EC+, 000-size, gloss natural finish, spruce top with scalloped bracing, rosewood back and sides, 14-fret mahogany neck (modified V-shape), ivoroid-bound 20-fret ebony fingerboard with 45-style daimond and snowflake inlays, 1-3/4" nut width, 25.4" scale, ebony bridge with long saddle, small tortoise plastic pickguard, ivoroid-bound body and headstock, abalone rosette and top trim, abalone "CF MARTIN" vertical logo, gold tuners with butterbean buttons, on consignment, with Geib-style OHSC (SN:1054192)
10U-5262
$2,750.00
MARTIN D-35JC JOHNNY CASH (2007)
12 Photos
EC-, Commemorative Edition, #627, D-size, gloss black finish (1-3/4" finish crack on center seam below bridge, top is solid), Engelmann spruce top, scalloped bracing, forward X-brace, 3-piece Indian rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with abalone-in-pearl star inlays, Johnny's signature inlaid at 20th fret, 1-23/32" nut width, 25.4" scale length, ebony bridge, abalone soundhole rosette, black pickguard, ivoroid-bound body, fingerboard and headstock, chrome Grover Rotomatic tuners, label signed by John Carter Cash and C.F. Martin IV, with OHSC (black lining and hardware) (SN:1243256)
10U-5245
$2,985.00
|
MARTIN 000-28VS (2007)
13 Photos
EC+, Vintage Series, 15-1/8" lower bout, spruce top with aging toner and scalloped bracing, rosewood back and sides, 12-fret mahogany neck with slotted headstock, 20-fret ebony fingerboard with slotted diamond inlays, 1-13/16" nut width, 25.4" scale, ebony pyramid bridge with long saddle, replacement ebony bridge pins, ivoroid-bound body, herringbone top trim, nickel Waverly tuners with butterbean buttons, fossilized walrus ivory endpin with pearl dot, with Geib-style OHSC (cabernet lining) (SN:1264614)
10U-5279
$2,650.00
|
MARTIN D-28 (1997)
14 Photos
EC-, D-size, spruce top, Indian rosewood sides and back, 14-fret mahogany neck, 20-fret ebony fingerboard with pearl dot inlays, ebony bridge, rosewood peghead overlay, 1-11/16" nut width, 25.4" scale, 15-1/2" lower bout, 3-7/8" to 4-7/8" body depth, black pickguard, chrome sealed gear tuners, white-bound body, b-w-b-w-b top purfling, b-w back purfling, L.R. Baggs M1 soundhole pickup installed with endpin jack, with black thermoplastic OHSC (green lining) (SN:619471)
10U-5240
$1,550.00
|
MARTIN D-28 (1976)
14 Photos
VG-EC, D-size, 15-3/4" lower bout, gloss natural finish, spruce top, Indian rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard (refretted at some point in past), pearl dot inlays, 1-11/16" nut width, 25.4" scale, ebony bridge was moved at some point to correct intonation (witness line is visible in font of bridge), rosewood bridge plate, black plastic pickguard (cleated and repaired pickguard crack), white bound body with b-w-b-w-b top purfling, chrome Grover Rotomatic tuners, replacement bone nut, very good sound, with blue thermoplastic OHSC (blue lining) (SN:378844)
10U-5265
$1,950.00
|
MARTIN HD-28 (1996)
14 Photos
EC-, D-size body, 15-5/8" lower bout, spruce top, scalloped braces, herringbone top trim, rosewood back and sides, 14-fret mahogany neck, ebony fretboard, dot inlays, 20 frets, ebony bridge, tortoise plastic pickguard, white-bound top and back, zipper back strip, chrome tuners, L.R. Baggs Element pickup installed, 1-11/16" nut, 25.4" scale, with Martin/Geib OHSC (green lining) (SN:573865)
10U-5260
on hold...$1,750.00
|
MARTIN D-28 (1978)
14 Photos
VG-EC except needs some work (reset neck, dress frets, repair damaged bridge plate, setup, etc. - sold AS-IS), D size body, spruce top, rosewood back and sides, 14-fret mahogany neck, ebony fretboard (finger tip wear has been epoxy filled in frets 1 through 7), dot inlays, 20 frets, ebony bridge, black plastic pickguard, gold Grover Rotomatic tuners installed, bridge pickup has been removed but endpin jack remains, 1-11/16" nut, 25.4" scale, with Martin thermoplastic OHSC (brown lining) (SN:401678)
10U-4905
$1,600.00
|
MARTIN 000-21 (1938)
16 Photos
EC except top, all top bracing, binding and maple bridge plate have been replaced, 15-1/4" lower bout, spruce top, Brazilian rosewood back and sides, several repaired side cracks and patched jack hole in lower treble side, 14-fret mahogany neck has been refretted at some point, 20-fret ebony fingerboard, slotted diamond inlays, new ~1-3/4" nut (by our shop), 24.9" scale, replacement ebony bridge (by our shop), replacement tortoise plastic pickguard, tortoise plastic body binding, herringbone rosette and backstrip, Brazilian rosewood headstock overlay with 3 repaired holes in center and replacement logo decal (decal has been finished over), replacement 1950's Kluson ridge back tuners with oval metal buttons, most recent neck reset by our shop (fingerboard extension was cut through at 14th fret either during previous neck reset or when top was replaced), entire instrument professionally refinished (awhile ago), top binding and purfling are not as even and precise in fit due to top replacement, good sound, with newer semi-hard case (ivory plush lining) (SN:71055)
10U-5221
$7,500.00
|
MARTIN 000-40Q2GN GRAHAM NASH (2003)
15 Photos
EC+, Limited Edition, #93 of 147 made, 000 size, quilted mahogany top, back and sides, 14-fret mahogany neck, tortoise plastic-bound 20-fret ebony fingerboard with abalone 42-style inlays, "Graham Nash" signature at frets 18-20, 1-23/32" nut width, 24.9" scale length, ebony bridge with abalone snowflake inlays, abalone rosette, tortoise plastic pickguard, tortoise plastic bound body and headstock, herringbone top trim, ebony headstock overlay with pearl Martin logo and Nash's winged heart symbol, gold Waverly tuners with butterbean buttons, interior label signed by Graham Nash and C.F. Martin IV, on consignment, with OHSC (green lining) (SN:951775)
10U-5249
$3,200.00
|
MARTIN OM-28V CUSTOM (1998)
14 Photos
EC, custom ordered Vintage Series OM-28, double bound 15-1/4" body, soft cutaway, spruce top with aging toner, herringbone top trim, forward shifted X pattern scalloped braces, rosewood back and sides, 14-fret mahogany neck, ebony fretboard, slotted diamond inlays, 20 frets, ebony bridge with long saddle, small tortoise plastic pickguard, Martin tuners with butterbean buttons, squared headstock, old-style decal (with black border), cool guitar, 1-3/4" nut, 25.4" scale, with Geib style OHSC (green lining) (SN:667029)
10U-5235
$2,800.00
|
MARTIN OM-28V (2006)
14 Photos
EC+, Vintage Series, 000-size, gloss natural finish, spruce top with aging toner and scalloped bracing, rosewood back and sides, 14-fret v-shaped mahogany neck, 20-fret ebony fingerboard, slotted diamond inlays, 1-3/4" nut width, 25.4" scale, ebony bridge with long saddle, small tortoise plastic pickguard, ivoroid-bound body with herringbone top trim, nickel tuners with butterbean buttons, on consignment, with Geib-style OHSC (SN:1188724)
10U-5236
$2,150.00
|
MARTIN CEO-5 CEO'S CHOICE (2002)
14 Photos
EC-, #193 of Special Edition, 12-fret D-size body, 15-5/8" lower bout, bearclaw spruce top, scalloped bracing, sapele back and sides, slotted headstock with rosewood overlay, 20-fret striped ebony fretboard with abalone dot inlays, 1-3/4" nut width, 25.4" scale, striped ebony bridge, ivoroid-bound body, herringbone top trim, b-w-b top purfling, tortoise plastic pickguard, gold tuners with white pearloid buttons, pearl herringbone soundhole rosette, gloss body finish, satin finished neck, Fishman Rare Earth Blend pickup / mic system installed, interior label signed by C.F. Martin IV, on consignment, with flat-lid wooden OHSC (green lining) (SN:874577)
10U-5232
$1,895.00
|
MARTIN D-18 (2004)
14 Photos
EC, gloss natural finish, double bound D body, spruce top, mahogany back and sides, 14-fret mahogany neck, rosewood fretboard, dot inlays, 20 frets, rosewood bridge, black plastic pickguard, Martin / Schaller tuners, good sound, 1-11/16" nut, 25.4" scale, with black thermoplastic OHSC (SN:1039110)
10U-5229
$1,350.00
|
MARTIN HD-35 (1997)
14 Photos
VG-EC, D-size, gloss natural finish, spruce top with scalloped bracing and herringbone top purfling, rosewood sides and 3-piece back, 14-fret mahogany neck, 20-fret ebony fingerboard with pearl dot inlays, 1-11/16" nut width, 25.4" scale, 15-5/8" lower bout, 3-7/8" to 4-7/8" body depth, ebony bridge, tortoise plastic pickguard, white-bound body and fretboard, zipper back strips, rosewood headstock overlay, chrome tuners, one large filled and repaired top ding, several smaller nicks especially on headstock edge, back braces and bridge have been reglued by our shop, with black thermoplastic OHSC (green lining) (SN:624036)
10U-4969
$1,800.00
|
MARTIN OMC-18LJ LAURENCE JUBER (2008)
13 Photos
EC+, cutaway 000-size body, 15-1/8" lower bout, adirondack spruce top with scalloped 1/4" braces, modified V-shape mahogany neck with carved diamond volute, ebony fretboard with old Style 18 pearl dots at frets 5, 7 & 9, tortoise plastic body binding with w-b-w-b top purfling, 28-style 3-ring rosette, no pick guard, ebony bridge with 2-1/4" string spacing and ebony bridge pins, madagascar rosewood peghead overlay with old style decal, nickel Martin butterbean tuning gears, bone nut and saddle, 25.4" scale, 1-3/4 nut width, inside label is signed by Laurence Juber, K&K Pure Western pickup installed, on consignment, Martin-Geib style OHSC (cabernet lining) (SN:1334911)
10U-5253
$2,850.00
|
MARTIN D-28 (2002)
11 Photos
VG-EC except one repaired side crack (treble side below waist), gloss natural finish, spruce top, rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard, pearl dot inlays, 1-11/16" nut width, 25.4" scale, ebony bridge, black pickguard, white-bound body, nickel tuners, with thermoplastic OHSC (SN:857527)
10U-5046
$1,400.00
|
MARTIN OMC AURA (2008)
15 Photos
EC, acoustic /electric, double bound 000 body, rounded cutaway, spruce top, abalone rosette and top trim, rosewood back and sides, 14-fret mahogany neck, bound ebony fretboard, abalone hexagon outline inlays, 20 frets, ebony bridge with abalone hex outline inlays, small black pickguard, bound headstock, ebony headstock overlay with pearl logo inlay, gold tuners with ebony buttons, factory Fishman pickup and Aura preamp / acoustic imaging system, 1-3/4" nut, 25.4" scale, with thermoplastic OHSC (SN:1332943)
10U-5242
$2,100.00
|
MARTIN HDN NEGATIVE (2003)
13 Photos
EC+, Limited Edition, #78 of 135, D-size, gloss black finish, Engelmann spruce top, Indian rosewood back and sides, satin black-finished 14-fret mahogany neck, black-bound 20-fret white micarta fingerboard, 45-style abalone inlays, 1-3/4" nut width, 25.4" scale, white micarta bridge, white pickguard and headstock overlay (abalone alternate torch inlay in headstock), black-bound body with herringbone top trim and abalone rosette, chrome tuners with ebony buttons, interior label signed by C.F. Martin IV and Dick Boak, very sharp looking guitar, on consignment, includes Geib-style OHSC (green lining) (SN:927300)
10U-5227
$2,750.00
|
MARTIN D-16GT (2000)
14 Photos
EC- except needs some work (glue and cleat top crack below bridge, dress frets, setup, etc. - sold AS-IS), 15-5/8" lower bout, gloss finished solid spruce top, all solid woods, satin finished mahogany back and sides, 14-fret mahogany neck, 20-fret striped ebony fingerboard with pearl dot inlays, herringbone soundhole trim, striped ebony bridge , scalloped bracing, black body binding, tortoise plastic pickguard, chrome tuners, 1-11/16" nut width, 25.4" scale, with flat-lid HSC (green lining) (SN:769251)
10U-5233
$625.00
|
MARTIN J-40M (1988)
15 Photos
EC, double bound 16" body, spruce top, rosewood back and sides, 14-fret mahogany neck, bound ebony fretboard, hexagon inlays, 20 frets, ebony bridge, compensated saddle, rosewood headstock overlay, gold Martin / Schaller tuners, black pickguard, Fishman under saddle pickup installed, smooth sound, 1-11/16" nut, 25.4" scale, with OHSC, on consignment (SN:483287)
10U-5238
$2,100.00
|
MARTIN OMC-28E (2006)
15 Photos
EC, acoustic-electric, rounded cutaway, gloss natural finish (slight staining at fingerboard extension), spruce top, rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with pearl dot inlays, 1-3/4" nut width, 25.4" scale length, rosewood peghead overlay, chrome tuners, white-bound body, ebony bridge, black plastic pickguard, with factory Fishman Ellipse Aura pickup, with thermoplastic OHSC (green lining) (SN:1156877)
10U-5234
$2,100.00
|
MARTIN 0-17 (1934)
14 Photos
VG-EC except needs work (possible refret to straighten slight neck warp, make repro bridge - this one has been lowered in height, reset neck, strings, setup, etc. - sold AS-IS), 13-5/8" lower bout, all mahogany body, scalloped bracing, 14-fret mahogany neck, 20-fret Brazilian rosewood fingerboard with micro-dot inlays, tortoise plastic pickguard, 24.9" scale, 1-3/4" nut width, replacement Martin tuners with butterbean buttons, Brazilian rosewood peghead overlay, with SSC (very worn and duct-taped together, a worthy project! (SN:56054)
10U-5104
$2,450.00
|
MARTIN BACKPACKER (recent)
10 Photos
VGC+ but needs minor work (dress frets, heat press minor warp out of neck, strings, setup, etc. - sold AS-IS), small body (~7-7/8" body width) travel guitar with solid spruce top, solid mahogany sides and back, 15-fret rosewood fingerboard, dot markers, rosewood bridge, chrome tuners, natural satin finish, 1-11/16" nut width, 24-1/8" scale, built in Mexico, with gigbag (SN:34701)
10U-5223
$95.00
|
MARTIN D-21 (1967)
14 Photos
VG-EC, D-size, 15-3/4" lower bout, spruce top, Brazilian rosewood back and sides, 14-fret mahogany neck, 20-fret Brazilian rosewood fingerboard with pearl dot inlays, 1-11/16" nut width, 25.4" scale length, Brazilian rosewood bridge (new correct size maple bridge plate), original black plastic pickguard has been reglued (shrunk just a bit), black body binding, Brazilian rosewood peghead overlay, chrome Grover Rotomatic "PAT. PEND. U.S.A." tuners, fine sound, neck has been reset by our shop, one repaired back crack and some finish checking, overall very clean, on consignment, with rough OHSC (burgundy lining) (SN:225384)
10U-5189
$5,200.00
|
MARTIN 00-18 (1947)
25 Photos
VG-EC with one small repaired top crack by pickguard edge, spruce top, mahogany back and sides (small jack hole patched on lower treble side), 14-fret mahogany neck, 20 fret Brazilian rosewood fingerboard with pearl dot inlays, this guitar was once set up for left-handed use, our shop has returned it to right handed again with (new bone nut, they installed a period correct pickguard, plugged and reslotted bridge, plugged strap button hole), replacement Brazilian rosewood bridge with short saddle, Brazilian rosewood peghead overlay, tortoise plastic body binding, w-b-w-b top purfling, individual open-gear tuners with oval plastic buttons, 14-3/8" lower bout, 24.9" scale, 1-11/16" nut width, 3-1/4" to 4" body depth, this guitar has had a neck reset and bridge plate patch at some point, nice sounding and playing guitar, with rough OHSC (purple lining), on consignment (SN:98323)
10U-5193
$3,200.00
|
MARTIN 000-28VS (2006)
13 Photos
EC+, Vintage Series, 15-1/8" lower bout, spruce top with aging toner and scalloped bracing, rosewood back and sides, 12-fret mahogany neck with slotted headstock, 20-fret ebony fingerboard with slotted diamond inlays, 1-13/16" nut width, 25.4" scale, ebony pyramid bridge with long saddle, replacement ebony bridge pins, ivoroid-bound body, herringbone top trim, nickel Waverly tuners with butterbean buttons, on consignment, with Geib-style OHSC (cabernet lining) (SN:1178755)
10U-5218
$2,650.00
|
MARTIN 000-18GE GOLDEN ERA (2007)
14 Photos
EC-, gloss natural finish, aging toner on top, Adirondack spruce top with scalloped bracing, mahogany back and sides, 14-fret modified V-shape mahogany neck, 20-fret ebony fingerboard with abalone dot inlays, tortoise plastic pickguard and body binding, w-b-w-b top purfling, ebony bridge with long saddle, Brazilian rosewood peghead overlay with Golden Era style Martin decal logo, Martin vintage-style tuners stamped "W.PAT.P.", short 24.9" scale, 1-3/4" nut width, 15-1/8" lower bout, 3-1/8" to 4" body depth, C.F. Martin IV's signature on label, neck block stamped "GOLDEN ERA / 00018GE 1937", I-beam active pickup installed with volume control on edge of soundhole, with Geib-style OHSC (cabernet lining) (SN:1197931)
10U-5212
$2,400.00
|
MARTIN 00-18H (1941)
19 Photos
VG-EC, this is the actual guitar, owned by Geoff Muldaur and featured in the spring 2009 edition of "The Fretboard Journal", that was the inspiration for his return to active duty in music and the template for the Martin "GEOFF MULDAUR / 00-18H ARTIST EDITION," sunburst Adirondack spruce top with scalloped braces, mahogany back and sides, 12 fret mahogany neck with Brazilian rosewood fingerboard, 20 frets, pearl dot inlays, tortoise plastic binding with b-i-b-i-b top purfling, old 18-style rosette, original tortoise plastic pickguard, slotted peghead with Brazilian rosewood overlay and original decal, replacement Waverly/Sloane 3-on-plate tuners with engraved bronze base-plate and ivoroid buttons, 24.9" scale, newer 1-7/8" bone nut, rosewood (not Brazilian) replacement bridge with bone through saddle, there are two repaired side cracks. Originally a Hawaiian guitar, like so many of these it has been converted to Spanish style and the neck has been reset, reshaped and refretted as part of the process of the change from Hawaiian-style playing, there is an ebony bridge cap, some playwear around the soundhole and on the edges but the finish is original, and lest we forget, the guitar sounds and plays great!!! Also included are a letter from Geoff Muldaur to Stan Werbin, our owner and president concerning the guitar, and a signed glossy copy of the photo from "The Fretboard Journal," a copy of the spring 2009 issue of TFJ and the new Texas Sheiks CD on which Geoff plays the guitar, a Highlander pickup included but not installed (pickup works with stereo chord to Highlander remote power box, not included), on consignment, with newer Martin / Geib-style HSC (green lining) (SN:77702)
10U-5194
$10,000.00
|
MARTIN M-28 CUSTOM (2006)
14 Photos
EC, 0000-size, gloss natural finish, Adirondack spruce top scalloped bracing, Indian rosewood back and sides, V-shaped, 14-fret mahogany neck, 20-fret ebony fingerboard with abalone dot inlays, ebony bridge with long saddle, ivoroid-bound body, herringbone top purfling, black pickguard, 16" lower bout, 25.4" scale, 1-3/4" nut width, 3-1/8" to 4" body depth, rosewood peghead overlay, Waverly tuners with butterbean buttons, K&K transducer pickup installed, very nice guitar! With Geib-style OHSC (Cabernet lining), on consignment (SN:1142625)
10U-5190
$2,800.00
|
MARTIN DCM (1997)
14 Photos
EC, D-size, 15-5/8" lower bout, rounded cutaway, solid spruce top, mahogany back, sides and neck, rosewood peghead overlay, 20 fret rosewood fretboard with dot inlays, rosewood bridge, tortoise plastic pickguard, black body binding, herringbone soundhole rosette, chrome sealed gear tuners, natural satin finish, 1-11/16" nut width, ~25-3/8" scale, with flat top wooden OHSC (green lining) (SN:618603)
10U-5186
$725.00
|
MARTIN D-45 (1999)
15 Photos
EC except for one repaired back crack on bass side lower bout, 15-5/8" lower bout, gloss natural finish, spruce top with scalloped bracing, rosewood back and sides, 14-fret mahogany neck, white-bound 20-fret ebony fingerboard, abalone hexagon inlays, 1-11/16" nut width, 25.4" scale, ebony bridge, tortoise plastic pickguard, abalone rosette, white-bound body, abalone trim on top, back, sides, heel and fingerboard extension, gold sealed gear tuners with Martin logo on back, classic deluxe appearance and sound from the good people in Nazareth, with Martin thermoplastic OHSC (green lining) (SN:684111)
10U-5180
$5,000.00
|
MARTIN D-18 (1970)
14 Photos
VG-EC except for one repaired pickguard crack, D-size, gloss natural finish, all solid woods, spruce top, mahogany back, sides and 14-fret neck, 20-fret Brazilian rosewood fingerboard, pearl dot inlays, 1-11/16" nut width, 25.4" scale, 15-5/8" lower bout, 3-7/8" to 4-7/8" body depth, Brazilian rosewood bridge, black pickguard and body binding, chrome Grover Rotomatic tuners stamped "PAT. PEND. / U.S.A.", extra strap button plugged on end of heel, nice sounding and playing guitar, with blue-gray thermoplastic OHSC (rust colored lining), on consignment (SN:259380)
10U-5172
$2,200.00
|
MARTIN 000-28 (1967)
14 Photos
EC-, natural finish on spruce top, nicely figured Brazilian rosewood sides and back, 14-fret mahogany neck, 20-fret ebony fretboard with pearl dot inlays, ebony bridge with compensated bone saddle, bone bridge pins with tortoise dot inlay, Brazilian rosewood peghead overlay, Grover Rotomatic tuners with "PAT. PEND. U.S.A." on back, tortoise plastic pickguard, white-bound body, b-w-b-w-b top purfling, b-w back purfling, no cracks, one ding on lower bass bout near edge of top, very good sound, neck was reset by our shop, 15" lower bout, 24.9" scale, 1-11/16" nut width, 3-1/4" to 4-1/16" body depth, with very good condition wooden OHSC (green lining) (SN:219182)
10U-5131
$9,000.00
|
MARTIN DM (1999)
14 Photos
EC except could use some minor work (slightly sunken top, dress frets, strings, setup, etc. - sold AS-IS), D-size, 15-5/8" lower bout, natural satin finish, solid spruce top, mahogany back and sides, 14 fret mahogany neck, 20 fret rosewood fingerboard with pearl dot inlays, 1-11/16" nut width, 25.4" scale, rosewood bridge, tortoise plastic pickguard, herringbone soundhole rosette, black body binding, chrome tuners, with flat-lid OHSC (green lining) (SN:719592)
10U-5118
$525.00
|
MARTIN D-18 (1947)
27 Photos
VGC+, here's a great player's D-18 that was just given an excellent refurb by our shop (they did a neck reset, refret, reglued bridge, repaired several cracks), spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret Brazilian rosewood fretboard with pearl dot inlays, Brazilian rosewood bridge, Brazilian rosewood peghead overlay, individual open-gear tuners with oval metal buttons, tortoise-plastic pickguard and body binding, ivoroid-black-i-b top purfling, 15-5/8" lower bout, 25.4" scale, 3-7/8" to 4-7/8" body depth, 1-11/16" nut width, excellent playability and sound, with very rough SSC (no handle), on consignment (SN:101169)
10U-5128
$4,500.00
|
MARTIN 000-45 (1935)
23 Photos
VG-EC with with some repaired top and back cracks, 15-1/8" lower bout, 24-7/8" scale, 1-3/4" nut width, Brazilian rosewood sides and back, abalone trim on all body borders and around soundhole, tortoise plastic pickguard, block "C.F. MARTIN" inlay in ivoroid-b-w-bound headstock, gold-plated open back tuners with butterbean buttons and stamped "GROVER", ivoroid-bound ebony fretboard with colorful pearl snowflake inlays, ebony belly bridge, much work done in the past: In 1979 the C.F. Martin company refinished it after repairing the top and back cracks, installing a new bridge, rosewood bridge plate and tuners. In 2009, Joe Konkoly in our shop replaced the bridge plate with an original size maple plate, reset the neck and dressed the frets, putting the guitar back into a more original state as well as optimizing its playability. Now as well with its well-aged finish and return to original specs this very fine sounding guitar will undoubtedly make some player/collector extremely happy! Includes late '70's Martin black thermoplastic HSC, on consignment . (SN:60805)
10U-5165
$67,500.00
|
MARTIN D-28 (1967)
15 Photos
EC-, 15-3/4" lower bout, gloss natural finish, spruce top has been refinished at some point, repaired pickguard crack, very straight-grained Brazilian rosewood back and sides (repaired minor crack in treble side waist), 14-fret mahogany neck, 20-fret ebony fingerboard, pearl dot inlays, 1-11/16" nut width, 25.4" scale, replacement ebony bridge and maple bridge-plate, new bone saddle and nut by our shop, soundhole is enlarged slightly, 3-ring rosette, black plastic pickguard (3-small holes left by removed nameplate), white-bound body with b-w-b-w-b top purfling, b-w back purfling, Brazilian rosewood headstock overlay, chrome Grover Rotomatic tuners read "PAT. PEND. U.S.A.", neck has been reset and refretted, fingerboard has been tapered a bit from 5th fret to nut, marks on the guitar back (not visible in photos) from lying on a vinyl guitar strap and some belt buckle scratching, good sound and fine vintage looks, with newer Martin thermoplastic HSC (green lining) (SN:227667)
10U-5091
$5,250.00
|
MARTIN D-18 (1971)
14 Photos
VG-EC, gloss natural finish, spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard, dot inlays, 1-11/16" nut width, 25.4" scale, 15-5/8" lower bout, 3-7/8" to 4-7/8" body depth, replacement rosewood bridge, bone saddle, and black plastic pickguard, black body binding, rosewood peghead overlay, chrome Grover Rotomatic tuners stamped "PAT.PEND. / U.S.A.", guitar has had a neck reset at some point, small rosewood bridge plate patch installed, strap button installed next to heel (solid), thermoplastic OHSC (blue lining) (SN:272275)
10U-5113
$2,200.00
|
MARTIN OMC-28LJ LAURENCE JUBER SIGNATURE MODEL (2004)
15 Photos
EC-, Limited Edition (#41 of 133), 000-size, rounded cutaway, gloss natural finish, Adirondack spruce top with scalloped Adirondack spruce bracing, Indian rosewood back and sides, 14-fret mahogany V-neck, 20-fret ebony fingerboard without inlays, 1-3/4" nut width, 25.4" scale, ebony bridge, ivoroid-bound body with herringbone top trim, small teardrop Greven beveled edge "Tor-Tis" pickguard installed, nickel Waverly tuners, interior label signed by C.F. Martin IV and Laurence Juber, K & K pickup and endpin jack installed, great sound, 2 dings in instrument top near pickguard and repaired back crack (glued and cleated) near end block Geib-style OHSC (green lining) (SN:992949)
10U-5120
$2,950.00
|
MARTIN 000-42SB (2004)
14 Photos
EC-, 1935 Style sunburst finish, 15-1/8" lower bout, spruce top, scalloped bracing, Indian rosewood back and sides, 14-fret V-shaped mahogany neck, ebony fingerboard with slotted diamond, square, catseye and snowflake inlays, 1-25/32" nut width, 24.9" scale, ebony bridge, tortoise plastic pickguard, ivoroid-bound body, fretboard and headstock, abalone top purfling extends around fingerboard extension and soundhole rosette, rosewood peghead overlay with abalone block "C.F. MARTIN" logo, gold vintage style Martin tuners with butterbean buttons, with Geib-style OHSC (green lining) (SN:1036092)
10U-5115
$3,500.00
|
MARTIN DITSON 111 (2007)
14 Photos
EC+, Special Edition based on the first dreadnought guitar designed by Martin for the Oliver Ditson Company in 1916, 15-3/4" lower bout, Adirondack spruce top with aging toner and scalloped braces, mahogany back and sides, modified V-shaped 12-fret mahogany neck with slotted headstock, 19-fret ebony fingerboard with abalone dot inlays, 1-7/8" nut width, 25.4" scale length, ebony pyramid bridge, tortoise plastic pickguard, single ring multi-layered rosette, Brazilian rosewood body binding, fossil ivory nut and saddle, engraved Waverly Sloane tuners with ivoroid buttons, Brazilian rosewood headstock overlay, interior label signed by C.F. Martin, fine sound, with textured OHSC (dark green lining) (SN:1215329)
10U-5099
$3,600.00
|
MARTIN D-28 (1966)
14 Photos
VG-EC except for three repaired top cracks, gloss natural finish, spruce top, very nice looking Brazilian rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with pearl dot inlays, replacement ebony bridge and maple bridge plate, tortoise plastic pickguard, white-bound body, b-w back purfling, b-w-b-w-b top purfling, 15-3/4" lower bout, 25.4" scale, 1-11/16" nut width, 3-7/8" to 4-7/8" body depth, Brazilian rosewood peghead overlay, chrome Grover Rotomatic tuners stamped "PAT.PEND / U.S.A.", replacement bridge pins, recent neck reset, X-braces were reglued at some point, neck heel was cracked and repaired, with OHSC (blue lining) (SN:213003)
10U-5077
$5,200.00
|
MARTIN D-18 (1943)
14 Photos
VGC+ except has seen much work over the years (completely refinished - pretty good job, missing logo, several repaired top, back and side cracks, replacement pickguard, new bone nut, replacement Grover Rotomatic tuners and bridge pins), spruce top with scalloped bracing, mahogany back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with pearl dot inlays, 1-11/16" nut width, 25.4" scale, 15-3/4" lower bout, 4" to 4-7/8" body depth, recent neck reset and repro bridge by our shop, great player's instrument, with rough 70's Martin HSC (blue thermoplastic with blue lining), on consignment (SN:83698)
10U-4960
$8,000.00
|
MARTIN 00-28 (1921)
13 Photos
VG-EC, 14-1/8" lower bout, spruce top (lower bout treble side has a ~2"x6" piece that has been replaced), Brazilian rosewood back and sides, double ivoroid-bound body with herringbone top purfling, back binding and purfling have been replaced, 12-fret mahogany neck with slotted headstock, 20-fret ebony fingerboard with slotted diamond inlays, 1-7/8" nut width, 24.9" scale length, Brazilian rosewood headstock overlay, period replacement 3-on-a-plate open gear tuners with ivoroid buttons, reproduction ebony pyramid bridge (bridge-plate has been replaced) a fine players guitar that has had quite a bit of work done, recent neck reset, ~1" piece of the neck heel and the heel-cap have been replaced, the entire guitar is refinished (shellac on the back and sides, shellac over-sprayed with lacquer on the top), several top, side and back cracks have been glued and cleated, under the fingerboard extension there is an area of replaced spruce, a sweet toned and attractive player's instrument, signed by "C.F. Martin IV" on interior backstrip, with arched-lid HSC (blue lining), price reduced (SN:16635)
10U-4196
$4,950.00
|
MARTIN 000-18 (1943)
13 Photos
VGC+ except one repaired crack each on the top and back, and two on the sides. 000-size, 15-1/4" lower bout, spruce top with scalloped bracing, mahogany back and sides, 14-fret mahogany neck, 20-fret Brazilian rosewood fingerboard with pearl dot inlays, 1-11/16" nut width, 24.9" scale, Brazilian rosewood bridge, tortoise plastic pickguard and body binding, open back riveted Waverly tuners with ivoroid buttons (one tuner replaced with period similar one), Brazilian rosewood headstock overlay, recent neck reset and repro bridge by our shop. Very nice, mostly original guitar with a great sound, with 1930's era Martin HSC (black with green lining, some of covering missing, some loose seams and some missing wood on the bottom of the case) (SN:83661)
10U-4942
$11,500.00
|
MARTIN D-35 (1976)
15 Photos
VGC+ except for repaired crack at edge of lower treble bout, sunburst finish, D (15-3/4") body, spruce top, Indian rosewood sides and 3-piece back, 14-fret mahogany neck, white-bound 20-fret ebony fingerboard with pearl dot inlays, 1-11/16" nut width, 25.4" scale length, ebony bridge, replacement black plastic pickguard, white-bound body, chrome Grover "PAT. PEND. / U.S.A." tuners, good tone and nice figure in the spruce top, with flat-lid HSC (one broken latch, blue lining), price reduced (SN:375666)
10U-4906
$1,875.00
|
MARTIN D-28 (1966)
20 Photos
VG-EC except for one repaired back crack, this one has good volume and tone which is what you should expect from a vintage Martin flattop! Gloss natural finish, spruce top, nice looking Brazilian rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with pearl dot inlays, fossilized nut, ebony bridge, maple bridge plate, tortoise plastic pickguard, white-bound body, b-w back purfling, b-w-b-w-b top purfling, 15-3/4" lower bout, 25.4" scale, 1-11/16" nut width, 3-7/8" to 4-7/8" body depth, Brazilian rosewood peghead overlay, chrome Grover Rotomatic tuners stamped "PAT.PEND / U.S.A.", replacement bridge pins, recent neck reset and bone saddle by our shop, with 1990's Martin thermoplastic HSC (blue lining), on consignment (SN:208461)
10U-4909
$6,500.00
|
MARTIN D-28 (1944)
16 Photos
VGC, really nice quartersawn Brazilian rosewood sides and back, red spruce top with scalloped bracing, herringbone top purfling, ivoroid-bound body, slotted diamond inlays in 20-fret ebony fingerboard, replacement ebony bridge (slightly oversize), tortoise plastic pickguard worn through in one area (something clear is filling the area), recent Waverly open back tuners with ivoroid buttons (original Kluson tuners with white plastic buttons included - in the case), 1-5/8" nut width, 25.4" scale, 15-3/4" lower bout, 4" to 4-7/8" body depth, fine sounding pre-war D-28, recent neck reset, new frets, slightly oversize bone nut, minor repaired side crack and neck patched at nut area (we can't see these last two repairs), new end pin and bridge pins (old bridge pins in case), on consignment, finish is rough but pretty much all original - some touch up on top and neck, with 1960's Martin HSC (black exterior and green interior), price reduced (SN:87829)
10U-4920
$35,000.00
|
MARTIN D-18 (1969)
14 Photos
EC- except needs work (reset neck, refret to straighten neck, reglue pickguard, glue top crack, install new strap button, strings, setup. etc. - sold AS-IS), 15-3/4" lower bout, spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with pearl dot inlays, 1-11/16" nut width, 25.4" scale length, Brazilian rosewood bridge, black body binding, black plastic pickguard, Brazilian rosewood peghead overlay, chrome Grover Rotomatic tuners read "PAT.PEND. U.S.A.", Barcus-Berry 1/4" endpin jack installed (no pickup), with HSC (black lining), price reduced (SN:255541)
10U-4889
$1,900.00
|
MARTIN D-18 (1940)
12 Photos
VGC+ except has seen much work over the years (new top and treble side by Martin in the 1950's), 15-1/2" lower bout, '50's spruce top (not scalloped), mahogany back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with pearl dot inlays, 1-11/16" nut width, 25.4" scale, repro ebony bridge, tortoise plastic pickguard (made by our shop from the oversize '50's pickguard that Martin put on) and body binding, replacement fingerboard by our shop, nickel Grover open-gear tuners with butterbean buttons, recent neck reset by our shop, back, neck and original side refinished by Martin (we think, in the '50's), newer decal in headstock, very fine sound, great player's instrument, with '50's Martin HSC (black with plush green lining, much duct tape on the edges), price reduced (SN:74185)
10U-4405
$5,750.00
|
MARTIN D-42V (1985)
14 Photos
EC except 1 repaired side crack, only 12 of these "Vintage Series" tone machines were built, double bound D (15-5/8") size body, spruce top with aging toner, scalloped braces, abalone top trim and rosette, very nice Brazilian rosewood back and sides, 14-fret V-shaped mahogany neck, bound ebony fretboard, fancy star and diamond inlays, 20 frets, ebony bridge with inlays, bound headstock with rosewood overlay and C.F. Martin inlay, Martin / Schaller roto style tuners, tortoise plastic pickguard, label inside signed by C.F. Martin III and IV, big sound, 1-11/16" nut, 25.4" scale, with OHSC, on consignment, Price Reduced (SN:455453)
10U-4754
$7,850.00
|
MARTIN 000-18 (1944)
14 Photos
VG-EC, 000-size, 15-1/4" lower bout, spruce top with scalloped bracing, mahogany back and sides, 14-fret mahogany neck, 20-fret Brazilian rosewood fingerboard with pearl dot inlays, 1-11/16" nut width, 24.9" scale, Brazilian rosewood bridge (bridge plate patch added), tortoise plastic pickguard and body binding, replacement nickel Waverly tuners with ivoroid-buttons (original tuners included), Brazilian rosewood headstock overlay, neck has been reset, fingerboard has been refretted, essentially all original and crack free, this guitar has a great vibe along with fine sound, with period brown HSC (purple lining), price reduced (SN:88296)
10U-4679
$10,000.00
|
MARTIN 0-45S STEPHEN STILLS LIMITED EDITION GUITAR & CASE
14 Photos
NEW - Based on a vintage jewel from Stills' collection of Martins - Only 91 were made - 0-size body of Madagascar rosewood and Adirondack spruce, neck joins body at 12th fret.- Ivoroid binding, 45-style pearl inlay around all edges of the body, 45-style rosette, ebony pyramid bridge with long saddle, no pickguard. Bound slotted peghead with Martin block letter logo, modified V-shape neck, bound ebony fretboard (24.9" scale, 1 7/8" nut width), 45-style snowflake inlays and Stills' signature in pearl at 17th fret, Waverly-Sloane 3-on-plate tuning gears, fossil ivory nut, saddle and bridgepins, full gloss finish (including neck), vintage toner on top. Inside label signed by Stills & C. F. Martin IV and numbered in sequence with total. Martin Geib style case (#515).
045SSS
(List $15999.00) (Minimum Advertised Price $12999.00)
Call for information
1-877-374-8391 (toll-free in USA)
|
MARTIN D-18 (1942)
14 Photos
EC except a few well-hidden cracks (see below), 15-3/4" lower bout, Adirondack spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard, pearl dot inlays, 1-11/16" nut width, 25.4" scale, replacement ebony bridge. Back, sides and neck refinished (looks like Martin factory work - several repaired cracks on back and one on side are under the newer finish), tortoise plastic pickguard and body binding, nickel Grover tuners with butterbean buttons, recent neck reset by our shop, small part of inner edge of soundhole replaced (excellent - appears to be factory work), great, loud, balanced prewar sound, with later HSC (blue lining), price reduced (SN:80198)
10U-4560
$12,000.00
|
MARTIN DITSON 111 SPECIAL EDITION GUITAR & CASE
15 Photos
NEW - This reissue commemorates the very first dreadnought guitar, designed by Martin for the Oliver Ditson Company of New York in 1916. Like the originals, the peghead is slotted and the neck meets the body at the 12th fret. Pickguard and rosette are the vintage design. Mahogany back and sides, Adirondack spruce top with scalloped Golden Era style braces, Brazilian rosewood binding, backstrip & endpiece, multi-layered black/maple soundhole rosette, ebony pyramid bridge, tortoise pickguard. Modified V-shape neck, ebony fretboard (1-7/8" nut, 25.4" scale), abalone dot position inlays, slotted headstock with Brazilian rosewood veneer (no decal, inlay, or stamp), Waverly/Sloane 3-on-plate gears with ivoroid buttons. Fossil ivory nut & saddle, gloss finish including neck, aging toner on top. Inside label signed by C.F.Martin IV. 540V case has vintage style latches.
DITSON111
(List $6599.00) (Minimum Advertised Price $5299.00)
Call for information
1-877-374-8391 (toll-free in USA)
|
MARTIN PETER FRAMPTON "CAMEL" D-42 SIGNATURE LIMITED EDITION GUITAR & CASE
6 Photos
NEW - D-size body of Indian rosewood and Adirondack spruce, scalloped braces with forward-shifted X, ivoroid binding, 45-style abalone top outline & rosette, tortoise pickguard, ebony bridge, camel bone bridge pins with pearl dots. Low profile neck, bound ebony fretboard (25.4" scale, 1-11/16" nut), 42-style snowflake inlays, Frampton's signature at 19th fret, bound peghead with old-style decal and pearl camel inlay, gold Waverly tuning gears with ivoroid butterbean buttons. Vintage toner on top, Geib style case. Inside label signed by Frampton & C.F. Martin IV and individually numbered with edition total. Only 76 will be built. Frampton wrote most of the music for his early '70's album "Frampton's Camel" on a Martin and still loves the Martin sound.
D42PF
.. list $7799.00 ours
$3900.00
|
MARTIN OM-18GE GOLDEN ERA GUITAR & CASE
11 Photos
NEW - 000 size body, mahogany back & sides, Adirondack (red) spruce top with scalloped Adirondack braces and aging toner, ebony belly bridge, tortoise pickguard, Brazilian rosewood binding. V-shaped neck (1930 profile), 25.4" scale, 1-3/4" nut, 2-3/8" string spacing at bridge (extra-wide, vintage), ebony fretboard with abalone dots at frets 5, 7, & 9, Brazilian rosewood peghead overlay with no decal or inlay, Waverly V-2 nickel banjo tuners with ivoroid buttons, ebony nut, fossil ivory long saddle. Inside label signed by C. F. Martin IV. Geib style case.
OM18GE
(List $4899.00) (Minimum Advertised Price $3699.00)
Call for information
1-877-374-8391 (toll-free in USA)
|
Martin Guitars
 other vintage and used categories . . .
|
|
|
|
| 
