EC+, acoustic-electric, rounded cutaway, sunburst finish, solid cedar top, sycamore back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with side dot markers, slotted diamond inlay on 12th fret, ebony direct-coupled bridge, factory Alvarez System 600T MKII pickup system with built in tuner, white-bound body, abalone top purfling and soundhole rosette, gold tuners with amber buttons, clear pickguard, 15-1/4" lower bout, 25" scale, 3-7/8" to 4-7/8" body depth, 1-11/16" nut width, with tan OHSC (black lining), on consignment (SN:69543)
20U-11693
$900.00
ALVAREZ YAIRI WY-1PRP BOB WEIR SIGNATURE MODEL (1990's)
11 Photos
EC-, laminated sycamore construction, 15-1/4" lower bout, 000-size, rounded cutaway, transparent purple finish, 14-fret mahogany neck, 20-fret ebony fingerboard with pearl and abalone inlay at 12th fret, ebony direct coupled bridge, abalone rosette and top purfling, cream-bound body, gold tuners, Alvarez System 500 pickup / preamp system, made in Japan, on consignment, with arched-lid OHSC (black lining), Price Reduced (SN:58785)
20U-11404
$875.00
|
BABICZ IDENTITY DRW-06 (recent)
14 Photos
EC-, interesting design featuring a lateral compression soundboard (strings hook into ferrules that are attached directly to soundboard and internal bridge plates), continually adjustable neck and torque reducing split bridge, all solid woods, natural satin finished spruce top, natural gloss finished rosewood back and sides, 14-fret mahogany back and neck, 20-fret rosewood fingerboard with dot inlays, clear pickguard, black Grover Rotomatic tuners, 15-1/2" lower bout, 25.5" scale, 4-1/8" to 4-5/8" body depth, 1-11/16" nut width, black-bound body and fretboard, faux abalone soundhole rosette, with OHSC (blue lining), on consignment (SN:0536202)
20U-11704
$650.00
|
BOURGEOIS COUNTRY BOY DELUXE (recent)
12 Photos
EC+, D-size, sunburst finished Adirondack spruce top, flamed mahogany back and sides, 14-fret mahogany neck, rosewood-bound 20-fret ebony fingerboard, pearl micro dot inlays, 1-3/4" nut width, 25-1/2" scale, ebony bridge, tortoise plastic pickguard, rosewood-bound body, Brazilian rosewood headstock overlay, gold Waverly tuners with butterbean buttons, interior label signed by Dana Bourgeois, fine sound, on consignment, with arched-lid HSC (blue lining) -price reduced (SN:003843)
20U-11388
$2,950.00
|
BOURGEOIS SLOPE D BK (recent)
14 Photos
EC+, slope shoulder "D" size, # 5 of 30 piece limited edition, faithful reproduction of Bryan Suttons' "BANJO KILLER", striking bearclaw sitka spruce top, figured mahogany back and sides, ivoroid bound body with b-i-b top purfling, "D/B" backstrip, mahogany neck, Brazilian rosewood headstock veneer with pearl "Bourgeois" logo inlay, 1-23/32" nut width, 25.5" scale, 20 fret ivoroid bound fretboard, Brazilian rosewood also used for fretboard and bridge, bone bridge saddle and nut, ivoroid end and bridge pins, tortoise plastic pickguard, vintage style Waverly tuners with butterbean buttons, label signed by Bryan Sutton and Dana Bourgeois, handcrafted in Lewiston, Maine, black arched lid HSC (burgundy lining) (SN:003780)
20U-11637
$3,200.00
|
BREEDLOVE AC25/SR PLUS (2005)
12 Photos
EC-, Atlas Series, acoustic-electric, grand concert size, gloss natural finish, soft cutaway, solid spruce top, rosewood sides and (solid) back, 14-fret mahogany neck, 20-fret rosewood fingerboard with abalone Ellipse inlays, 1-11/16" nut width, 25-1/2" scale, 15-3/8" lower bout, 3-3/4" to 4-5/8" body depth, rosewood pinless bridge, ivoroid-bound body and fretboard, abalone top purfling and soundhole rosette, gold Grover Rotomatic tuners, factory Fishman Classic 4T pickup system with built in tuner, made in Korea, with OHSC (black lining) (SN:05121031)
20U-11605
$685.00
|
BREEDLOVE FOCUS (2005)
16 Photos
EC- except for repaired top crack, 15-1/4" lower bout, rounded cutaway, gloss natural finish, solid cedar top, solid rosewood back and sides, 14-fret mahogany neck, black-bound 20-fret ebony fingerboard, abalone "Focus" inlays, 1-3/4" nut width, 25-1/2" scale, pinless ebony bridge, abalone soundhole ring, black-bound body, w-b-w-b top purfling, ebony headstock overlay with pearl "B" inlay, chrome Grover mini Rotomatic tuners, L.R. Baggs Dual Source pickup / mic / preamp system, fine sound, with arched-lid OHSC (black lining) (SN:8461)
20U-11689
$1,750.00
|
BREEDLOVE SC/W (1995)
12 Photos
EC with a few minor top dings, 15-1/4" lower bout, rounded cutaway, natural gloss finish, spruce top, walnut back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with offset dot inlays, 1-25/32" nut width, 25-1/2" scale length, pinless ebony bridge, black-bound body and fingerboard, gold Grover mini-Rotomatic tuners, rosewood headstock overlay with pearl "B & CO." inlay, on consignment, with black OHSC (black lining) (SN:95-185)
20U-11471
$1,550.00
|
COLLINGS C10 DELUXE KOA (1996)
12 Photos
EC with minor belt-buckle rash on back, 14-7/8" lower bout, gloss natural finish, spruce top, flamed koa back and sides, 14-fret mahogany neck, ivoroid-bound 20-fret ebony fingerboard with pearl dot inlays, 1-3/4" nut width, 25-1/2" scale, ebony bridge, tortoise plastic pickguard, bone nut and saddle, ivoroid-bound body, ivoroid-bound "haircut" headstock, ebony headstock overlay with pearl "Collings" logo, gold Schaller tuners with ebony buttons, active Fishman Matrix pickup installed, fine sound, handmade in Texas, on consignment, with arched-lid HSC (blue lining) (SN:2518)
20U-11554
$3,500.00
|
COLLINGS D2HA (recent)
15 Photos
EC+, gloss natural finish, Adirondack spruce top with herringbone top trim, scalloped bracing, Indian rosewood back and sides, zipper backstripe, ivoroid-bound body, 14-fret mahogany neck, 20-fret ebony fretboard with slotted diamond inlays, 1-23/32" nut width, 25-1/2" scale length, ebony bridge, tortoise plastic pickguard, squared headstock with Brazilian overlay and pearl "Collings" logo, Waverly tuners with butterbean buttons, handcrafted in Texas and has the big sound to match, on consignment, with Geib-style OHSC (green lining) (SN:9588)
20U-11665
$3,400.00
|
COLLINGS D3 (2002)
13 Photos
EC- with a couple small dings near the pickguard, 15-3/4" lower bout, 3-7/8" to 4-3/4" body depth, gloss natural finish, spruce top, Indian rosewood sides and back with multicolored backstrip, 14 fret mahogany neck, 20 fret ebony fingerboard with side dot markers, 1-11/16" nut width, 25.5" scale, ebony bridge, ivoroid bound body and fretboard, triple bound headstock with Brazilian rosewood overlay and pearl "Collings" logo, abalone soundhole rosette, tortoise plastic pickguard, gold Waverly tuners with butterbean buttons, b-ivoroid-b-w-b top purfling, handcrafted in Texas, BIG sound, with Geib-style OHSC (green lining) (SN:8207)
20U-11688
$2,985.00
|
COLLINGS OM2H (2004)
12 Photos
EC with one repaired top crack, 000-size, 15" lower bout, gloss natural finish, spruce top with scalloped bracing, Indian rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard, slotted diamond inlays, 1-3/4" nut width, 25-1/2" scale, ebony bridge, small tortoise plastic pickguard, ivoroid-bound body, herringbone top trim, Brazilian rosewood headstock overlay with pearl logo, nickel Wavery tuners with butterbean buttons, fine sound, with arched-lid OHSC (green lining) (SN:9150)
20U-11165
$2,700.00
|
COLLINGS OM2H (2005)
13 Photos
EC-, 15" lower bout, gloss natural finish, spruce top with scalloped bracing, Indian rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with slotted diamond inlays, 1-3/4" nut width, 25-1/2" scale, 3-3/8" to 4" body depth, ebony bridge, small tortoise plastic pickguard, ivoroid-bound body, herringbone top purfling, Brazilian rosewood headstock overlay with pearl "Collings" logo, Wavery tuners with butterbean buttons, L.R. Baggs Imix pickup system installed, good sound, with arched-lid OHSC (green lining) (SN:10809)
20U-11618
$2,775.00
|
COLLINGS SJ SB CUSTOM (recent)
12 Photos
EC+, 16-1/8" lower bout, full body sunburst finish and neck as well (FBSB), spruce top with scalloped bracing, highly flamed maple back and sides, 14-fret flamed maple neck, 20-fret ebony fingerboard with notched and scalloped diamond inlays, 1-3/4" nut width, 25-5/8" scale length, ebony bridge, tortoise plastic pickguard, tortoise plastic-bound body, fingerboard and headstock, ebony headstock overlay with pearl "Collings" logo and fancy pearl inlay, nickel open-gear Waverly tuners with ebony buttons, fine sound, on consignment, with arched-lid OHSC (green lining) (SN:13219)
20U-11527
$4,200.00
|
COMPOSITE ACOUSTICS COT (2007)
12 Photos
EC+, acoustic / electric, carbon burst (black) finish, modern (in a cool way) all carbon fiber instrument (except for inlays), D size body with "vintage voiced" X braced top, red paua COT flame rosette, heel-less soft V profile neck, paua dot fretboard inlays, 20 frets, red paua COT headstock inlays, L.R. Baggs iMix pickup / preamp system, very nice look and sound, 1-3/4" nut, 25-1/2" scale, with HSC (SN:D540906062)
20U-11540
$1,650.00
|
CORT MR600N (1999)
10 Photos
EC except needs some work (cut down bridge and saddle to lower action, reglue bridge, setup, etc., - sold AS-IS), D-size body with florentine cutaway, spruce top with oval soundhole, mahogany back and sides, mahogany neck with 22 fret rosewood fingerboard, dot inlays, 6-in-a-line headstock, chrome sealed tuners, black plastic pickguard, made in Korea, gigbag
20U-11646
$125.00
|
EMENEE "OHIO ART" BOSS GUITAR AMERICA PLASTIC TOY GUITAR (1980'S)
6 Photos
VGC, all plastic construction, red top with injection molded integral bridge, paper label with the "Ohio Art BOSS Guitar America" on it, white body and neck, red fingerboard with 16 integral frets, 1-17/32" nut width, 19" scale, red plastic headstock overlay, plastic tuners missing, made by Emenee Industries of Bryan, Ohio. Not to be confused with a functioning instrument, this is a collectible TOY. Sold AS-IS.
20U-11157
$25.00
|
EPIPHONE FT-30 CABALLERO (1964)
16 Photos
EC-, except several finish chips along back body edge, small body, 14-1/4" lower bout, 3-1/2" to 4-3/8" body depth, all mahogany construction, ladder-braced top, 20 fret rosewood fingerboard with pearloid dot inlays, tortoise plastic top binding, reverse belly plastic bridge, screwed down tortoise plastic pickguard with silver epsilon "E" logo, black headstock with gold logo, 3-on-a-plate open-gear tuners, 1-5/8" nut width, 24-3/4" scale, made by Gibson in the U.S.A. (very similar to Gibson LG-0), with black flat-lid semi-hardshell case (gold interior) (SN:212037)
20U-11676
$850.00
|
FROGGY BOTTOM P-12 DELUXE (2007)
13 Photos
EC++, 13-1/2" lower bout, parlor-size, gloss natural finish, solid spruce top with scalloped braces, solid figured walnut back and sides, 12-fret mahogany neck with slotted headstock, 20-fret ebony fingerboard with fancy abalone inlays, 1-3/4" nut width, 24-7/8" scale length, ebony bridge, small tortoise plastic pickguard, abalone rosette, maple bound body, white heel cap cover with cool biplane design, abalone backstrip, white-bound Brazilian rosewood headstock overlay with abalone frog inlay, gold Waverly tuners with butterbean buttons, handcrafted in the U.S.A., fine sound, with arched-lid HSC (green lining) (SN:P1171)
20U-11513
$5,000.00
|
GALLAGHER STEVE KAUFMAN SIGNATURE MODEL (2006)
13 Photos
EC, D-size, sharp cutaway, sunburst finished Engelmann spruce top, Indian rosewood back and sides, fancy multi-colored herringbone backstrip, bone nut and saddle, 14-fret mahogany neck, 20-fret ebony fingerboard with slotted diamond and catseye inlays, "Steve Kaufman" inlaid in 12th fret, ivoroid-bound body, fretboard and headstock, ebony bridge, abalone top purfling and soundhole rosette, rosewood peghead overlay with "G" and fancy inlays, tortoise plastic pickguard, gold Schaller tuners, factory Fishman pickup installed, 25.4" scale, 15-5/8" lower bout, 1-3/4" nut width, 4" to 4-13/16" body depth, handcrafted by Don Gallagher in the U.S.A., with TKL HSC (burgundy lining), on consignment (SN:3192)
20U-11679
$2,950.00
|
GIBSON 1942 ROSEWOOD SOUTHERN JUMBO REISSUE (2004)
13 Photos
EC, 16" lower bout, 3-3/4" to 4-3/4" body depth, sloped shoulders, sunburst finished spruce top, rosewood back and sides, 14-fret mahogany neck, 19-fret rosewood fingerboard with pearl double parallelogram inlays, 1-23/32" nut width, 24-3/4" scale, rosewood belly bridge with long saddle and pearl dot inlays, white-bound body and fretboard, b-w-b-w top purfling, b-w-b back purfling, firestripe tortoise plastic pickguard, Kluson-style tuners with white buttons, banner headstock reads "ONLY A GIBSON IS GOOD ENOUGH", interior orange label reads "FULLER'S VINTAGE GUITAR", with black OHSC (blue lining) (SN:029894004)
20U-10986
$2,550.00
|
GIBSON HARLEY DAVIDSON LIMITED EDITION (1994)
12 Photos
EC except could use work (refret to true and straighten fingerboard, restring and set up, etc. - sold AS-IS), #192 of 1500, gloss black finish, 15-3/4" lower bout, 3-3/4" to 4-5/8" body depth, all solid woods, spruce top, maple back and sides, 14-fret maple neck, white-bound 20-fret ebony fingerboard with pearl shield inlays, 1-23/32" nut width, 24-3/4" scale, ebony belly bridge, dual black pickguards (stenciled "Harley-Davidson"), w-b-w double-bound, body, pearl headstock inlays of Gibson and H-D logos, nickel tuners, 100th Anniversary interior label, these guitars were originally sold at Harley dealerships, with certificate of authenticity, and black wooden OHSC (Harley orange lining) (SN:92294012)
20U-11547
$2,100.00
|
GIBSON HUMMINGBIRD (1966)
14 Photos
VG-EC with a repaired headstock crack / top crack and needs work (repair top center seam, reglue pickguard, reset neck, level and dress frets, strings, setup, etc. - sold AS-IS), 15-7/8" lower bout, square-shouldered D-shape, sunburst finished spruce top (appears to be oversprayed), cherry stained mahogany back and sides (sides appear to be slightly oversprayed), 14-fret mahogany neck, white-bound 20-fret rosewood fingerboard with pearl dual parallelogram inlays, 1-19/32" nut width, 25-1/2" scale, rosewood reverse belly bridge, plastic pickguard embosed with hummingbird and flower motif, white-bound body, pearl "Gibson" and crown headstock inlays, gold Kluson Deluxe tuners with single ring keystone buttons, with flat-lid HSC (black lining) (SN:405085)
20U-11535
$2,400.00
|
GIBSON HUMMINGBIRD (1968)
12 Photos
VG-EC except needs work (reset neck, level and dress frets, strings, setup, etc. - sold AS-IS), square-shouldered D-shape, natural finished spruce top, cherry stained mahogany back and sides, 14-fret mahogany neck, white-bound 20-fret rosewood fingerboard with pearl dual parallelogram inlays, 1-9/16" nut width, 25-1/2" scale, replacement rosewood reverse belly bridge, oversize rosewood bridgeplate installed, replacement black plastic pickguard, white-bound body, pearl "Gibson" and crown headstock inlays, gold Kluson Deluxe tuners with single ring keystone buttons, passive K&K pickup installed, with flat-lid HSC (beige lining) (SN:940008)
20U-11175
$1,700.00
|
GIBSON J-45 ADJ (1967)
13 Photos
EC- except needs work (reset neck, reglue bridge, glue cracked bridge, replace saddle, tortoise plastic pickguard, white-bound body, install endpin, level and dress frets, strings, setup, etc. - sold AS-IS), D-size, sloped shoulders, 16" lower bout, sunburst finish, spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with pearloid dot inlays, 1-11/16" nut width, 24-1/2" scale length, replacement ebony bridge with adjustable saddle, nickel Kluson Deluxe tuners with white plastic buttons, with OSSC (red lining) (SN:000255)
20U-11536
$1,800.00
|
GIBSON J-45 ROSEWOOD (1999)
13 Photos
EC except needs some work (reglue loose bridge, possibly touch-up large finish wrinkle along front of bridge, setup, etc. - sold AS-IS), double bound sloped shoulder D body, sunburst finish, solid spruce top, very nice rosewood back and sides, black finished mahogany 14-fret neck, ebony bridge and fretboard, pearl propeller inlays, 20 frets, abalone rosette, tortoise plastic pickguard, gold Grover tuners, built in Montana, 1-11/16" nut, 24-3/4" scale, with brown HSC (red lining) (SN:90479009)
20U-11274
$1,685.00
|
GIBSON LG-2 (1942-46)
13 Photos
VG-EC except needs work (reglue bridge, glue back center seam, glue pickguard, borderline for neck reset, strings, setup, etc. - sold AS-IS), 14-3/8" lower bout, sunburst finished X-braced spruce top, 14-fret mahogany neck, 19-fret Brazilian rosewood fingerboard with dot inlays, 1-3/4" nut width, 24-7/8" scale, white-bound body, tortoise plastic pickguard, Brazilian rosewood bridge with 2 dots, tortoise plastic pickguard, 3-on-a-plate open-gear riveted tuners with white-plastic buttons, banner headstock logo reads "ONLY A GIBSON IS GOOD ENOUGH", with SSC (blue interior) (SN:2395 12)
20U-11372
$3,500.00
|
GOODALL TR000-12S
13 Photos
EC+, 000-body size, Master grade Adirondack spruce top with scalloped bracing, Indian rosewood back and sides, 12-fret neck with slotted headstock, 20-fret ebony fingerboard with slotted square inlays, ebony bridge, maple body and headstock binding, herringbone top purfling and soundhole rosette, tortoise plastic pickguard, ebony peghead overlay with winged "G" logo, Waverly Sloane tuners with ebony buttons, 15-1/4" lower bout, ~25" scale, 1-13/16" nut width, 3-3/4" to 4-1/8" body depth, bone saddle, fossilized ivory nut, very nice sound, with newer Geib-style Goodall HSC (green lining), on consignment (SN:3779)
20U-11647
$3,850.00
|
GRIT LASKIN JUMBO "THE PITCH" (2003)
13 Photos
EC++, 16-1/2" lower bout, gloss natural finish, Sitka spruce top, Indian rosewod back and sides with contoured Laskin armrest, 14-fret mahogany neck, 21-fret ebony fingerboard with offset abalone dot inlays, 1-3/4" nut width, 25-5/8" scale, ebony bridge, clear pickguard, ebony-bound body with maple-ebony-maple side and back purfling and m-e-m-rosewood top purfling (extending around fingerboard extension), elaborate inlaid rosette with two rings of abalone purfling, chrome Schaller tuners with ebony buttons, wonderful sound, and topped off with one of Laskin's incredible signature inlays: a baseball pitcher in mid-throw, right foot extended to mid first fret, with a background of a blue sky, back fence, and coincidentally, an Elderly Instruments billboard. This amazingly realistic work of art is executed in mother-of-pearl, gold mother-of pearl, Walrus Ivory, Lapis, Mexican turquoise, Red Coral, Orange Spiney shell, Tahitian Blacklip pearl, gold, and Obsidian. The artistic nature of Grit's inlays truly must be seen to be appreciated, and like all of Grit's guitars, this sounds great too, with custom Calton HSC
20U-9619
$8,500.00
|
GUILD D-25 (1979)
13 Photos
VGC+, D-size, 15-7/8" lower bout, dark stained finish, spruce top, mahogany sides and arched back, 14-fret mahogany neck, 20-fret rosewood fingerboard, dot inlays, 1-11/16" nut width, 25-1/2" scale, rosewood bridge, tortoise plastic pickguard, black-bound body with white-b-w top purfling, 3-on-a-side open gear tuners, made in Westerly, R.I., with arch-lid HSC (purple lining) (SN:202242)
20U-11695
$825.00
|
GUILD F50 BL (1978)
15 Photos
EC except needs some work (dress frets, reglue bridge, reglue edge of pickguard, rub glue into top seam, setup, etc. - sold AS-IS), natural finish, double bound 17" body, spruce top, maple sides, (arched) back and neck, bound ebony fretboard, abalone triangle in pearl block inlays, 20 frets, ebony bridge, large black pickguard, large G inlay on bound headstock, gold hardware, 1-11/16" nut, 25-1/2" scale, made in Westbury, RI, with OHSC (burgundy lining) (SN:181657)
20U-11620
$1,525.00
|
HARMONY STELLA MODEL H928 (1960's)
17 Photos
VGC except needs work (repair missing chunk in back, fix separating back seams, replace missing bridge, new nut, refret to straighten bowed neck, restring and setup, etc. - sold AS-IS) 0-size, 13-1/8" lower bout, striped blond finish, 12-fret neck, solid headstock, 18-fret fingerboard with silkscreened "inlays", 1-3/4" nut width, ~24" scale, painted on top purfling and soundhole edge, tortoise plastic pickguard, trapeze tailpiece, 3-on-a-plate open-gear tuners, built in the USA, a wall hanger in a rare color that looks OK from the front, with brown OSSC (missing handle) (SN:3453H928)
20U-11613
$40.00
|
HUSS & DALTON TOM-M CUSTOM (2007)
12 Photos
EC+, here's a visually stunning guitar from our friends at Huss & Dalton, gloss black finish, Adirondack spruce top with scalloped bracing, mahogany back and sides, grained ivoroid-bound body, fretboard and headstock, abalone top purfling and soundhole rosette, abalone torch headstock inlay, 14-fret mahogany neck, 20-fret ebony fingerboard with snowflake inlays, ebony bridge, chrome Waverly tuners with butter bean buttons, 15-1/8" lower bout, 3-3/8" to 4-1/4" body depth, 24.9" scale (short scale), 1-3/4" nut width, 2-3/16"string spacing at the saddle, guitar is signed and dated under top, great guitar! with tweed OHSC (brown lining), on consignment (SN:2136)
20U-11509
$4,800.00
|
JAMES OLSON JUMBO CUSTOM (1996)
11 Photos
EC, jumbo body, 17" lower bout, 3-7/8" to 4-3/4" body depth, nice tight-grained spruce top, Indian rosewood back and sides, 5-piece 14 fret mahogany-maple-rosewood-maple-mahogany neck, 20 fret ebony fingerboard with snowflake inlays, ebony bridge, abalone top purfling and soundhole rosette, black pickguard, tortoise plastic body binding, wood back purfling, herringbone backstrip, ebony peghead overlay with maple-ebony-maple border and pearl "O" inlay, gold Schaller tuners, ebony truss rod cover, 25.4" scale, 1-3/4" nut width, excellent sound! Beautifully handcrafted in Minnesota, Fishman Matrix pickup installed, with Calton Deluxe HSC (gray with red lining), on consignment (SN:603)
20U-9446
$12,000.00
|
LARRIVEE 30TH ANNIVERSARY MODEL (1997)
14 Photos
EC+, Limited Edition, #14 of 100, based on the C-10 model with Custom Appointments, gloss natural finish, sharp cutaway, spruce top, Brazilian rosewood back and sides, 14-fret mahogany neck, ivoroid-bound 20-fret ebony fingerboard with fancy pillar with bow and floral tree, ebony bridge with floral inlays, Brazilian rosewood peghead overlay with border and very elaborate inlay of a woman looking in a mirror, banner on inlay reads "1967 - 1997", abalone top purfling and soundhole rosette, clear pickguard, chrome tuners, wood body bindings and purflings, 16-1/8" lower bout, 3-5/8" to 4-1/2" body depth, ~25-5/8" scale, 1-23/32" nut width, L.R. Baggs active I-beam pickup installed with 1/4" endpin jack, inside label is signed, very nice guitar! Built in Canada, with black faux snakeskin OHSC (green lining), on consignment (SN:14-19963)
20U-11698
$6,250.00
|
LARRIVEE D-09 CUSTOM (c.2002)
13 Photos
EC-, gloss natural finish, spruce top, Indian rosewood back and sides, 14-fret mahogany neck, ivoroid-bound 20-fret ebony fingerboard, Custom fleur-de-lis inlays, 1-11/16" nut width, 25-1/2" scale, 15-3/4" lower bout, 3-5/8" to 4-5/8" body depth, ebony bridge, tortoise plastic pickguard, abalone soundhole rosette, maple-bound body, ebony headstock overlay with pearl "Larrivee" logo and silver trim, chrome tuners, Donnell Mini-Flex microphone installed with 1/4" endpin jack, made in Vancouver, BC., with Larrivee OHSC (black lining), on consignment (SN:48826)
20U-11687
$1,400.00
|
LARRIVEE L-11 (c.1978)
9 Photos
EC- with repaired top / side cracks and finish checking throughout top, 16-1/4" lower bout, sloped-shoulder L-size, natural finish, spruce top, rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with pearl dot inlays, 1-3/4" nut width, 25-1/2" scale length, ebony bridge, chrome Grover Rotomatic tuners, rosewood headstock overlay, on consignment, with flat-lid HSC (SN:110449)
20U-10948
$1,200.00
|
LARRIVEE OM-05 (recent)
12 Photos
EC+, gloss natural finish, spruce top, mahogany back and sides (all solid woods), 15-1/4" lower bout, 4-1/4" to 3-5/8" body depth, 14-fret mahogany neck, ivoroid-bound 20-fret ebony fingerboard with micro-dot inlays, 1-3/4" nut width, 25-1/2" scale, ebony bridge, tortoise plastic pickguard, flamed maple-bound body with b-w-b purfling, abalone rosette, ebony headstock overlay with pearl logo and trim, chrome tuners, handcrafted in the USA, good sound, on consignment, with arched-lid OHSC (black lining) (SN:72174)
20U-11625
$1,200.00
|
LARRIVEE SD-60 (recent)
12 Photos
EC+, 15-3/8" lower bout, D-size with sloped shoulders, solid spruce top with large soundhole, solid Indian rosewood back and sides, 12-fret mahogany neck with slotted headstock, ivoroid-bound 18-fret ebony fingerboard with pearl diamond inlays, 1-29/32" nut width, 25-5/8" scale, ebony pyramid bridge, tortoise plastic pickguard, flame maple body binding, herringbone top purfling, abalone soundhole rosette, rosewood peghead overlay with pearl "Larrivee" logo inlay, nickel open-gear tuners with ebony buttons, made in the U.S.A., on consignment, with arched-lid OHSC (black lining) (SN:70994)
20U-11579
$1,900.00
|
LAUGHLIN 000-12 FRET (2000)
10 Photos
EC+ with one well repaired top crack at lower treble bout, 000-size, gloss natural finish, spruce top, highly flamed koa back and sides, 12-fret mahogany neck with slotted headstock, 20-fret ebony fingerboard with side dot markers, 1-13/16" nut width, 24-7/8" scale, ebony pyramid bridge, ivoroid-bound body, fingerboard and headstock, fancy marquetry rosette and top purfling, ebony headstock overlay with pearl and abalone "LAUGHLIN" logo, Waverly Sloane tuners with ivoroid buttons, neck has been reset by our shop, handcrafted in the U.S.A., fine sound, handcrafted in California by Tim Laughlin, with arched-lid HSC (burgundy lining) (SN:1204)
20U-11398
$2,300.00
|
LOWDEN O-388C (c.2000)
12 Photos
EC+, solid spruce top with cocobolo back and sides, 16-3/16" lower bout width, 4-15/16" to 4" body depth, wood binding top and back, bound 20 fret rosewood fretboard, diamonds and dots inlays, mahogany neck with center strip of walnut between two strips of rosewood, abalone rosette, rosewood peghead overlay with pearl "Lowden" inlay, gold Gotoh tuners with amber buttons, pinless rosewood bridge with two-piece saddle, 1-3/4" nut width, 25-1/2" scale, in Newtownards, N. Ireland, with thermoplastic OHSC (red lining) (SN:13955)
20U-11553
$3,250.00
|
MATON C185 CUSTOM JUMBO (recent)
11 Photos
EC+, gloss natural finish, all solid woods, spruce top, blackwood back and sides, 14-fret maple neck, 21-fret rosewood fingerboard with dot inlays, rosewood bridge, herringbone top purfling and soundhole rosette, black pickguard, gold tuners, 16" lower bout, 4" to 5" body depth, 25.5" scale, 1-23/32" nut width, similiar to AJ85, nice workmanship, built in Australia, with Hiscox thermoplastic OHSC (mauve lining) (SN:191 (0701))
20U-11464
$1,650.00
|
NORMAN B20 FOLK (recent)
10 Photos
EC except needs minor work (minor fret level, strings, setup, etc. - sold AS-IS), 14-3/4" lower bout, folk-size, satin finish, solid spruce top, cherry back and sides, 14-fret maple neck (neck has been nicely re-shaped to a "V"), 21-fret rosewood fingerboard with pearl dot inlays, 1-11/16" nut width, 24-7/8" scale length, rosewood bridge, soundhole rosette, chrome tuners, made in Canada (SN:05202693)
20U-11102
$250.00
|
OLYMPIA OMC-1CE (recent)
12 Photos
EC- except needs some work (dress frets, clean, setup, etc. - sold AS-IS), satin finish solid cedar top with offset "Wing" soundhole, solid mahgogany back and laminated mahogany sides, bolt-on mahogany neck, 22 fret rosewood fretboard, 1.75" nut width, 25.5" scale, rosewood bridge with scratches around bridge pins, compensated saddle, Fishmam Classic 4 preamp, chrome sealed tuners, import version of the Tacoma Chief model, made in Indonesia, OHSC (ivory lining) (SN:SI21026703)
20U-11622
$240.00
|
OVATION 1778T ELITE (2006)
12 Photos
EC++, 15-13/16 lower bout, single cutaway, mid-depth bowl body, textured lusty red finish, solid spruce top with 11 small soundholes on bass side upper bout, two-piece maple neck, 1-11/16" nut width, 25-1/4" scale length, black tuners, ebony bridge, Ovation OP-Pro Series onboard pickup system with built-in tuner, made in New Hartford, Connecticut, with OHSC (SN:603914)
20U-11015
$725.00
|
OVATION 1778T ELITE TRIBAL FLAMES (recent)
15 Photos
EC+, solid spruce top, mid-depth bowl body with cutaway, mahogany neck with ebony fretboard, 1-11/16" nut width, 25-1/4" scale, Ovation LX bracing, multiple soundholes, ebony bridge, black hardware, Ovation OP-30 preamp, purple tribal flame design on top and headstock, OHSC (black lining), made in USA (SN:606527)
20U-11595
$925.00
|
OVATION ADAMAS W-597 (2006)
13 Photos
EC+, white-bound graphite black crossweave carbon fiber top, mid depth cutaway body, Adamas soundholes and epaulets, gloss finished 2-piece mahogany neck with maple-ebony-maple center strip, 17 fret ebony fingerboard with treble extension, side dot markers only, 1-11/16" nut width, 25-1/4" scale, 15-7/8" lower bout, pinless ebony bridge, OP50 pickup / preamp system with built in chromatic tuner, gold hardware, built in the U.S.A., with black thermoplastic OHSC (black lining) (SN:21867)
20U-11673
$1,425.00
|
OVATION S771 BALLADEER SPECIAL (recent)
12 Photos
EC- except needs some minor work (level/dress frets, minor setup, etc. - sold AS-IS), acoustic-electric, rounded cutaway, standard depth bowl, natural satin finish, solid spruce top, mahogany neck, 20 fret rosewood fingerboard with side dots (no inlays), 1-11/16" nut width, 25-1/2" scale, pinless walnut bridge, white-bound top, chrome Ping tuners, factory OP-24+ pickup / preamp system, made in the USA, with black thermoplastic OHSC (SN:539980)
20U-11681
$385.00
|
OVATION STANDARD BALLADEER 1861-LX (recent)
12 Photos
EC+, acoustic-electric, rounded cutaway, super shallow bowl, white bound gloss red-burst finish, b-w-b top purfling, satin finished mahogany neck, bound rosewood fingerboard, dot markers, 20 frets, pinless walnut bridge, factory pickup system with 3 band EQ and built-in tuner, chrome tuners, 1-11/16" nut, 25-1/2" scale, made in USA, with black thermoplastic OHSC (black lining) (SN:607534)
20U-11651
$735.00
|
OVATION STANDARD ELITE 6778LX (recent)
13 Photos
EC+, acoustic-electric, rounded cutaway, natural finish, spruce top with Adamas-style soundholes, scalloped LX bracing, 5-piece mahogany and maple neck, white-bound 22-fret rosewood fingerboard with dot and diamond inlays, pinless rosewood bridge, Lyrachord GS mid-depth body, factory Ovation OP-PRO pickup system, chrome tuners, 15-3/4" lower bout, 25.4" scale, 1-11/16" nut width, built in the U.S.A., with black thermoplastic OHSC (black lining) (SN:611424)
20U-11703
$825.00
|
RANDALL KRAMER BIG SKYE (2005)
12 Photos
EC+ with a small finish flaw on back, 14-5/8" lower bout, solid spruce top with nice bearclaw figure, solid Brazilian rosewood back and sides, 14-fret mahogany neck, rosewood-bound ebony fingerboard, 1-25/32" nut width, 25-1/2 scale length, ebony bridge, koa top purfling, fancy rosette, rosewood-bound body and headstock, Brazilian rosewood headstock overlay with abalone and pearl inlay, Brazilian rosewood backstrap, chrome Gotoh 510 Super Machine Head tuners with black chrome buttons, handcrafted in California, fine sound, on consignment, with tweed HSC (green lining) (SN:024)
20U-11399
$5,000.00
|
RANDY LUCAS LD-28 (1996)
12 Photos
EC-, D-size, 15-1/2" lower bout, gloss natural finish, Adirondack spruce top, scalloped bracing, forward-shifted X-brace, Brazilian rosewood back and sides, 14-fret mahogany neck (slight V-shape), 20-fretebony fingerboard with slotted diamond inlays, "Lucas" inlay at 12th fret, 1-23/32" nut width, 25-3/8" scale, ebony bridge with long saddle, tortoise plastic pickguard, ivoroid-bound body and headstock, herringbone top trim, Brazilian rosewood headstock overlay with pearl torch inlay, nickel tuners, handcrafted by Randy Lucas, fine sound, on consignment, with arched-lid HSC (black lining) (SN:015-2)
20U-11354
$6,000.00
|
RICH & TAYLOR CUSTOM BRAZILIAN (recent)
12 Photos
EC, D-size, 15-5/8"lower bout, spruce top, Brazilian rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with fancy pearl and abalone engraved leaf inlays, 1-3/4" nut width, 25-5/16" scale length, ebony bridge, white-bound body, fingerboard and headstock, abalone top, back and side purfling, abalone pickguard, fancy headstock inlays, gold tuners, handcrafted in Tennessee, fine sound, label signed by Greg Rich, Mark Taylor and Chris Bozung, with flat-lid HSC (black lining) (SN:9402-010)
20U-11437
$5,500.00
|
SAMUELSON SMALL JUMBO (2002)
12 Photos
VG-EC except for one repaired top crack, gloss natural finish, 16" lower bout, all solid woods, spruce top, mahogany back and sides, 14-fret mahogany neck, 19-fret ebony fingerboard with surfboard shape inlays, ebony bridge, herringbone top purfling and soundhole rosette, wood body binding, curly maple headstock overlay, gold tuners, 25.5" scale, 1-23/32" nut width, built in the U.S.A. by Rick Samuelson, on consignment (SN:#7)
20U-11660
$700.00
|
SANTA CRUZ VINTAGE ARTIST
12 Photos
EC, D-size, gloss natural finish, all solid woods, spruce top, mahogany back and sides, 14-fret mahogany neck, ivoroid-b-w-bound 21-fret ebony fingerboard, pearl dot inlays, 1-23/32" nut width, 25-1/4" scale, 15-1/2" lower bout, ebony bridge, tortoise plastic pickguard, ivoroid-bound body, herringbone top purfling, ivoroid-b-w-bound headstock with mahogany overlay, pearl "SCGC" logo, gold tuners with ivoroid buttons, fine sound, with thermoplastic HSC (gray lining), on consignment - price reduced (SN:4207)
20U-11351
$2,800.00
|
SANTA CRUZ VINTAGE ARTIST (recent)
13 Photos
EC with ~4" scrape on top (not through finish - see photos), D-size, gloss natural finish, spruce top, wild looking sycamore back and sides, 14-fret mahogany neck, 21-fret ebony fingerboard, micro dot inlays, 1-23/32" nut width, 25-3/8" scale, ebony bridge, tortoise plastic pickguard, koa-bound body, herringbone top trim, sycamore headstock overlay, pearl "SCGC" logo, gold open-gear tuners with butterbean buttons, Fishman Matrix pickup installed, with arched-lid HSC (blue lining) (SN:4704)
20U-10741
$2,900.00
|
SANTA CRUZ VINTAGE ARTIST ROSEWOOD (c.2000)
14 Photos
EC with repaired top cracks, D-size, 15-5/8" lower bout, spruce top with high X-brace, rosewood back and sides, 14-fret mahogany neck, 21-fret ebony fingerboard with micro-dot inlays, 1-23/32" nut width, 25-1/2" scale length, ebony bridge, ivoroid-bound body, fingerboard and headstock, tortoise plastic pickguard, Brazilian rosewood peghead overlay, nickel Waverly tuners with butterbean buttons, fine sound, with arched-lid HSC (blue lining) (SN:2679)
20U-11206
$3,100.00
|
SAWCHYN SSJ-83 (recent)
12 Photos
EC+, 16-1/8" lower bout, rounded cutaway, spruce top with bearclaw figure, mahogany back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with slotted diamond abalone inlays, 1-25/32" nut width, 25-5/8" scale length, ebony bridge, fancy rosette, clear plastic pickguard, ivoroid-bound body, fingerboard and headstock, chrome Schaller tuners with ebony buttons, ebony headstock overlay with abalone "S" inlay, handcrafted in Canada, fine sound, with tweed HSC (brown lining) (SN:00411)
20U-11497
$2,200.00
|
SEAGULL S6+ CEDAR (2003)
13 Photos
EC except for a number of dings, a couple scratches and needs some work (dress frets, shim bass side of saddle, setup, etc., - sold AS-IS), D-size, 15-7/8" lower bout, gloss finished solid cedar top, dark stained cherry back and sides, 14-fret maple neck, 21-fret rosewood fingerboard with pearl dot inlays, 1-13/16" nut width, 24-7/8" scale length, rosewood bridge, cream-bound top and back, tortoise plastic pickguard, chrome tuners, made in Canada, with thermoplastic HSC (black lining) (SN:039532111)
20U-11645
$250.00
|
SEAGULL SC6CO (recent)
12 Photos
EC except for one ding on the lower treble bout, D-size, 15-7/8" lower bout, solid cedar top, cherry sides and back, 14 fret maple neck, 21 fret rosewood fingerboard with dot inlays, 1-3/4" nut width, 24.9" scale length, rosewood bridge, tortoise plastic pickguard, decorative soundhole rosette, chrome tuners, satin natural finish, brown body binding, built in Canada (SN:029396000199)
20U-11683
$350.00
|
STELLA BY HARMONY H942 (1970)
14 Photos
EC- except needs some work (dress frets, reglue bridge, setup, etc. - sold AS-IS), grand concert size, natural laminated top, light brown stained back and sides, painted white simulated binding, red and black decal for rosette, screwed on plastic tortoise pickguard, hardwood neck, 19 fret ebonized fretboard, pearloid dots, 3-on-a-plate tuners, one set appear original the other side replacement, white plastic knobs, ebonized hardwood bridge with white plastic pins, bone saddle, ~15-1/4" lower bout, 1-3/4" nut width, ~25-1/2" scale, exceptionally clean, made in USA, SSC (SN:557(8)H942)
20U-11641
$150.00
|
SUPERTONE "HAWAIIAN SCENE" (1930's?)
11 Photos
VGC except needs work (reset neck, fill fingerboard crack, level and dress frets, glue and cleat top cracks, reglue bridge, strings, setup, etc. - sold AS-IS), mahogany top, Hawaiian sunset beach scene with a girl, the girl has flowers in her hair and is wearing a lei, mahogany sides and back, each side has a Native Hawaiian woman playing a ukulele, 12-fret V-shaped mahogany neck, 18-fret fingerboard with white dot inlays, 1-7/8" nut width, ~24" scale length, slotted headstock, 3-on-a-plate tuners with black plastic buttons, body and soundhole are checkerboard bound, a wooden extension nut is installed, Supertone was the Sears and Roebuck brand until 1941, built by Harmony, very cool!
20U-10687
$400.00
|
TACOMA DBZ20 (2002)
12 Photos
VG-EC except for one repaired back crack, gloss natural finish, spruce top, Brazilian rosewood back and sides, 14-fret mahogany neck, all solid woods, 20-fret rosewood fingerboard with dot inlays, rosewood bridge, rosewood peghead overlay with ivoroid "TACOMA" logo, ivoroid-bound body and headstock, fancy wood marquetry top purfling, abalone soundhole rosette, clear pickguard, chrome tuners, 15-7/8" lower bout, 25.5" scale, 3-7/8" to 4-3/4" body depth, 1-3/4" nut width, built in the U.S.A., with black flat-lid OHSC (tan lining), on consignment - price reduced (SN:F0590170)
20U-11286
$1,250.00
|
TACOMA DF21 (2002)
12 Photos
EC+ with one small top ding, D-size, 15-7/8" lower bout, cherry sunburst finish, all solid woods, spruce top, flamed maple back and sides, 14-fret mahogany neck, tortoise plastic-bound 20-fret rosewood fingerboard, pearl "wave" inlays, 1-3/4" nut width, 25-1/2" scale, rosewood bridge, tortoise plastic-bound body, herringbone rosette and half-herringbone top trim, chrome tuners, onboard Fishman Prefix Plus pickup / preamp system, with OHSC (blue lining) (SN:FZ180220)
20U-11255
$795.00
|
TACOMA DM9 (2001)
12 Photos
EC except needs work (glue fingerboard extension, fill back of bridge, level and dress frets, strings, setup, etc. - sold AS-IS), D-size, 15-3/4" lower bout, natural satin finish, all solid woods, spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with abalone dot inlays, 1-3/4" nut width, 25-5/8" scale, rosewood bridge, tortoise plastic-bound body and fretboard, clear plastic pickguard, chrome tuners, 4-color herringbone soundhole rosette, with black OHSC (tan lining) (SN:E0990040)
20U-11575
$425.00
|
TACOMA DR-20 (2001)
11 Photos
EC except needs work (install new nut, level and dress frets, strings, setup, etc. - sold AS-IS), D-size, gloss natural finish, solid spruce top, solid rosewood back and sides, 14-fret mahogany neck, ivoroid-bound 20-fret rosewood fingerboard with abalone dot inlays, 1-13/16" nut width, 25-1/2" scale, rosewood bridge, abalone soundhole rosette, ivoroid-bound body, 4-color wood herringbone pattern top trim, chrome tuners, rosewood peghead overlay with vertical "Tacoma" logo (SN:E1220190)
20U-11571
$550.00
|
TACOMA EKK19C (2003)
13 Photos
EC+, LJ Series, 15-3/8" lower bout, rounded cutaway, natural gloss finish, solid figured koa top, back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard, 1-3/4" nut width, 25-5/8" scale length, ebony bridge, fancy wood rosette, tortoise plastic body binding, koa headstock overlay, black tuners, factory onboard Tacoma Miratone pickup / preamp, made in the USA, with OHSC (beige lining) (SN:G3210080)
20U-11429
$1,000.00
|
TAKAMINE EF340SC (recent)
13 Photos
EC except for a couple of small top dings, cutaway dreadnought body, gloss finish solid spruce top, solid mahogany back, laminated mahogany sides with natural satin finish, 20 fret mahogany neck with rosewood fretboard, rosewood bridge, 1-11/16" nut width, 25-1/2" scale, black bound top and back, b-w-b-w-b top binding, black and brown wood soundhole rossete, Takamine CT4B preamp system, chrome sealed back tuners, made in Japan, brown HSC with (green lining) (SN:05110572)
20U-11544
$850.00
|
TAYLOR 410 (2006)
13 Photos
EC+ except for one small ding on the heel of the neck, D-size, gloss natural finished spruce top, satin finished ovangkol back and sides, 14-fret mahogany neck, white-bound 20-fret ebony fingerboard, dot inlays, 1-3/4" nut width, 24-7/8" scale length, ebony bridge, tortoise plastic pickguard, white-bound body with b-w-b top purling, rosewood headstock overlay, chrome tuners, with black HSC (black lining) (SN:20060825032)
20U-11682
$925.00
|
TAYLOR 512-M (1996)
12 Photos
EC+, except for one small repaired side crack (treble side lower bout), grand concert size, 15" lower bout, gloss natural finish, mahogany top, mahogany back and sides, 14-fret mahogany neck, black-bound 20-fret ebony fingerboard, pearl slotted diamond inlays, 1-3/4" nut width, 25-1/2" scale, ebony bridge, tortoise plastic pickguard, abalone rosette, black-bound body, gold Grover Rotomatic tuners, with brown tolex OHSC (wine red lining) (SN:961004105)
20U-11475
$1,485.00
|
TAYLOR 710 (1988)
13 Photos
VG-EC with two repaired cracks on top at end of fingerboard, 16" lower bout, D-size, gloss natural finish, spruce top, rosewood sides and 3-piece back, 14-fret mahogany neck, black-bound 20-fret ebony fingerboard, abalone dot inlays, 1-23/32" nut width, 25-1/2" scale, ebony bridge, tortoise plastic pickguard, black-bound body, chrome Schaller tuners, with flat-lid HSC (gray lining) (SN:6052)
20U-11537
$1,400.00
|
TAYLOR 814-CE (2001)
14 Photos
EC- with a repair to the lower bout treble side and a minor finish crack on top, grand auditorium size, 15-7/8" lower bout, gloss natural finish, spruce top, rosewood back and sides, 14-fret mahogany neck, white-bound 20-fret ebony fingerboard, modern pearl inlays, 1-3/4" nut width, 25-1/2" scale, ebony bridge, tortoise plastic pickguard, abalone soundhole rosette, white-bound body, white-bound headstock with pearl "Taylor" inlay, gold Grover Rotomatic tuners, factory onboard Fishman Prefix Stereo Blender, blue Alvarez HSC (blue lining) (SN:20010227142)
20U-11110
$2,150.00
|
TAYLOR 815-C (1995)
12 Photos
EC-, 17-1/8" lower bout, jumbo-size, sharp cutaway, solid spruce top, solid rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with fancy pearl inlays, 1-11/16" nut width, 25-1/2" scale length, ebony bridge, tortoise plastic pickguard, abalone rosette, white-bound body, fingerboard and headstock, gold Grover Rotomatic tuners, active Fishman Matrix transducer installed, with brown OHSC (raspberry lining) (SN:951205130)
20U-11479
$2,500.00
|
TAYLOR K-14CE (1998)
14 Photos
EC-, several pick scratches around soundhole and one near binding on lower bass bout, grand auditorium size, rounded cutaway, solid cedar top, solid figured koa sides and 3-piece back, 14-fret mahogany neck, tortoise plastic-w-bound ebony fretboard with fancy agoya shell inlays, 1-3/4" nut width, 25-1/2" scale, ebony bridge, tortoise plastic-bound body with agoya shell top trim and soundhole rosette, ebony headstock overlay with pearl "Taylor" logo and fancy shell inlay, gold tuners, Taylor Prefix Blender pickup / preamp system, with brown tolex OHSC (burgundy lining) (SN:980408140)
20U-11473
$2,400.00
|
TAYLOR K-20CE (2003)
12 Photos
EC+, acoustic-electric, rounded cutaway, D-size, 15-7/8" lower bout, figured koa top, back and sides, gloss finish, 14 fret mahogany neck, tortoise plastic-white 20 fret ebony fingerboard with fancy inlays, ebony bridge, ebony peghead overlay with fancy inlay and "Taylor" logo, gold Grover Rotomatic tuners, tortoise plastic-w-b body and soundhole binding, Agoya shell top purfling and soundhole rosette, factory Taylor Expression pickup system, 25.5" scale, 1-3/4" nut width, 3-5/8" to 4-7/16" body depth, with brown OHSC (black lining) (SN:20030225155)
20U-11677
$2,650.00
|
TAYLOR XX-MC 20TH ANNIVERSARY (1994)
12 Photos
EC-, Limited Edition (#221 of 250), grand auditorium size, 15-3/4" lower bout, cedar top, mahogany back and sides, 14-fret mahogany neck, rosewood-bound 20-fret ebony fingerboard, fancy 20th Anniversary engraved pearl inlay from 12th to 18th fret, 1-25/32" nut width, 25-1/2" scale, ebony bridge, rosewood-bound body with turquoise back and side purfling, turquoise and abalone rosette, gold Grover Rotomatic tuners, active i-Beam pickup installed, on consignment, with brown OHSC (raspberry lining) (SN:940913124)
20U-11519
$2,300.00
|
TAYLOR XXX-RS 30TH ANNIVERSARY (2004)
12 Photos
EC+ with a finish crack at upper bout bass side, Limited Edition, #152 of 250, grand concert size, gloss natural finish, sunburst spruce top, Indian rosewood back and sides, 14-fret mahogany neck with slotted headstock, 20-fret ebony fingerboard with engraved pearl 30th Anniversary inlay, 1-3/4" nut width, 24-7/8" scale, ebony bridge, ivoroid-bound body, abalone rosette and top trim, ebony armrest installed, ebony overlays on front and back of headstock (pearl "Taylor" logo on front and floral inlay on back), engraved Waverly Sloane tuners with ivoroid buttons, inner label signed by Bob Taylor and Kurt Listug and dated 8/23/2004, with brown tolex OHSC (black lining) (SN:20040811108)
20U-11397
$2,600.00
|
VEGA A-25 (1960's)
13 Photos
EC- except for repaired top center seam, D-shape (but slightly smaller than D-size), 14-7/8" lower bout, gloss natural finish, all solid woods, X-braced spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with dot inlays, 1-23/32" nut width, 24-7/8" scale length, rosewood bridge, tortoise plastic pickguard, tortoise plastic bound body, bone nut and saddle installed, black peghead with gray "Vega" logo, Grover Sta-tite tuners with butterbean buttons, label reads "Vega Instrument Co. / NEEDHAM HEIGHTS, MASS. 02194", built in the U.S.A., with semi-HSC (yellow lining), "CHRIS LINGER" stenciled on lid (SN:12035)
20U-11113
$1,200.00
|
YAMAHA FG-411 (1997)
11 Photos
VG-EC, except needs some work (reglue bridge, dress frets, setup, etc. - sold AS-IS), D-size, laminated spruce top, mahogany back, sides and neck, rosewood fretboard with dot inlays, rosewood bridge, black pickguard, chrome tuners, black body binding, w-b top purfling, ~25" scale, 1-11/16" nut width, made in Taiwan (SN:40119708)
20U-11638
$115.00
|
Flat-top Guitars
 other vintage and used categories . . .
|
|
|
|
| 
