China (SN:GAD-27171)
20U-12669
$325.00
|
HAMER CENTAURA (c.1990)
12 Photos
EC- except needs some work (repair and/or replace electronics which at present are a mixture of active and passive, dress frets, setup, etc. - sold AS-IS), black and white "marbelized" finish, offset double cutaway body, bolt on maple neck with rosewood fingerboard, offset pearl dot inlays, 24 frets, single-single-hum pickups, replacement EMG humbucker in bridge position, 1 volume and 1 tone control, 5-way switch, Hamer / Scaller locking tremolo bridge and nut, 1-11/16" nut width, ~25-1/2" scale, reverse headstock witn 6-in-a-line sealed gear tuners, 5 dings in back of neck between 7th and 8th frets, lots of dings and scratches that are hard to see because of swirling black and white finish, made in USA, with loose fitting imported aluminum flight-style HSC (black lining) (SN:025377)
30U-15418
$475.00
|
HOHNER ECA800 ECLIPSE (recent)
13 Photos
EC except needs some work (reglue neck lamination behind headstock, setup, etc. - sold AS-IS), grand auditorium bowlback acoustic/electric, solid spruce top, parabolic body of cross-woven spherical alder "Gibbous Echo" soundhole design, maple binding, faux abalone purfling, 3 piece mahogany neck, pearloid ellipses inlays, ebony fingerboard, gold Gotoh tuners with ebony buttons, ANP-41 preamp with EQ, presence and an auto-tuner, AA Nubone nut and saddle by Tusq, scale length ~ 25.5", nut width ~ 1-11/16", made in Korea, with molded OHSC (black lining) (SN:SP02G10419)
20U-11965
$485.00
|
IBANEZ ART300 (2008)
11 Photos
EC except needs minor work (restring and set up, etc. - sold AS-IS), brown caiman textured gloss finish, mahogany single cutaway body and neck, black-bound maple top, set neck, black-bound 22-fret rosewood fingerboard, pearloid diamond and abstract inlays, 1-11/16" nut width, 25" scale, two IBZ-LZ active humbucking pickups, black chrome hardware, made in China (SN:S08110957)
30U-15855
$250.00
|
IBANEZ SOUNDGEAR SR-400
14 Photos
EC-, silver / gray finish, soundgear body, bolt-on neck, rosewood fretboard, dot inlays, 24 frets, PJ pickup configuration, active electronics, modern style bridge and tuners, sold AS-IS (needs backplate, clean up, strings, set up, etc.), 1-9/16" nut, 34" scale, with OHSC (SN:C02120116)
55U-4208
$235.00
|
IBANEZ SR400 SOUNDGEAR (2002)
10 Photos
EC-, except needs some work (trouble shoot electronics, neck pickup cuts out, replace screws in control cavity cover, setup, etc. sold AS-IS), light amber finish, offset double cutaway body, bolt-on 3-piece maple neck, 24 fret rosewood fretboard with dot inlays, smokey chrome hardware, body matching peghead overlay, 2 pickup configuration, (DXJ and DXP), active electronics, 1 volume, pickup blend, and 3-band EQ, replacement (home-made) control cavity cover, 34" scale, 1.5" nut width, made in Korea, price reduced (SN:02122525)
55U-4093
$200.00
|
KAY K5160 AUDITORIUM SIZE (c.1967)
13 Photos
EC++ except needs work (neck is slightly bowed which can probably be fixed only by a refret, realign neck on body, new strings, setup, etc. - sold AS-IS), sunburst top, back, and sides, painted "binding" and position dots, screwed-on white pickguard with distinctive logo, cool vertical metal logo plate, bolt-on neck, unusual stamped metal tailpiece with "K" logo, 25-1/2" scale, 1-1/2" nut width, except for the neck problems and a few top scuffs is cosmetically clean, clean, clean, with original Kay cardboard shipping box, made in USA
20U-11974
$250.00
|
KENTUCKY KM-500S (1990's)
13 Photos
EC- except needs work (dress frets, replace missing tailpiece cover, clean, restring and set up, etc. - sold AS-IS), A-style, sunburst finish, all solid woods, spruce top with f-holes, maple neck, back and rims, white-bound 26-fret rosewood fingerboard, dot inlays, 1-1/8" nut width, 14" scale, adjustable rosewood bridge, gold hardware, w-b-w-bound body, "Kentucky" and fleur-de-lis headstock inlays, 4-on-a-side open geared tuners with pearloid buttons, with shaped HSC (burgundy lining) (SN:19583)
90U-5235
$400.00
|
KRAMER FOCUS 7000 (1980's)
13 Photos
EC- except needs some work (dress frets, clean electronics, repair or replace microphonic bridge pickup, setup, etc. - sold AS-IS), offset double cutaway body, black finish, bolt-on neck, rosewood fingerboard, pearl dot inlays, 21 frets, passive P-bass and double J pickup configuration, 2 volume controls, tone control, 3-way pickup selector switch, and coil switch for bridge pickup, built in Japan, with Fender® thermoplastic HSC (black lining) (SN:65778)
55U-4371
$300.00
|
KRAMER PACER FT211S (recent)
11 Photos
EC- except needs work (fingerboard tips up at upper frets - heat press neck and level frets to compensate, clean electronics, replace jack, restring and set up, etc. - sold AS-IS), black finish (EBGDAE scratched on back), bolt-on maple neck, 22-fret rosewood fingerboard, 1-11/16" nut width, 25-1/2" scale, H-S-S pickup configuration, vibrato bridge, black hardware, likely made somewhere in Asia (SN:IS00010645)
30U-15702
$95.00
|
LEWIS & SON TON KLAR
9 Photos
G-VGC except needs work (poorly repaired crack on the bass side of the top running from the saddle to the upper eye of the f-hole, large ding to lower bass edge on top, is set up and plays but bridge is too low, etc.), sold in AS-IS condition, German, circa 1980-90's, with shaped case (SN:NO.1917 10090)
110U-5592
$150.00
|
MARTIN 0-17 (1934)
14 Photos
VG-EC except needs work (possible refret to straighten slight neck warp, make repro bridge - this one has been lowered in height, reset neck, strings, setup, etc. - sold AS-IS), 13-5/8" lower bout, all mahogany body, scalloped bracing, 14-fret mahogany neck, 20-fret Brazilian rosewood fingerboard with micro-dot inlays, tortoise plastic pickguard, 24.9" scale, 1-3/4" nut width, replacement Martin tuners with butterbean buttons, Brazilian rosewood peghead overlay, with SSC (very worn and duct-taped together, a worthy project! (SN:56054)
10U-5104
$2,450.00
|
MARTIN BACKPACKER (recent)
10 Photos
VGC+ but needs minor work (dress frets, heat press minor warp out of neck, strings, setup, etc. - sold AS-IS), small body (~7-7/8" body width) travel guitar with solid spruce top, solid mahogany sides and back, 15-fret rosewood fingerboard, dot markers, rosewood bridge, chrome tuners, natural satin finish, 1-11/16" nut width, 24-1/8" scale, built in Mexico, with gigbag (SN:34701)
10U-5223
$95.00
|
MARTIN D-16GT (2000)
14 Photos
EC- except needs some work (glue and cleat top crack below bridge, dress frets, setup, etc. - sold AS-IS), 15-5/8" lower bout, gloss finished solid spruce top, all solid woods, satin finished mahogany back and sides, 14-fret mahogany neck, 20-fret striped ebony fingerboard with pearl dot inlays, herringbone soundhole trim, striped ebony bridge , scalloped bracing, black body binding, tortoise plastic pickguard, chrome tuners, 1-11/16" nut width, 25.4" scale, with flat-lid HSC (green lining) (SN:769251)
10U-5233
$625.00
|
MARTIN D-18 (1969)
14 Photos
EC- except needs work (reset neck, refret to straighten neck, reglue pickguard, glue top crack, install new strap button, strings, setup. etc. - sold AS-IS), 15-3/4" lower bout, spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with pearl dot inlays, 1-11/16" nut width, 25.4" scale length, Brazilian rosewood bridge, black body binding, black plastic pickguard, Brazilian rosewood peghead overlay, chrome Grover Rotomatic tuners read "PAT.PEND. U.S.A.", Barcus-Berry 1/4" endpin jack installed (no pickup), with HSC (black lining), price reduced (SN:255541)
10U-4889
$1,900.00
|
MARTIN D-28 (1978)
14 Photos
VG-EC except needs some work (reset neck, dress frets, repair damaged bridge plate, setup, etc. - sold AS-IS), D size body, spruce top, rosewood back and sides, 14-fret mahogany neck, ebony fretboard (finger tip wear has been epoxy filled in frets 1 through 7), dot inlays, 20 frets, ebony bridge, black plastic pickguard, gold Grover Rotomatic tuners installed, bridge pickup has been removed but endpin jack remains, 1-11/16" nut, 25.4" scale, with Martin thermoplastic OHSC (brown lining) (SN:401678)
10U-4905
$1,600.00
|
MARTIN D12-28 (1972)
14 Photos
VG-EC, except needs work (reglue bridge, repair small top crack in lower treble bout, dress frets, setup, etc. - sold AS-IS), D-size, 15-3/4" lower bout, spruce top, rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with pearl dot inlays, 1-7/8" nut width, 24.9" scale, ebony bridge, white-bound body with b-w-b-w-b top purfling, replacement tortoise plastic pickguard, nickel 6-on-a-plate Grover tuners, with tweed HSC (brown lining) (SN:310247)
26U-1821
$1,450.00
|
MARTIN DM (1999)
14 Photos
EC except could use some minor work (slightly sunken top, dress frets, strings, setup, etc. - sold AS-IS), D-size, 15-5/8" lower bout, natural satin finish, solid spruce top, mahogany back and sides, 14 fret mahogany neck, 20 fret rosewood fingerboard with pearl dot inlays, 1-11/16" nut width, 25.4" scale, rosewood bridge, tortoise plastic pickguard, herringbone soundhole rosette, black body binding, chrome tuners, with flat-lid OHSC (green lining) (SN:719592)
10U-5118
$525.00
|
MICHAEL KELLY DRAGONFLY CUSTOM II (2004)
14 Photos
EC except needs minor work (restring, tweak setup, etc. - sold AS-IS), 2004 Limited Edition, all solid woods, carved spruce top, flamed maple back, rims, and neck, white-bound 24-fret radiused ebony fingerboard with scalloped treble extension and pearl vine inlay, 1-1/8" nut width, 14" scale, adjustable ebony bridge, gold hardware, w-b-w-bound top and headstock, white-bound back, pearl "MK" and vine headstock inlays, gold tuners with pearloid buttons, made in Korea, with shaped HSC (burgundy lining) (SN:2405064)
90U-5435
$575.00
|
NO LABEL HAWAIIAN GUITAR (1938)
13 Photos
VGC+ except could use some work (reglue lifting bridge and a couple of open side seams, strings, etc. - sold AS-IS) 13-1/4" lower bout, 3-3/8" to 3-5/8" body depth, sunburst finished birch body, round soundhole, 12-fret V-shaped neck with metal extension nut for Hawaiian playing, 18 frets, solid headstock, 3-on-a-plate open-gear tuners with black plastic buttons, screwed-on wood bridge, painted-on white soundhole purfling, 1-3/4" nut width, ~24-1/8" scale, finish removed from around bridge - likely due to a previously bridge reglue, includes original bill of sale from Honolulu Conservatory of Music, with OSSC
50U-1919
$100.00
|
NO NAME CLASSICAL GUITAR
13 Photos
EC- except needs some work (dress frets, setup, etc. - sold AS-IS), 14-3/4" lower bout, 2-1/16" nut width, 665mm scale, 3-3/4" to 4-1/16" body depth, solid cedar top, rosewood back and sides, 12-fret mahogany neck with slotted headstock, 19-fret ebony fretboard, rosewood bridge, engraved tuners, decorative side purflings, soundhole rosette and backstripe, likely built in Japan, no label, gray fabric covered semi-hard case (purple lining) (SN:750808)
28U-2289
$250.00
|
OLYMPIA OJ4-CE (recent)
12 Photos
EC- except needs some work (dress frets, clean, setup, etc. - sold AS-IS), transparent red high gloss finish, mini-jumbo size acoustic/electric cutaway guitar, ~15-1/4" lower bout, spruce top, flamed maple back and sides, 14-fret mahogany neck with rosewood fingerboard, 20 frets, pearl dot inlays, white multi-body binding, volume, bass, treble and notch controls, sealed gear chrome tuners, 1-11/16" nut width, ~25-5/8" scale, made in Orient
20U-12544
$100.00
|
OSCAR SCHMIDT OM10 (1990's)
13 Photos
EC- except needs work (level and dress frets or refret, restring and set up etc. - sold AS-IS), A-style, sunburst finish all around, spruce top with f-holes, mahogany back and sides, maple neck, 21-fret rosewood fingerboard with dot inlays, chrome hardware, white body binding, b-w top purfling, b-w pickguard, ~13-3/4" scale, 1-1/8" nut width, built in Korea, with shaped Canadian HSC (burgundy lining) (SN:8080541)
90U-5417
$125.00
|
OVATION 1612 CUSTOM BALLADEER (late 1970's)
12 Photos
EC- except needs work (clean electronics / jack, dress frets, restring and set up, etc. - sold AS-IS), acoustic-electric, deep bowl, gloss natural finished solid spruce top, 5-piece mahogany / maple neck, 20-fret ebony fingerboard with dot and diamond inlays, pinless walnut bridge, 15-3/4" lower bout, 25.4" scale, 1-11/16" nut width, factory pickup with volume control, chrome tuners, original serial number tag has been replaced (but serial number fits for this time period), built in the U.S.A., with brown OHSC (rust colored lining) (SN:122883)
20U-12587
$485.00
|
OVATION 1867 LEGEND (1993)
13 Photos
EC except needs minor work (glue small fingerboard crack at 14th fret, restring, setup, etc. - sold AS-IS), acoustic-electric, rounded cutaway, super shallow bowl, tobacco burst finish, spruce top, 5-piece 14-fret mahogany / maple neck, pinless walnut bridge, chrome Schaller tuners, white-bound 20-fret ebony fingerboard with pearloid dot, diamond and square inlays, w-b-w-b-w-b-w-b top purfling, factory OP24 pickup system with volume and 3-band EQ, 15-7/8" lower bout, 25.4" scale, 1-11/16" nut width, built in the U.S.A., with black thermoplastic OHSC (light blue lining) (SN:470396)
20U-12337
$525.00
|
OVATION 1867 LEGEND (2001)
13 Photos
EC- except needs some work (dress frets, glue and fill open seam on neck lamination, setup, etc. - sold AS-IS), rounded cutaway, super shallow bowl, cherry cherryburst finish, spruce top, 14-fret mahogany neck, white-bound 20-fret ebony fingerboard with pearloid dot and diamond inlays, 1-11/16" nut width, 25-1/2" scale, pinless bridge, white-bound top, gold tuners, factory pickup / preamp system, made in the USA, with thermoplastic HSC (black lining) (SN:560997)
20U-12107
$485.00
|
OVATION CSE44 CELEBRITY (c.2008)
13 Photos
EC except could use minor work (dress frets, restring and set up, etc. sold AS-IS), acoustic-electric, rounded cutaway, honeyburst finished solid spruce top with Adamas style soundholes, 14-fret mahogany neck, white-bound 23-fret rosewood fingerboard with abalone triangle-shaped inlays, pinless bridge, factory Ovation OP30 pickup system with built in tuner, 15-3/4" lower bout, 25.4" scale, 1-5/8" nut width, mid-depth bowl, w-b-w-b top purfling, gold tuners, built in Korea, with wooden semi-HSC (SN:7110565)
20U-12603
$450.00
|
PEAVEY AXCELERATOR 2-T FRETLESS (1998)
13 Photos
EC except needs some work (repair neck, truss rod is at maximum adjustment, neck is straight now, setup, etc. - sold AS-IS), metallic black finish, offset double cutaway solid body, bolt on maple neck, fretless 4 string, rosewood fretboard, no lines side dots only, 2 soap bar type pickups, active electronics with volume, blend and 2-band EQ, satin chrome 2-Tek bridge, pearloid-b-w pickguard, chrome sealed gear tuners, 35" scale, 1-5/8" nut width, 9.8 lbs, made in USA, with thermoplastic OHSC (black lining) (SN:09220932)
55U-4282
$385.00
|
PEAVEY EVH WOLFGANG SPECIAL (1999)
13 Photos
EC except needs work (level and dress frets, clean dirty volume pot, restring, setup, etc. - sold AS-IS), black finish, basswood body, bolt-on maple neck, 22 frets, 1-5/8" nut width, 25-1/2" scale, 2 humbucking pickups, 3-way switch and single volume control, tune-o-matic bridge and stop bar tailpiece, chrome hardware, locking tuners with pearloid buttons, made in the USA, with thermoplastic OHSC (SN:91020930)
30U-15857
$500.00
|
PEAVEY REACTOR
12 Photos
EC- except needs minor work (polish frets, restring, setup, etc. - sold AS-IS), black finish, single cutaway body, maple neck and 22-fret fingerboard, black dot markers, 2 single coil pickups, 1 ply off-white pickguard, 1-11/16" nut, 25-1/2" scale, made in USA, with Peavey gigbag (SN:09036438)
30U-15858
$225.00
|
RAINSONG WS1000
15 Photos
EC- except for filled 1/2" top ding and needs work (neck has slight bow - and no truss rod - plus level and dress frets, setup, etc. - sold AS-IS), 15-3/4" lower bout, tapered waist, rounded cutaway, patterned graphite top, back, sides and neck, body depth tapers from 4-3/8" to 5-1/8", black graphite fretboard with abalone shark inlays, "Rainsong" inlaid at 12th fret, abalone soundhole rosette, onboard Fishman Blender, ~25.5" scale, 1-11/16" nut width, built in Hawaii, good sound, with TKL HSC (blue lining) (SN:3626)
20U-12389
$950.00
|
REGAL RD35BS (c.2005)
12 Photos
EC- except could use minor work (recut nut, clean, restring and minor set up, etc. - sold AS-IS), 12-fret square neck with slotted headstock, gloss black finish, mahogany back and sides, spruce top, white-bound body and fretboard, 19-fret rosewood fingerboard with dot inlays, dual screenholes, fan coverplate, soundwell, 15" lower bout, ~24-3/4" scale, 2" nut width, ~3-5/8" body depth, replacment upgraded cone and No. 14 spider bridge installed, import model
50U-2035
$325.00
|
RODRIGUEZ MODEL A CUTAWAY (recent)
14 Photos
EC except could use minor work (cut nut slots, lower action, restring and set up, etc. - sold AS-IS), classic-electric, rounded cutaway, solid cedar top, rosewood back and sides, Spanish Cedar neck, 19-fret rosewood fingerboard with side dot markers, rosewood bridge, 14-3/8" lower bout, 650mm scale, 47mm (1-27/32") nut width, ~3-7/8" body depth, factory L.R. Baggs active Element pickup, gold tuners, the label reads "Hand Craft in Spain - Europe", with rough, oversized SSC (SN:5422)
28U-2276
$550.00
|
ROSS RE-112-HS SPEAKER (1970's)
2 Photos
VG except needs some work (replace hi-frequency horn, remount upside down handle, replace missing stand mount, etc. - sold AS-IS), 1x12" and horn full range speaker cabinet, built in crossover, black epoxy-type finish on cabinet, Pyle 12" speaker replaces Fane original blown piezo horn, price reduced * Sorry, we no longer ship used amps. In-store sales only! * (SN:1364)
130U-8439
$35.00
|
ROVER RM-50 (recent)
10 Photos
EC except needs work (neck has slight neck bow - no truss rod - refret or heat press to straighten, setup, etc. - sold AS-IS), A-style, sunburst top finish, dark-finished back, sides and neck, solid spruce top with f-holes, solid maple back and sides, white-bound 20-fret rosewood fingerboard, dot inlays, 1-1/8" nut width, ~13-7/8" scale, adjustable rosewood bridge, white-bound body, built in China (SN:0601127)
90U-5315
$70.00
|
SCHECTER C-1+ (1999)
13 Photos
- EC except could use minor work (dress frets, restring and set up, etc. - sold AS-IS), Diamond Series, tobacco sunburst finish on flamed maple top, deep brown finish on mahogany body and set neck, 24-fret rosewood fingerboard, pearloid and abalone inlays, 1-11/16" nut width, 24-3/4" scale, two Duncan designed humbucking pickups, 3-way toggle switch, 2 volume and one tone control, strings anchor thru body, t-o-m-style bridge, Grover tuners, chrome hardware, built in Korea, with thermoplastic OHSC (black lining) (SN:99005424)
30U-15746
$335.00
|
SCHECTER EXOTIC 4-STRING (2005)
11 Photos
EC- except needs work (resolder output jack, replace batteries and clean battery clip, restring and set up, etc. - sold AS-IS), Diamond Series, natural satin finish, 5-piece wenge / bubinga neck through body, zebrawood top on mahogany body wings, 24-fret rosewood fingerboard, dot inlays, 1-1/2" brass nut, 34" scale, zebrawood headstock overlay, two Duncan Design SB-101 pickups, active tone circuit, Diamond Custom bridge, gold hardware, import model (SN:S050210757)
55U-4293
$425.00
|
SEAGULL MARITIME CW GT QII (recent)
14 Photos
EC except could use minor work (shim or replace saddle, restring and set up, etc. - sold AS-IS), mini jumbo body, acoustic-electric, rounded cutaway, all solid woods, gloss finished cedar top, satin finished mahogany back and sides, 14-fret mahogany neck, 16-1/8" lower bout, 24.9" scale, 4" to 4-7/8" body depth, 1-13/16" nut width, factory Godin Quantam II pickup / microphone system, rosewood bridge, chrome tuners, cream-bound body, tortoise plastic pickguard, built in Canada, replacement nut, with Roadrunner gigbag (SN:029334000762)
20U-12548
$450.00
|
SILVERTONE (1960's)
14 Photos
EC- except needs work (adjust neck angle, dress frets, restring and setup, etc. - sold AS-IS), black neck and rim, white-bound sunburst resonator, 22 fret rosewood fingerboard with dot inlays, single coordinator rod, 16 brackets, guitar style tuners, friction 5th string peg, ~11" head, 27-3/8" scale, 1-5/32" nut width, made for Sears by Kay in the U.S.A., with Gibson SSC (brown alligator exterior)
70U-3266
$110.00
|
SILVERTONE 1448 (c.1961)
20 Photos
VGC except needs work (heat press neck to straighten, dress frets, clean pots and rusty parts, replace incorrect bridge screws, replace tuners buttons, setup, etc. - sold AS-IS), black sparkle formica top and back, white ribbed plastic sides, bolt-on neck, 18-fret rosewood fingerboard with white dot inlays, 1-11/16" nut width, ~23-5/8" scale length, one split lipstick tube pickup, made by Danelectro for Sears, pots date to 42nd week of 1961, with OHSC (speaker has been removed, missing volume knob, bad power cable, we don't know if the amp works or not, case is warped and closes poorly), price reduced (SN:1072)
30U-15173
$250.00
|
TACOMA® JM16C12 (2000)
15 Photos
EC, except that finish is lifting in the cutaway and on the treble side waist, plus needs work (could use neck reset, restring, setup, etc. - sold AS-IS), jumbo body, rounded cutaway, 16-7/8" lower bout, 4" to 4-3/4" body depth, solid spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with abalone dot inlays, rosewood bridge, gloss natural finish, rosewood peghead overlay with vertical ivoroid "Tacoma®" logo, ivoroid-bound body, fretboard and headstock, b-w-b top purfling, abalone soundhole rosette, chrome tuners, 25.5" scale, 1-7/8" nut width, built in the U.S.A., with brown OHSC (blue lining, replacement handle), price reduced (SN:D1580100)
26U-1763
$450.00
|
TAKAMINE EF261S (1998)
14 Photos
EC- except needs work (level frets, cleanup, restring, setup, etc. - sold AS-IS), Noveau Series, acoustic-electric, rounded cutaway, small body, 14-3/4" lower bout, Takamine calls this body style FXC / Artist, gloss antique stain finish, solid cedar top, mahogany back and sides, 14 fret mahogany neck, 20 fret rosewood fingerboard with dot inlays, rosewood bridge with split saddles, chrome Gotoh tuners, factory Takamine Graph-EX pickup system, w-b-w-b-w-b double bound body, ~25.5"scale, 1-11/16" nut width, 3-11/16" to 3-7/8" body depth, with (oversize) TKL brand thermoplastic HSC (with broken hinge) (SN:98111205)
20U-12366
$425.00
|
TAKAMINE EG522C (recent)
14 Photos
EC except could use some work (raise action slightly, restring and set up, etc. - sold AS-IS), G-Series, classic-electric, rounded cutaway, spruce top, mahogany back & sides, 12-fret mahogany neck with rosewood fingerboard, 19-frets, rosewood bridge, 650mm scale, 51mm nut width, 14-1/4" lower bout, ~4" body depth, factory Takamine TK40 pickup system, gold open geared tuning machines with pearloid buttons, gloss natural finish, built in Korea, with Road Runner thermoplastic HSC (green lining) (SN:7411734)
28U-2249
$425.00
|
TAYLOR BABY 301-GB (2001)
12 Photos
EC except needs minor work (air out smoke smell, polish frets, restring and tweak setup, etc. - sold AS-IS), 3/4 sized D-shape, solid spruce top, mahogany sides and arched back, bolt-on 14-fret mahogany neck, 19-fret ebony fingerboard, dot inlays, 1-11/16" nut width, 22-3/4" scale, ebony bridge, engraved rosette, chrome tuners, passive undersaddle pickup installed with endpin jack, with Taylor gigbag (SN:20010112312-3)
20U-12674
$175.00
|
UNITED MANDOLIN (c.1950)
12 Photos
EC- except needs minor work (level frets, setup, etc. - sold AS-IS), A-style, 9-1/4" body width, slightly arched laminate maple top and back, sunburst finished body, sides, neck and headstock, painted on white faux binding, segmented f-holes, maple neck with rosewood stained maple fingerboard, dot inlays, 18 frets, black painted bridge, clamshell stamped steel tailpiece, 4-on-a-plate rivited gear tuners with black buttons, tuners are pinned to headstock, "UNITED" gold banner logo decal on headstock front, appears to be made much in the style of other distributor mandolins such as Harmony, Regal and Kay Kraft, likely made by United Musical Instruments in Elizabeth, NJ, nice sound, ~1-1/4" nut width, ~14" scale, with earlier period HSC (purple lining)
90U-5440
$300.00
|
WARWICK ROCKBASS CORVETTE IV (2004)
13 Photos
EC except could use minor work (dress frets, setup, etc. - sold AS-IS), gloss transparent black finish, double cutaway alder body, bolt-on maple neck, 24-fret rosewood fingerboard, side dots only, 1-1/2" nut width, 34" scale, two MEC J-style pickups, 2-band active EQ, chrome hardware, made in China, with thermoplastic HSC (black lining) (SN:RB SN J-046483 5-07)
55U-4344
$350.00
|
WASHBURN D-11 TBL (1998)
12 Photos
VG-EC except needs work (replace nut, dress frets, clean restring and set up, etc. - sold AS-IS), D-size, figured ash body, see-thru turquoise blue finish, 14-fret ash neck, 20-fret rosewood fingerboard with dot inlays, rosewood bridge, 15-3/4" lower bout, 3-7/8" to 4-7/8" body depth, 25.4" scale, 1-23/32" nut width, white-bound body and fretboard, b-w top purfling, chrome Grover Rotomatic tuners, tortoise plastic pickguard, built in China (SN:98090777)
20U-12497
$89.00
|
WASHBURN EA20SDLK (2007)
12 Photos
EC except could use minor work (restring, minor set up, etc. - sold AS-IS), acoustic-electric, sharp cutaway, gloss natural finish, solid spruce top with oval soundhole, quilted maple back and sides, 14-fret 3-piece maple neck, 21-fret rosewood fingerboard with dot inlays, white-bound body, fretboard and headstock, rosewood bridge, factory B-Band A3T pickup system with built in tuner, 16" lower bout, 3-1/8" to 3-1/2" body depth, 25-5/8" scale, 1-11/16" nut width, abalone soundhole rosette, b-w-b-w-b top purfling, chrome Grover 18-1 Rotomatic tuners with black plastic buttons, built in China, with blue thermoplastic OHSC (black lining, missing end buttons) (SN:G07070045)
20U-11990
$450.00
|
WASHBURN M-1S/TS (1992)
12 Photos
EC except needs minor work (light fret level where fingerboard extends over body, new strings, tweak setup, etc. - sold AS-IS), A-style with f-holes, sunburst finished solid spruce top, dark stained maple back, sides and neck, 20 fret rosewood fingerboard with dot inlays, adjustable rosewood bridge, white-bound body and fretboard, b-w-b top purfling, raised black-white pickguard, chrome hardware including "George Washburn" engraved tailpiece cover, ~13-7/8" scale, 1-1/8" nut width, ~2" body depth, 10-3/8" body width, old-style headstock (Lyon and Healy shape), built in Korea, with chipboard SSC (SN:9205138)
90U-5321
$325.00
|
WASHBURN MERCURY (recent)
11 Photos
EC- except needs work (level and dress frets - neck is a little uneven with more relief on the bass side - clean electronics, restring, setup, etc. - sold AS-IS), black finish with blue and orange flames painted on top, bolt-on maple neck with 22-fret rosewood fingerboard, double cutaway body, humbucker-single-single pickups with volume, tone, 5-way switch, tremolo bridge (missing arm), 25-1/2" scale, 1-11/16" nut width, Grover Mini-Rotomatic tuners, made in Asia (SN:5043568)
30U-15643
$70.00
|
WASHBURN RB2000 BANTAM (1999)
12 Photos
EC- except needs some work (install 9-volt battery, clean electronics and hardware, polish frets, setup, etc. - sold AS-IS), natural finish, Bantam Series, offset double cutaway body, bolt-on maple neck, 24 fret rosewood fingerboard, offset pearl dot inlays, 1 humbucking pickup, brushed chrome hardware, strings-thru-body bridge, 1-1/2" nut width, 34" scale, made in Korea (SN:CK99100008)
55U-4214
$275.00
|
WASHBURN WI14 (c.2005)
11 Photos
EC except needs minor work (clean electronics, restring, setup, etc. - sold AS-IS), metallic light blue body, 22-fret bolt-on maple neck with rosewood fingerboard, dot inlays, two humbucking pickups, 2 volume, 2 tone, 3-way switch, 6-piece adjustable bridge with strings through body, 25-1/2" scale, 1-5/8" nut width, made in China (SN:05119458)
30U-15404
$85.00
|
YAMAHA APX-7 (1990's)
14 Photos
EC- except needs some work (polish frets, clean electronics, borderline for neck reset, setup, etc. - sold AS-IS), rounded cutaway, black finish, spruce top with oval soundhole, agathis back and sides with synthetic outside coating, 14-fret mahogany neck, 24 fret rosewood fingerboard with dot inlays, composite bridge, white-bound body, fretboard and headstock, b-w-b-w top purfling, black peghead overlay with block "YAMAHA" logo, gold tuners, factory Yamaha pickup system with volume, bass, treble and blend controls, 15-1/8" lower bout, 25.5" scale, 1-11/16" nut width, 3" to 3-3/8" body depth, made in Taiwan, with brown wooden OHSC (burgundy lining) (SN:81028006)
20U-11909
$250.00
|
YAMAHA RBX264 (2003)
13 Photos
EC- except needs minor work (clean and adjust electronics, rewire tone control, dress frets, setup, etc. - sold AS-IS), black finish, offset double cutaway alder body, bolt-on maple neck, 24-fret rosewood fingerboard, dot inlays, 1-9/16" nut width, 34" scale, one split-coil pickup, chrome hardware, great student bass, with rough thermoplastic HSC (black lining) (SN:MN30270)
55U-4261
$135.00
|
YAMAHA RGZ121P (c.1988)
12 Photos
VG-EC except needs some work (dress frets, clean electronics, setup, etc. - sold AS-IS), offset double cutaway with pointed horns, metallic blue finish, maple neck with rosewood fingerboard, 22 frets, dot inlays, 1-9/16" nut width, 25-1/5" scale, 6-in-a-line sealed gear tuners, hum-single-hum pickup configuration, 1 volume and 1 tone control, 5-way pickup switch, vintage style tremolo, made in Taiwan, with gigbag
30U-14988
$150.00
|
 other vintage and used categories . . .
|
|
|
|
| 
