VGC+ except needs some work (glue, level and dress frets, restring, set up, etc. - sold AS-IS), 3/4 size (12-1/2" lower bout), all laminated construction, spruce top, mahogany back, sides and neck, 1-3/4" nut width, 24" scale, decal rosette, made in Romania, with chipboard SSC
28U-2248
$40.00
GIBSON C-1 CLASSIC (1963)
14 Photos
VG-EC except needs some work (reset neck, dress frets, clean, setup, etc. - sold AS-IS), 00-size, 14-1/4" lower bout, solid spruce top, solid mahogany back and sides, 12-fret mahogany neck, 19-fret rosewood fingerboard with side dot markers, zero fret, 2" nut width, 25-1/2" scale length, rosewood bridge, tortoise plastic bound body, decal for soundhole rosette, open gear 3-on-a-plate tuners with white plastic buttons, with SSC (black lining) (SN:116005)
28U-2288
$200.00
|
NO NAME CLASSICAL GUITAR
13 Photos
EC- except needs some work (dress frets, setup, etc. - sold AS-IS), 14-3/4" lower bout, 2-1/16" nut width, 665mm scale, 3-3/4" to 4-1/16" body depth, solid cedar top, rosewood back and sides, 12-fret mahogany neck with slotted headstock, 19-fret ebony fretboard, rosewood bridge, engraved tuners, decorative side purflings, soundhole rosette and backstripe, likely built in Japan, no label, gray fabric covered semi-hard case (purple lining) (SN:750808)
28U-2289
$250.00
|
G.J. GOULD AND SON MODEL CRB-395 (1980's?)
13 Photos
EC- except could use work (repair or replace tuners - G and B very sloppy, restring and set up, etc. - sold AS-IS), solid spruce top, rosewood back and sides, mahogany neck, 19-fret rosewood fingerboard, side dot markers at 7th and 12th frets, rosewood bridge, 14-1/4" lower bout, 650mm scale, 51mm nut width (2"), 3-3/4" to 4" body depth, black-bound body, gold tuners, label reads "Made especially for / G. J. Gould and Son / designers of fine handcrafted guitars", import model, with lined SSC (SN:87004)
28U-2283
$345.00
|
ALVAREZ 5080 (c.1984)
14 Photos
EC-, classic-electric, double bound 14-1/2" lower bout, thin body depth, cutaway, dark natural finish, cedar top, mahogany sides, back and neck, rosewood fretboard, side dot markers, 19 frets, rosewood bridge, under saddle pickup with volume and tone controls, slotted headstock, gold 3-on-a-plate tuners, 2" nut, 650mm scale, with semi-HSC, on consignment (SN:840097)
28U-2251
$350.00
|
TAKAMINE EG522C (recent)
14 Photos
EC except could use some work (raise action slightly, restring and set up, etc. - sold AS-IS), G-Series, classic-electric, rounded cutaway, spruce top, mahogany back & sides, 12-fret mahogany neck with rosewood fingerboard, 19-frets, rosewood bridge, 650mm scale, 51mm nut width, 14-1/4" lower bout, ~4" body depth, factory Takamine TK40 pickup system, gold open geared tuning machines with pearloid buttons, gloss natural finish, built in Korea, with Road Runner thermoplastic HSC (green lining) (SN:7411734)
28U-2249
$425.00
|
RODRIGUEZ MODEL A CUTAWAY (recent)
14 Photos
EC except could use minor work (cut nut slots, lower action, restring and set up, etc. - sold AS-IS), classic-electric, rounded cutaway, solid cedar top, rosewood back and sides, Spanish Cedar neck, 19-fret rosewood fingerboard with side dot markers, rosewood bridge, 14-3/8" lower bout, 650mm scale, 47mm (1-27/32") nut width, ~3-7/8" body depth, factory L.R. Baggs active Element pickup, gold tuners, the label reads "Hand Craft in Spain - Europe", with rough, oversized SSC (SN:5422)
28U-2276
$550.00
|
TAKAMINE C132S (1993)
11 Photos
EC, gloss natural finish, solid cedar top, rosewood back and sides, 12-fret mahogany neck with slotted headstock, 19-fret rosewood fingerboard, 2" nut width, 650mm scale, rosewood bridge, rosewood-bound body and fingerboard, gold tuners with pearloid buttons, made in Japan, on consignment, with HSC and case cover (SN:93040491)
28U-2290
$625.00
|
HOFNER MODEL HM86 (c.2004)
13 Photos
EC, cutaway, gloss natural finish, solid cedar top, rosewood back and sides, mahogany neck with center strip, 19-fret ebony fingerboard, side dot markers, ebony bridge, 15-1/8" lower bout, 650mm scale, 50mm (2") nut width, 3-3/8" to 3-3/4" body depth, attractive soundhole rosette, clear tap plates, gold tuners with wooden buttons, wood body bindings and purflings, with tweed TKL HSC (brown lining) (SN:D11211)
28U-2282
$750.00
|
MANUEL RODRIGUEZ MODEL A
12 Photos
EC, double bound 14-1/2" scale, solid cedar top, wood rostette, rosewood back and sides, sapele neck, rosewood fretboard, 19 frets, rosewood bridge, slotted headstock, 3-on-a-plate gold tuners, built in Spain, 2" scale, 650mm scale, with HSC (SN:1396)
28U-2178
$765.00
|
RODRIGUEZ MODEL E (recent)
12 Photos
EC-, all solid woods, cedar top, Indian rosewood back and sides, Honduran cedar neck with ebony center strip, 19-fret ebony fingerboard, rosewood bridge, rosewood peghead overlay, gold tuners with white pearloid-looking buttons, soundhole attractive soundhole rosette, 14-1/2" lower bout, ~3-7/8" body depth, 650mm scale, 51mm nut width, built in Spain, with nice Ritter gigbag (SN:1872)
28U-2268
$985.00
|
CORDOBA PRO-R (recent)
11 Photos
EC, natural (gloss) finish, double bound 14-1/2" body (rosewood binding), solid cedar top, fancy rosette, rosewood back and sides, ebony reinforced cedar neck, ebony fretboard, 19 frets, rosewood bridge and headstock overlay, quality instrument built in Spain, 2" nut, 650mm scale (SN:37030013)
28U-2256
$1,000.00
|
CORDOBA MODEL 75R (2000)
13 Photos
EC-, gloss natural finish, solid spruce top, solid Indian rosewood back and sides, ebony reinforced Spanish cedar neck, 19-fret ebony fingerboard, 2-1/32" (52mm) nut width, 650mm scale length, 14-5/8" lower bout, ~4" body depth, rosewood bridge, fancy soundhole rosette, rosewood-bound body, wood top purfling, rosewood peghead overlay, gold tuners, this model now called Pro R, built in Spain, with thermoplastic OHSC (black lining) (SN:79512)
28U-2192
$1,085.00
|
HIRADE MODEL 8 (1986)
13 Photos
VG-EC, 14-1/2" lower bout, ~3-3/4" body depth, 660mm scale, 2-1/16" nut width, solid spruce top, solid rosewood back and sides, mahogany neck, ebony fretboard, rosewood bridge, wood bindings, w-b-w top purfling, rosewood veneer on front of headstock, gold decal reading "Faust" on headstock back, gold tuners with pearloid buttons, intricate and colorful soundhole rosette, passive bridge transducer installed, very fine instrument, made in Japan, on consignment, with OHSC (gold lining) (SN:86041250)
28U-2176
$1,200.00
|
CORDOBA FCWE (1998)
14 Photos
EC-, acoustic-electric, predecessor to Gipsy Kings signature model lacking only the signature label and mic upgrade, thinline (2-1/2" depth) cutaway body, solid fan-braced German spruce top, solid yellow cedar back and sides, Honduran cedar neck, ebony fretboard, 1-15/16" nut width, 650mm scale, rosewood bridge, rosewood-bound body, w-b-w-b top purfling, w-b back and side purfling, elaborate inlaid rosette, dual clear pickguards, factory Fishman Pro pickup / preamp system, made in Spain, on consignment, with OHSC (black lining) (SN:3272)
28U-2214
$1,200.00
|
RYOJI MASUOKA M150 (1983)
16 Photos
EC- except a small top crack along treble fretboard extension (doesn't go all the way through top and is under the finish), gloss natural finish, all solid woods, spruce top, Brazilian rosewood back and sides, 12-fret ebony reinforced mahogany neck with slotted headstock, 19-fret ebony fingerboard, 2-1/16" (52mm) nut width, 14-5/8" lower bout, 3-1/2" to 3-3/4" body depth, 660mm scale length, rosewood bridge, fancy rosette, rosewood-bound body, rosewood headstock overlay, open-gear gold tuners with pearloid buttons, made in Japan by this noted maker, with black semi-HSC (blue lining) (SN:830405)
28U-2173
$1,350.00
|
PHOENIX GUITAR CO. NYLON OM MODEL (2005)
14 Photos
EC, OM-size guitar with nylon strings, 14-3/8" lower bout (closer to 00 width), 2-13/16" to 3-1/2" body depth, western red cedar top, solid cocobolo back and sides, 14-fret mahogany neck with Brazilian rosewood fingerboard, abalone vine inlay pattern on fingerboard connects to peghead "Phoenix" inlay, 21 frets, slotted headstock with Brazilian rosewood overlay, wood binding on body and fingerboard, abalone top purfling and rosette, engraved gold tuners with ebony buttons, Brazilian rosewood pyramid-style bridge with straight bone saddle, designed as a "jazz / fingerstyle" rather than classical-style guitar, warm and responsive sound, 1-13/16" bone nut, 26" scale, on consignment, hand-made in USA, with Cedar Creek OHSC (gold lining) (SN:4505)
28U-2278
$2,000.00
|
TAYLOR NS74-CE (2007)
14 Photos
EC+, acoustic-electric, rounded cutaway, gloss natural finish, cedar top, rosewood back and sides, 14-fret mahogany neck with slotted headstock, 20-fret ebony fingerboard, 1-7/8" nut width, 650mm scale, ebony bridge, rosewood-bound body, fancy etched rosette, gold tuners with ivoroid buttons, factory Fishman Prefix ProBlend pickup / mic / preamp system, on consignment, with OHSC (SN:20071212703)
28U-2287
$2,000.00
|
BREEDLOVE SN25 BOSSA NOVA (recent)
14 Photos
EC, classic-electric, cutaway, grand concert body shape with 3-3/8" to 4-3/8" body depth, all solid woods, Indian rosewood back and sides, red cedar top, factory Fishman Prefix ProBlend mic / pickup system, 14-fret mahogany neck with slotted headstock, ebony fingerboard with offset pearl dot inlays, "B" inlay in first fret, 15-1/4" lower bout, 650mm scale, 1-7/8" nut width, abalone soundhole rosette, clear pickguard, black-bound body and fretboard, w-b-w-b top purfling, nickel tuning machines with pearloid buttons, ebony peghead overlay, handcrafted in the U.S.A., with OHSC (black lining), on consignment (SN:6237)
28U-2281
$2,250.00
|
RICHARD SCHNEIDER KASHA MODEL (1969)
13 Photos
VG-EC, redwood top, Indian rosewood back and sides, mahogany neck, 19-fret ebony fingerboard, Kasha bridge, 14-1/2" lower bout, 672mm scale, 2-3/16" (55mm) nut width, 3-5/8" to 3-7/8" body depth, nut appears replaced, rosewood headstock overlay, engraved gold tuners with fancy pearloid buttons, wood body bindings and purflings, L.R. Baggs active I-beam pickup installed, inside label signed by Richard, nice guitar from this noted maker (made in his pre-Gibson days) with thermoplastic HSC (black lining), price reduced (SN:XSK-5-51)
28U-2139
$4,000.00
|
JOSE RAMIREZ SP MODEL (2004)
17 Photos
EC, Semi-Professional Model, German spruce top, Indian rosewood back and sides, cedar neck, 19-fret ebony fingerboard (side pearl dots have been added), rosewood bridge, rosewood peghead overlay, gold tuners with oval ivoroid-looking buttons, attractive rosette, 14-5/8" lower bout, 650mm scale, 52mm nut width, 3-5/8" to 4" body depth, built in Spain, with OHSC (green lining), on consignment (SN:04-075)
28U-2246
$4,100.00
|
Classical Guitars
 other vintage and used categories . . .
|
|
|
|
| 
