EC-, except needs some work (polish frets, remove silver star stickers from fretboard, setup, clean, etc. - sold AS-IS), transparent red finish, quilted maple top over alder body, maple neck with rosewood fretboard, pearl dot inlays, ~1-3/4" nut width, 34" scale, two Alvarez soap bar pickups, passive electronics, 2 volume and 1 tone controls, 5 chrome sealed back tuners, heavy chrome bridge, made in Korea, with gigbag (SN:E040900)
55U-4125
$295.00
CARVIN LB70 (recent)
13 Photos
VG-EC, except needs some work (remove stickers from body, level fret slots, setup, etc. sold AS-IS), finish has been sanded from back of neck (from nut to 18th fret), frets have been removed and slots have been filled with brown strips to make bass fretless, (fair amateur work, lots of chips), gloss green-burst finish, offset double cutaway body, one-piece maple neck-thru body construction, alder body wings, ebony fretboard with dot inlays, 2 Carvin J-style pickups, passive / active electronics (push / pull pot on master volume), blend control and 3-band EQ, black strings-thru-body bridge, Hipshot D-Tuner on "E" string, chrome hardware, 34" scale, 1-5/8" nut width, built in the U.S.A., with rectangular thermoplastic OHSC (black lining) (SN:56112)
55U-4123
$550.00
|
ELECTRA PHOENIX BASS (1980's)
13 Photos
EC except needs some work (polish frets, setup, etc, sold AS-IS), offset double cutaway solid body, black finish, bolt-on neck with rosewood fingerboard, 21 frets, pearl dot inlays, brass nut, 1-9/16" nut width, ~34" scale, 2 pickups, 3-way pickup selector, 1 volume and 2 tone controls, phase switch, black hardware, made in Asia, with OSSC (red lining) (SN:3020318)
55U-4155
$195.00
|
ESP LTD C-305 (recent)
12 Photos
EC, LTD Series, 5 string, gloss transparent red finish, quilted maple top, 5-piece maple / walnut neck-thru-body construction, alder body wings, 24-fret rosewood fingerboard with abalone dot inlays and pearloid block at 12th fret with model # engraved (C-305), 1-3/4" nut width, 35" scale, 2 EMG-HZ pickups, active electronics with volume, blend and 3-band EQ, satin gold hardware, with rectangular black thermoplastic OHSC (black lining) (SN:0210931)
55U-4121
$525.00
|
FENDER '70s JAZZ BASS REISSUE (2006)
13 Photos
EC+, natural finish ash body, bound maple neck, black block inlays and neck binding, 3-bolt neck plate with tilt adjustment, bullet truss rod adjuster, 2 single coil pickups, 2 volume and 1 tone controls, black-w-b pickguard, chrome hardware, includes both pickup covers (never mounted), 1-1/2" nut, 34" scale, weighs 10.2 lbs, made in USA, with Fender HSC (orange lining) (SN:Z6172556)
55U-4154
$1,225.00
|
FENDER AMERICAN SERIES 60TH ANNIVERSARY PRECISION BASS (2006)
11 Photos
EC+, shoreline gold finish, alder body, rosewood fretboard, dot markers, 20 frets, American Series pickup, S-1 switching system, (string thru body) bridge, chrome tuners and hardware, b-w-b pickguard, 60th Anniversary badge on back of headstock, very nice, 1-5/8" nut, 34" scale, includes original accessory pack, plastic still on the pickguard, with original thermoplastic HSC (black lining) (SN:Z6134699)
55U-4118
$795.00
|
FENDER DELUXE JAZZ BASS 24 (2006)
9 Photos
EC+, Deluxe Series 5 (five) string, sunburst finish on burled maple top, dark cherry finish on alder body, bolt-on maple neck, rosewood fretboard, dot inlay, 24 frets, Duncan Basslines active Jazz pickup / pre amp configuration, strings anchor thru body, HipShot licensed tapered shaft tuners, 2" nut, 34" scale, import model (SN:06115875)
55U-4165
$600.00
|
FENDER HIGHWAY ONE HOT-ROD PRECISION BASS (2006)
10 Photos
EC+, honey blonde transparent satin finish, alder body, maple "C"-shape neck with 20 fret rosewood fingerboard, dot inlays, 1-5/8" nut width, 34" scale, ALNICO split single-coil pickup, Greasebucket tone circuit, 1 volume and 1 tone, Badass II bridge, chrome hardware, parchment pickguard, 60th anniversary medallion on back of headstock, assembled in the USA, with gigbag (SN:Z6227257)
55U-4131
$675.00
|
FENDER JAZZ BASS (1964)
12 Photos
EC, a true low-end machine, all is right with this bass except the body was refinished natural around 1970 (pro job), original finish and decals still on neck and headstock, neck marked 7 FEB 64A, rosewood fretboard, clay dot markers, 20 frets, pots (date 10th week of '64), pickups, wires, bridge, tuners, strap buttons, pickguard and covers are all original and clean, this bass will fill up the bottom end for any band, 1-5/8" nut, 34" scale, 8.9 lbs., with (super clean) brown OHSC, on consignment (SN:L20267)
55U-3919
$9,000.00
|
FENDER JAZZ BASS (1964)
14 Photos
VGC+, here is a very cool working man's bass, sunburst finish on body is original and shows lots of play wear but looks cool, neck marked 5 JAN 64C has been refinished (pro job) but the original decals are intact, pots dated 10th week of '64, pickups and electronics all original, bridge and tuners are original, 1 new (G) bridge piece installed, tortoise-w-b-w pickguard, the bass looks slick and sounds HUGE, there is a small metal plate installed in front of the treble side of bridge (can't figure out why, but we left it), pickup and bridge covers in case, 1-5/8" nut, 34" scale, with cool cream OHSC (good shape except handle replaced with rope), on consignment (SN:L26604)
55U-4015
$11,000.00
|
FENDER JAZZ BASS (1965)
13 Photos
VG-EC, here is an excellent example of a 60'S Jazz with a killer sound, sunburst finish, rosewood fretboard, dot inlays, 20 frets, neck dated 7 OCT 65A, pots are dated 42nd week of '65, tortoise-w-b-w pickguard, bridge and pickup covers are intact, all original except '73 Fender pickup replaces original neck pickup (pickguard slightly modified to accomodate), the playability and sound is absolutely remarkable, 1-1/2" nut, 34" scale, with OHSC (SN:104113)
55U-4001
$8,200.00
|
FENDER JAZZ BASS (1967)
17 Photos
VG-EC, showing only the play wear you'd expect on a bass that sounds this good, this is just an exceptional instrument, Lake Placid blue finish with matching headstock, heaviest wear is buckle rash on back, neck marked 7 DEC 66A, bound rosewood fretboard, block inlays, 20 frets, pots dated 13th week of '66, neck pickup marked 12-30-66, bridge pickup marked 1-3-67, w-b-w pickguard, bridge, tuners and hardware are all original, a real Hot Dog, 1-1/2" nut, 34" scale, with OHSC (SN:175768)
55U-4111
$13,500.00
|
FENDER MARCUS MILLER JAZZ BASS (2006)
10 Photos
EC+, gloss natural finish, ash body, 1975 style cream-bound one-piece maple neck, 20 frets, pearloid block inlays, 1-1/2" nut width, 34" scale, two vintage-style Jazz pickups, active 2-band EQ (boost only) with bypass switch, factory Badass II bridge, b-w-b pickguard, chrome hardware, made in Japan, with Fender thermoplastic HSC (SN:S030038)
55U-4152
$785.00
|
FENDER MIKE DIRNT PRECISION BASS (2005)
10 Photos
EC+, black finish, modified 1951 style slab body, bolt-on maple neck with Telecaster style headstock, rosewood fretboard, 20 frets, 1 split-coil pickup, chrome hardware, factory Badass II bridge, large w-b-w pickguard, designed by the bassist for Green Day, made in Mexico, 1-9/16" nut, 34" scale, 60th annivesary medallion on back of headstock, made in Mexico, with gigbag (SN:MZ5205120)
55U-4151
$550.00
|
FENDER MUSICMASTER (1980)
11 Photos
EC-, black finish, rosewood fretboard, dot inlays, 19 frets, 1 single coil pickup, b-w-b pickguard, all original, pots date 49th week of "79, 1-11/16" nut, 30" scale, with OSSC (SN:5835814)
55U-4008
$745.00
|
FENDER PRECISION '62 VINTAGE REISSUE (recent)
13 Photos
EC+, just a very cool bass, dark 3 tone sunburst finish, rosewood fretboard, dot markers, 20 frets, vintage style split coil pickup, bridge and tuners, dark finish and tortoise-w-b-w pickguard give this a cool "Texas" look, feather weight, 1-7/8" nut, 34" scale, with nice brown OHSC, on consignment (SN:V167337)
55U-4162
$1,200.00
|
FENDER PRECISION (1960)
12 Photos
VG-EC, 3 tone sunburst finish has faded in a very unusual way (looks cool), finish on wide / thin neck is in very good shape, rosewood fretboard, clay dot markers, 20 frets, pickups and electronics all original except tone pot dated 40th week of '63, tortoise-w-b-w pickguard, bridge, tuners and hardware are all original, bridge and pickup covers are here and on the bass, Duck Dunn, James Jamerson, the KILLER sound, 1-11/16" nut, 34" scale, with HSC, on consignment (SN:44800)
55U-4138
$12,000.00
|
FENDER PRECISION (1964)
14 Photos
EC-, this bass is very COOL, black finish, great wide feeling neck marked 5 SEP 64C, rosewood fretboard, clay dot markers, 20 frets, w-b-w pickguard, pickup, electronics, tuners, bridge and hardware all original, the only things that have been changed are the pickup lead wires. The pots are dated 20th week of '64, the sound of this bass is amazing and it plays great, a tone monster, 1-13/16" nut, 34" scale, with OHSC, on consignment (SN:L45885)
55U-4027
$13,000.00
|
FENDER PRECISION (1974)
11 Photos
VG-EC, a little on the weathered side but still a fine machine, sunburst finish, 1 piece maple neck, dot markers, frets have been pulled and maple inserts installed (not a pretty job but functional), pickup, pots (29th week of '74), bridge, tuners and hardware are all original, newer 1 ply black pickguard, big (BIG) sound, 1-11/16" nut, 34" scale, with OHSC (SN:616969)
55U-4091
$1,985.00
|
FENDER PRECISION BASS (1966)
12 Photos
EC+ except several minor marks and (plugged) extra strap button hole (on lower horn) and some play wear on back of neck (1st position), this 60's low-end monster is an extreamly clean example, vivid 3 tone sunburst finish, neck dated 5 APR 66C, rosewood fretboard, dot markers, 20 frets, pickups, electronics, bridge, tuners and hardware are all original, pots dated 17th week of '66, bridge cover on instrument, pickup cover in case (sorry original screws for cover are not here), medium weight (9.2 lbs), tortoise-w-b-w pickguard, very cool, 1-23/32" nut, 34" scale, with OHSC, price reduced (SN:140854)
55U-3886
$5,950.00
|
FENDER PRECISION BASS (1974)
12 Photos
EC, natural finish (the usual weather checking), one-piece maple neck, 20 frets, 1-5/8" nut width, 34" scale, DiMarzio Model P pickup installed, pots date to 5th week of 1974, w-b-w pickguard, all original hardware (including pickup and bridge covers), great sound, on consignment - price reduced with black tolex OHSC (SN:537319)
55U-3713
$2,140.00
|
FENDER PRECISION BASS (1974)
12 Photos
EC, natural finish, ash body, one-piece maple neck, 20 frets, 1-5/8" nut width, 34" scale, one split-coil pickup (black bobbin), pots date to late 1973, newer bridge saddles, black dome knobs installed, replacement w-b-w pickguard (cracked original included), great sound, with oblong Ibanez HSC (hot pink lining) - price reduced (SN:508187)
55U-3724
$1,975.00
|
FENDER PRECISION BASS (1975)
12 Photos
EC-, natural finish on 4-piece ash body, one-piece maple neck with skunk stripe and black dot inlays, replacement tortoise-w-b pickguard, some screw-holes slightly relocated, original bass side thumbrest now on treble side, split "P" pickup with dark grey bobbins, replaced height adjustment foam as original had deteriorated, discoloration around finish in pickup cavity, small route at bottom of neck pocket allows access to truss rod nut, replacement bone nut, extra string tree added between "A" and "D" strings, CTS pots date to 1975, serial # located on big "F" stamped neck plate with black plastic cushion, very clean neck and body, no covers, replaced strap buttons, chrome hardware, weighs in at 11.4 lbs., with black HSC (red lining) (SN:635179)
55U-4115
$1,885.00
|
FENDER PRECISION BASS (1979)
14 Photos
EC except for one small ding on the edge of the arm bevel, black finish, bolt-on maple neck with skunk stripe, 20-fret maple fingerboard with black dot markers, 1-21/32" nut width, ~34" scale length, one split-coil pickup, black-w-b plastic pickguard, one volume control, one tone control, pots date 20th week of 1979, chrome hardware, very clean and very cool, weight 10.6 lbs, no covers, with Peavey thermoplastic HSC (black lining) (SN:S893918)
55U-4149
$1,800.00
|
HOFNER 500/1 BEATLE BASS (c.1966)
12 Photos
VGC with a fair amount of finish checking, sunburst finish on body, black finish on neck, rosewood fingerboard with pearloid dot inlays, 1-5/8" nut width, ~30-1/4" scale length, raised plastic logo on headstock, four open-geared tuners with pearloid buttons, pearloid pickguard, two staple-top pickups, replacement tone and volume knobs, pearloid control panel with treble, bass, rhythm/solo switches, some touch-up to body/heel area, on consignment, with OHSC, very cool!
55U-3854
$2,400.00
|
HOFNER 65 REISSUE BEATLE BASS (recent)
13 Photos
EC+, sunburst finish, "violin" shaped hollow body, spruce top, maple back and sides, 3-piece maple neck, 22-fret rosewood fingerboard with dot inlays, staple type pickups, trapeze tailpiece, adjustable bridge, open gear tuners, 1-9/16" nut, 30" scale, on consignment, with OHSC (green lining)
55U-4141
$1,400.00
|
IBANEZ ICB300EX ICEMAN EXTREME BASS (recent)
9 Photos
EC- except needs some work (clean electronics, polish frets, replace missing truss rod cover, setup, etc. - sold AS-IS), classic Iceman body style, black finish, black binding on body, neck and headstock, bolt-on maple neck with rosewood fingerboard, 22 frets, black pearloid block inlays, 2 Ibanez PFR pickups, active EQ, black hardware, 1-5/8" nut width, 34" scale, stamped "USED" on back of headstock, made in Korea (SN:311452042)
55U-4169
$215.00
|
IBANEZ SR400 SOUNDGEAR (2002)
10 Photos
EC-, except needs some work (trouble shoot electronics, neck pickup cuts out, replace screws in control cavity cover, setup, etc. sold AS-IS), light amber finish, offset double cutaway body, bolt-on 3-piece maple neck, 24 fret rosewood fretboard with dot inlays, smokey chrome hardware, body matching peghead overlay, 2 pickup configuration, (DXJ and DXP), active electronics, 1 volume, pickup blend, and 3-band EQ, replacement (home-made) control cavity cover, 34" scale, 1.5" nut width, made in Korea (SN:02122525)
55U-4093
$295.00
|
JACKSON KB1 KELLY BASS (c.1997)
11 Photos
VG-EC except needs work (dress frets, clean electronics, shim pickups, restring and set up, etc. - sold AS-IS), black finish, Professional Series, Kelly body shape, bolt-on maple neck, 22-fret rosewood fingerboard with white dot markers, top load bridge, black hardware, passive PJ pickup setup with volume, blend and tone controls, about 9.5 lbs., 34" scale, 1-9/16" nut width, import model, with black wooden rectangular OHSC (black lining) (SN:9415175)
55U-4135
$325.00
|
MUSIC MAN STINGRAY (1978)
16 Photos
VGC except needs alot of work (heat press neck to relieve back-bow, original frets are very low and may need to be replaced, setup, etc. - sold AS-IS), pre Ernie Ball, natural original finish body (dated Aug. 1978), original thin profile bolt-on maple neck with mahogany skunk stripe (dated Oct. 24, 1978), 21-frets with black dot markers, replacement tortoise-w-b-w pickguard, original pickup and electronics are gone, unknown brand P-Bass style pickup installed in original location (original pickup rout is slightly enlarged, hidden by pickguard) passive tone and volume controls, 3-bolt neck, strings-thru-body bridge, felt mutes are gone but adjusters are intact, chrome hardware, 34" scale, ~1-11/16" nut width, with Yamaha HSC (black lining) (SN:B008222)
55U-4106
$985.00
|
PEAVEY MILLENIUM USA (recent)
14 Photos
EC, transparent sienna finish, flamed maple top on alder body, bolt-on maple neck, 21-fret pau ferro fingerboard with dot inlays, 1-1/2" nut width, 35" scale, 2 Peavey VFL pickups, 1 J-style and 1 MM-style, 3-band active EQ, factory Hipshot bridge and D-tuner, black hardware, made in USA, with thermoplastic OHSC (SN:11469593)
55U-4087
$625.00
|
PEAVEY MILLENIUM USA (recent)
13 Photos
EC, sienna-burst finish, flamed maple top on alder body, bolt-on maple neck, 21-fret pau ferro fingerboard with dot inlays, 1-1/2" nut width, 35" scale, 2 Peavey VFL pickups, one J-style and one MM-style, 3-band active EQ, factory Hipshot bridge and D-tuner, black hardware, made in USA, with thermoplastic OHSC (SN:11156960)
55U-4122
$625.00
|
PRS ELECTRIC BASS (recent)
14 Photos
EC-, light pick scratches, black finish, ash body, bolt on maple neck, rosewood fretboard, 21 frets, abalone dot inlays, 2 passive single coil pickups, 2 volume and 1 tone controls, series / parallel switch, HipShot Ultra Light tuners, chrome-plated machined brass bridge, 1-5/8" nut width, 34" scale, great sound, with OHSC (black lining) (SN:2EB00444)
55U-4100
$1,500.00
|
WARWICK ROCK BASS FORTRESS (recent)
11 Photos
EC+, burgundy-burst finish, double cutaway alder body, bolt-on maple neck, 24-fret rosewood fingerboard without inlays, 1-1/2" nut width, 34" scale, MEC P-J pickup configuration, 2-band active EQ, black hardware, made in China, with Gibson gigbag (SN:RBC017307-04)
55U-4166
$395.00
|
WARWICK ROCKBASS CORVETTE FRETLESS BASIC 4 (2005)
11 Photos
EC+, transparent black finished alder body, bolt-on maple neck with fretless rosewood fingerboard, side dots, 1-1/2" nut width, 34" scale, 2 MEC pickups, active volume, pickup blend, treble and bass controls, chrome hardware, made in China, with rectangular black HSC (black lining) (SN:RB1027808-05)
55U-4157
$385.00
|
WARWICK ROCKBASS CORVETTE IV FRETLESS (2005
11 Photos
EC, transparent black finish, double cutaway alder body , bolt-on maple 4 string neck, fretless rosewood fretboard, no inlays, 2 MEC pickups, volume, pickup blend and 2-band active EQ, chrome hardware, made in China, 1-1/2" nut, 34" scale (SN:027766-05)
55U-4069
$450.00
|
WARWICK THUMB BLEACHED BLONDE (2003)
12 Photos
EC+, 2003 Limited Edition, ash body with high-grade maple top, bolt-on maple neck, 24-fret maple fingerboard with sunset and wolf inlays, 1-17/32" nut width, 34" scale length, two MEC active Gold JJ pickups, MEC active EQ, chrome hardware, # 3 / 348, signed by Warwick founder Hans Peter Wilfer, with HSC (black lining) (SN:3/318)
55U-4139
$1,450.00
|
WASHBURN RB2000 (2000)
11 Photos
EC, natural finish, Bantam Series, offset double cutaway body, bolt-on maple neck, 24 fret rosewood fingerboard, offset pearl dot inlays, 1 humbucking pickup, brushed chrome hardware, strings-thru-body bridge, 1-1/2" nut width, 34" scale, with HSC (SN:0002425)
55U-3981
$425.00
|
WASHBURN XB-200 BANTAM (recent)
12 Photos
EC- except needs some repair (polish frets, clean electronics, setup, etc. - sold AS-IS), off-set double cutaway solid body, black finish, bolt-on maple neck, 24 fret rosewood fretboard, off-set dot inlays, dual pickup configuration, 2 volume and 1 tone controls, 3-way pickup selector, heavy chrome bridge, sealed tuners, 1-11/16" nut, 34" scale, made in Asia (SN:54081800)
55U-4130
$185.00
|
Electric Basses
 other vintage and used categories . . .
|
|
|
|
| 
