Ebony, vintage style with small silver colored height adjustment wheels. Stamped on one side "PAT'D JAN 18-21". Base has a high arch to fit newer Gibson, Flatiron, & Stiver mandolins with a minimum of carving. Precisely crafted for excellent intonation. The bridge base is 4 7/16" in length and 3/8" in width with the saddle adjusting holes being 2 1/4" apart on the centers. Made by Randy Wood.
MA22-SIL
.. list $50.00 ours
$45.00
MANDO BRIDGE
Photo
ebony w/chrome height adjustment wheels, for Gibson style archtop mandolins, compensated.
MA7
.. list $29.74 ours
$21.70
|
MANDO BRIDGE
Photo
ebony w/gold height adjustment wheels, for Gibson style archtop mandolins, compensated.
MA7G
$22.65
|
MANDOLIN BRIDGE
2 Photos
Rosewood for flattop mandolins. The bridge is 4-3/4" long. The base is 5/16" wide and the height is 1/2" at the center. Not Slotted.
MA4
.. list $7.50 ours
$5.05
|
MANDOLIN BRIDGE
Photo
EBONY for flattop. Has plastic insert across top. Bridge dimensions are 4-3/4"long, 5/16" wide at the base and 9/16" tall at the center. The plastic insert is 1 3/4" long. Not slotted.
MA5
.. list $15.95 ours
$11.95
|
MANDOLIN BRIDGE
Photo
ROSEWOOD ADJUSTABLE for archtop
MA6
$8.00
|
MANDOLIN BRIDGE, CUMBERLAND ACOUSTIC, 12" RADIUS
Photo
Ebony with radiused (curved) saddle for use with radiused fretboard. Compensated. Small gold height adjustment wheels.
CU72-GLD
$40.00
|
MANDOLIN BRIDGE, CUMBERLAND ACOUSTIC, 12" RADIUS
Photo
Ebony with radiused (curved) saddle for use with radiused fretboard. Compensated. Small nickel height adjustment wheels.
CU72-NKL
$40.00
|
MANDOLIN BRIDGE, CUMBERLAND ACOUSTIC, FLAT SADDLE
Photo
ebony with small nickel height adjustment wheels, compensated. These are built to the exact specs used currently by Gibson.
CU71-NKL
$40.00
|
VINTAGE LOW-ARCH MANDOLIN BRIDGE
Photo
Ebony with small gold colored height adjustment wheels. Base has a low arch. Fits older Gibsons (and others both new & old) with a minimum of carving. Stamped "PAT'D JAN 18-21" on one side. Precisely crafted for excellent intonation. The length of the bridge base is 4 7/16" by a width of 3/8" and the saddle adjuster holes are 2 1/4" apart on the centers. Made by Randy Wood.
MA21-GLD
.. list $50.00 ours
$45.00
|
VINTAGE LOW-ARCH MANDOLIN BRIDGE
Photo
Ebony with small silver colored height adjustment wheels. Base has a low arch. Fits older Gibsons (and others both new & old) with a minimum of carving. Stamped "PAT'D JAN 18-21" on one side. Precisely crafted for excellent intonation. The length of the bridge base is 4 7/16" by a width of 3/8" and the saddle adjuster holes are 2 1/4" apart on the centers. Made by Randy Wood.
MA21-SIL
.. list $50.00 ours
$45.00
|
VINTAGE STYLE MANDOLA BRIDGE
Photo
Ebony, small, silver colored height adjustment wheels, base arched to fit older Gibson mandolas with a minimum of carving, stamped "PAT'D JAN 18-21" on one side. Precisely crafted for excellent intonation - compensation is designed for mandola strings. NOTE - Now with a larger base. (It used to have the same base as the mandolin bridge.) The bridge base is now 4 7/8" in length and 1/2" wide, with the saddle adjuster holes being 2 1/4" apart on the centers. Made by Randy Wood.
MA23-SIL
.. list $75.00 ours
$65.00
|
WEBER BREKKE BRIDGE FOR ARCHTOP MANDOLINS
Photo
for top-to-string distance of 22/32"-28/32". Unique adjustable ebony bridge utilizes sliding wedges underneath a removable compensated saddle piece. Each bridge comes w/ two different saddle pieces to allow for the best fit, especially during seasonal humidity fluctuations. Base must be properly fit to the top. Professional installation is highly recommended. This design more effectively transmits string vibration into the instrument. May be retrofit to most archtop mandolins. Adjusting tool included.
WABB-MEDIUM
.. list $60.00 ours
Inquire for Price
|
get an email price quote
WEBER BREKKE BRIDGE FOR ARCHTOP MANDOLINS
Photo
for top-to-string distance of 24/32"-30/32". Unique adjustable ebony bridge utilizes sliding wedges underneath a removable compensated saddle piece. Each bridge comes w/ two different saddle pieces to allow for the best fit, especially during seasonal humidity fluctuations. Base must be properly fit to the top. Professional installation is highly recommended. This design more effectively transmits string vibration into the instrument. May be retrofit to most archtop mandolins. Adjusting tool included.
WABB-TALL
.. list $60.00 ours
Inquire for Price
|
get an email price quote
WEBER TRADITIONAL BREKKE MANDOLIN BRIDGE
Photo
FLAT SADDLE & GOLD ADJUSTER WHEELS - Nice, innovative variation on the traditional adjustable bridge for arched top mandolins. This bridge has a typical ebony base, but with a continuous wide-U shaped metal support, with the "legs" of the U threaded & with adjusting nut/support washers on the "legs." The ebony saddle piece wedges on the crossbar of the "wide-U" thus increasing the strength of the saddle piece greatly and eliminating the sagging-saddle-syndrome. Bridge base needs to be fitted to the top and the saddle piece needs to be slotted. Professional installation recommended.
WTBB1-GOLD
$95.00
|
WEBER TRADITIONAL BREKKE MANDOLIN BRIDGE
Photo
FLAT SADDLE & NICKEL ADJUSTER WHEELS - Nice, innovative variation on the traditional adjustable bridge for arched top mandolins. This bridge has a typical ebony base, but with a continuous wide-U shaped metal support, with the "legs" of the U threaded & with adjusting nut/support washers on the "legs." The ebony saddle piece wedges on the crossbar of the "wide-U" thus increasing the strength of the saddle piece greatly and eliminating the sagging-saddle-syndrome. Bridge base needs to be fitted to the top and the saddle piece needs to be slotted. Professional installation recommended.
WTBB1-NICKEL
$95.00
|
Mandolin Parts
GROVER A-STYLE MANDOLIN TUNERS, GOLD FINISH WITH WITH PEARLOID BUTTONS
Photo
18:1 gear ratio, 29/32" spacing, screws included.
TK7382G
.. list $78.00 ours
$60.00
|
GROVER A-STYLE MANDOLIN TUNERS, NICKEL FINISH WITH WITH PEARLOID BUTTONS
18:1 gear ratio, 29/32" spacing, screws included.
out-of-stock, more coming soon -- normally ships within 7-14 days
TK7382N
.. list $68.00 ours
$52.00
|
MANDO TUNERS
Photo
A MODEL, Inexpensive, with glued on plastic buttons, stringposts spaced 29/32" apart on center, include screws and bushings.
MA1
$12.75
|
MANDOLIN TUNER BUTTON, ivoroid, round
Photo
Fits 4.3mm round shaft (Schaller). Attach with superglue.
MB1
$2.35
|
MANDOLIN TUNER BUTTON, ivoroid, round
Photo
Fits 2.9mm square shaft (Gotoh). Attach with screw (not included).
MB2
$2.95
|
SCHALLER A-MANDO TUNERS
Photo
string post spaced 29/32" apart gold plated screws included. Very smooth operating machine with pearloid keys.
MANG3
.. list $100.00 ours
$75.00
|
SCHALLER A-MANDO TUNERS
Photo
nickel with glued-on pearloid buttons; stringposts are spaced 29/32" on center. Quality construction, bushings & screws included.
MANN13
.. list $80.00 ours
$60.00
|
SCHALLER F-MANDO TUNERS
Photo
gold with glued-on pearloid buttons; stringposts are spaced 29/32" on center; gear is above worm. Quality construction, bushings & screws included. NOTE: THESE ARE REVERSE GEARS. TWISTING THE BUTTONS COUNTER-CLOCKWISE WILL DE-TUNE THE STRINGS.)
on order, expected arrival date unknown
MANG4
.. list $100.00 ours
$75.00
|
SCHALLER F-MANDO TUNERS
Photo
nickel with glued-on pearloid buttons; stringposts are spaced 29/32" on center; gear is above the worm. Quality construction, bushings & screws included. NOTE: THESE ARE "REVERSE" GEARS. (TWISTING THE BUTTONS COUNTERCLOCKWISE WILL DE-TUNE THE STRINGS.)
MANN14
.. list $80.00 ours
$60.00
|
Mandolin Parts
ALLEN AR-2 MANDOLIN TAILPIECE
Photo
A finely cast & plated bronze, Monteleone-inspired tailpiece that will retrofit to most mandolins. Topside hooks allow for easy string changes and accept typical loop-end strings.
AAR2
EBONY MANDOLIN FRETBOARD
Photo
Slotted, 13 7/8" scale, 3/16" X 1 15/16" X 12", for A or F model.
MA76
$26.50
|
EBONY MANDOLIN PICKGUARD, A-MODEL, BOUND
Photo
Small, ivoroid-bound ebony pickguard. Attaches to fretboard with two small pins (you drill holes), no side-mounted bracket. Approximately 5 1/2" long at fretboard edge X 2 1/8" at widest point.
CU86
.. list $135.00 ours
$125.00
|
EBONY MANDOLIN PICKGUARD, F-MODEL, BOUND
Photo
Small, ivoroid-bound ebony pickguard. Attaches to fretboard with two small pins (you drill holes), no side-mounted bracket. Approximately 5 1/16" long at fretboard edge X 2 1/4" wide at widest point.
CU87
.. list $135.00 ours
$125.00
|
GROVER A-STYLE MANDOLIN TUNERS, GOLD FINISH WITH WITH PEARLOID BUTTONS
Photo
18:1 gear ratio, 29/32" spacing, screws included.
TK7382G
.. list $78.00 ours
$60.00
|
GROVER A-STYLE MANDOLIN TUNERS, NICKEL FINISH WITH WITH PEARLOID BUTTONS
18:1 gear ratio, 29/32" spacing, screws included.
out-of-stock, more coming soon -- normally ships within 7-14 days
TK7382N
.. list $68.00 ours
$52.00
|
HIGH-PROFILE MANDOLIN BRIDGE
Photo
Ebony, vintage style with small silver colored height adjustment wheels. Stamped on one side "PAT'D JAN 18-21". Base has a high arch to fit newer Gibson, Flatiron, & Stiver mandolins with a minimum of carving. Precisely crafted for excellent intonation. The bridge base is 4 7/16" in length and 3/8" in width with the saddle adjusting holes being 2 1/4" apart on the centers. Made by Randy Wood.
MA22-SIL
.. list $50.00 ours
$45.00
|
JAMES MANDOLIN TAILPIECE
Photo
This very innovative, "classic" looking tailpiece features a hinged cover with a concealed latch. To facilitate re-stringing, the cover flips up allowing easy access to string ends, then flips down to hold string ends in place leaving both hands free. Strings and cover are fully dampened against vibration. Available with either a silver or gold plated Florentine finish with decorative " stitch" engraved border. The screw pattern is designed to retrofit to most mandolins.
JMT1
MANDO BRIDGE
Photo
ebony w/chrome height adjustment wheels, for Gibson style archtop mandolins, compensated.
MA7
.. list $29.74 ours
$21.70
|
MANDO BRIDGE
Photo
ebony w/gold height adjustment wheels, for Gibson style archtop mandolins, compensated.
MA7G
$22.65
|
MANDO STRING NUT
Photo
PLASTIC, SLOTTED. 1 1/8" X 9/32" X 3/16" thick.
on order, expected arrival date unknown
BN95
.. list $3.00 ours
$2.50
|
MANDO TUNERS
Photo
A MODEL, Inexpensive, with glued on plastic buttons, stringposts spaced 29/32" apart on center, include screws and bushings.
MA1
$12.75
|
MANDOLIN BRIDGE
2 Photos
Rosewood for flattop mandolins. The bridge is 4-3/4" long. The base is 5/16" wide and the height is 1/2" at the center. Not Slotted.
MA4
.. list $7.50 ours
$5.05
|
MANDOLIN BRIDGE
Photo
EBONY for flattop. Has plastic insert across top. Bridge dimensions are 4-3/4"long, 5/16" wide at the base and 9/16" tall at the center. The plastic insert is 1 3/4" long. Not slotted.
MA5
.. list $15.95 ours
$11.95
|
MANDOLIN BRIDGE
Photo
ROSEWOOD ADJUSTABLE for archtop
MA6
$8.00
|
MANDOLIN BRIDGE, CUMBERLAND ACOUSTIC, 12" RADIUS
Photo
Ebony with radiused (curved) saddle for use with radiused fretboard. Compensated. Small gold height adjustment wheels.
CU72-GLD
$40.00
|
MANDOLIN BRIDGE, CUMBERLAND ACOUSTIC, 12" RADIUS
Photo
Ebony with radiused (curved) saddle for use with radiused fretboard. Compensated. Small nickel height adjustment wheels.
CU72-NKL
$40.00
|
MANDOLIN BRIDGE, CUMBERLAND ACOUSTIC, FLAT SADDLE
Photo
ebony with small nickel height adjustment wheels, compensated. These are built to the exact specs used currently by Gibson.
CU71-NKL
$40.00
|
MANDOLIN TAILPIECE
Photo
Gold plated, traditional style with removable cover.
MA11G
$9.25
|
MANDOLIN TAILPIECE
Photo
Nickel plated, traditional style with removable cover.
MA11N
$7.45
|
MANDOLIN TUNER BUTTON, ivoroid, round
Photo
Fits 4.3mm round shaft (Schaller). Attach with superglue.
MB1
$2.35
|
MANDOLIN TUNER BUTTON, ivoroid, round
Photo
Fits 2.9mm square shaft (Gotoh). Attach with screw (not included).
MB2
$2.95
|
MICHAEL KELLY CAST MANDOLIN TAILPIECE
Photo
.Nicely designed 1-piece heavy cast tailpiece from the folks at Michael Kelly mandolins. Retrofits to most mandolins or mandolas with the classic 3-hole screw pattern. Allows for easy string changes. The additional weight also increases the sustain of the instrument. Available either gold or chrome plated.
MKT1
ORRICO MANDOLIN TAILPIECE
Photo
A very nicely made, heavy cast solid bronze tailpiece with elaborate art noveau design Florentine ornamentation. This tailpiece will replace most traditional 3-hole screw pattern mandolin tailpieces. Available in polished, unplated bronze, silver-plated bronze or nickel-plated bronze.
OMT1
RESONATOR MANDOLIN TAILPIECE
Photo
Nickel plated tailpiece for resonator mandolins. These are the same tailpieces that are used on the Johnson resonator mandolins.
on order, expected arrival date unknown
MA998TP
Inquire for Price
|
get an email price quote
SCALLOP SHELL MANDOLIN TAILPIECE
3 Photos
Coverless tailpiece for A-style or roundback mandolin, hooks hold loop-end strings. Nickel-plated brass with hole for endpin, 3 attaching screws included.
MA8
$13.75
|
SCHALLER A-MANDO TUNERS
Photo
string post spaced 29/32" apart gold plated screws included. Very smooth operating machine with pearloid keys.
MANG3
.. list $100.00 ours
$75.00
|
SCHALLER A-MANDO TUNERS
Photo
nickel with glued-on pearloid buttons; stringposts are spaced 29/32" on center. Quality construction, bushings & screws included.
MANN13
.. list $80.00 ours
$60.00
|
SCHALLER F-MANDO TUNERS
Photo
gold with glued-on pearloid buttons; stringposts are spaced 29/32" on center; gear is above worm. Quality construction, bushings & screws included. NOTE: THESE ARE REVERSE GEARS. TWISTING THE BUTTONS COUNTER-CLOCKWISE WILL DE-TUNE THE STRINGS.)
on order, expected arrival date unknown
MANG4
.. list $100.00 ours
$75.00
|
SCHALLER F-MANDO TUNERS
Photo
nickel with glued-on pearloid buttons; stringposts are spaced 29/32" on center; gear is above the worm. Quality construction, bushings & screws included. NOTE: THESE ARE "REVERSE" GEARS. (TWISTING THE BUTTONS COUNTERCLOCKWISE WILL DE-TUNE THE STRINGS.)
MANN14
.. list $80.00 ours
$60.00
|
TORTOISE MANDOLIN PICKGUARD, A-MODEL, BOUND
Photo
Small, ivoroid-bound tortoise pickguard. Attaches to fretboard with two small pins (you drill holes). Approximately 5 1/2" long at fretboard edge X 2 1/8" at widest point.
CU83
$100.00
|
TORTOISE MANDOLIN PICKGUARD, F-MODEL, BOUND
Photo
Small, ivoroid-bound tortoise pickguard. Attaches to fretboard with two small pins (you drill holes), no side-mounted bracket. Approximately 5 1/16" long at fretboard edge X 2 1/4" wide at widest point.
CU84
$110.00
|
TORTOISE MANDOLIN PICKGUARD, F-MODEL, LARGE
5 Photos
Large F-5 style ivoroid-bound tortoise pickguard. Attaches with 2 pins in side of fingerboard and a bracket mounted on the body. Nickel hardware. Approximately 5 9/16" long at fretboard edge X 2 7/8" at widest point.
CU85
$135.00
|
VINTAGE LOW-ARCH MANDOLIN BRIDGE
Photo
Ebony with small gold colored height adjustment wheels. Base has a low arch. Fits older Gibsons (and others both new & old) with a minimum of carving. Stamped "PAT'D JAN 18-21" on one side. Precisely crafted for excellent intonation. The length of the bridge base is 4 7/16" by a width of 3/8" and the saddle adjuster holes are 2 1/4" apart on the centers. Made by Randy Wood.
MA21-GLD
.. list $50.00 ours
$45.00
|
VINTAGE LOW-ARCH MANDOLIN BRIDGE
Photo
Ebony with small silver colored height adjustment wheels. Base has a low arch. Fits older Gibsons (and others both new & old) with a minimum of carving. Stamped "PAT'D JAN 18-21" on one side. Precisely crafted for excellent intonation. The length of the bridge base is 4 7/16" by a width of 3/8" and the saddle adjuster holes are 2 1/4" apart on the centers. Made by Randy Wood.
MA21-SIL
.. list $50.00 ours
$45.00
|
VINTAGE STYLE MANDOLA BRIDGE
Photo
Ebony, small, silver colored height adjustment wheels, base arched to fit older Gibson mandolas with a minimum of carving, stamped "PAT'D JAN 18-21" on one side. Precisely crafted for excellent intonation - compensation is designed for mandola strings. NOTE - Now with a larger base. (It used to have the same base as the mandolin bridge.) The bridge base is now 4 7/8" in length and 1/2" wide, with the saddle adjuster holes being 2 1/4" apart on the centers. Made by Randy Wood.
MA23-SIL
.. list $75.00 ours
$65.00
|
WEBER BREKKE BRIDGE FOR ARCHTOP MANDOLINS
Photo
for top-to-string distance of 22/32"-28/32". Unique adjustable ebony bridge utilizes sliding wedges underneath a removable compensated saddle piece. Each bridge comes w/ two different saddle pieces to allow for the best fit, especially during seasonal humidity fluctuations. Base must be properly fit to the top. Professional installation is highly recommended. This design more effectively transmits string vibration into the instrument. May be retrofit to most archtop mandolins. Adjusting tool included.
WABB-MEDIUM
.. list $60.00 ours
Inquire for Price
|
get an email price quote
WEBER BREKKE BRIDGE FOR ARCHTOP MANDOLINS
Photo
for top-to-string distance of 24/32"-30/32". Unique adjustable ebony bridge utilizes sliding wedges underneath a removable compensated saddle piece. Each bridge comes w/ two different saddle pieces to allow for the best fit, especially during seasonal humidity fluctuations. Base must be properly fit to the top. Professional installation is highly recommended. This design more effectively transmits string vibration into the instrument. May be retrofit to most archtop mandolins. Adjusting tool included.
WABB-TALL
.. list $60.00 ours
Inquire for Price
|
get an email price quote
WEBER MANDOLIN ARMREST/TAILPIECE
Photo
Vern Brekke of Weber Mandolins is a very innovative designer. He has combined a traditional 3-hole pattern mandolin tailpiece flange with an ebony armrest into one integral part. The armrest floats slightly above the top of the mandolin with one contact point (there is a felt pad on the underside), so as not to dampen the sound of your instrument. The tailpiece part is heavy cast metal, plated in either gold or nickel. The armrest is of fine ebony and shaped to match the body arc of either a traditional A or F body, or the more rounded Celtic A. A great design very well executed. All of these are available on a special order basis only. We require a 50% deposit and delivery typically takes about a month.
WTA
WEBER MANDOLIN TAILPIECE
2 Photos
"Universal" design retrofits to most mandolins. Cast in heavy bronze and then gold plated. Successfully captures the visual appeal of a traditional tailpiece and greatly improves on the function. A welcome addition to the "mandolin realm."
WMT1-GOLD
.. list $100.00 ours
Inquire for Price
|
get an email price quote
WEBER MANDOLIN TAILPIECE
3 Photos
"Universal" design retrofits to most mandolins. Cast in heavy bronze and then nickel plated. Successfully captures the visual appeal of a traditional tailpiece and greatly improves on the function. A welcome addition to the "mandolin realm."
WMT1-NICKEL
.. list $87.00 ours
Inquire for Price
|
get an email price quote
WEBER TRADITIONAL BREKKE MANDOLIN BRIDGE
Photo
FLAT SADDLE & GOLD ADJUSTER WHEELS - Nice, innovative variation on the traditional adjustable bridge for arched top mandolins. This bridge has a typical ebony base, but with a continuous wide-U shaped metal support, with the "legs" of the U threaded & with adjusting nut/support washers on the "legs." The ebony saddle piece wedges on the crossbar of the "wide-U" thus increasing the strength of the saddle piece greatly and eliminating the sagging-saddle-syndrome. Bridge base needs to be fitted to the top and the saddle piece needs to be slotted. Professional installation recommended.
WTBB1-GOLD
$95.00
|
WEBER TRADITIONAL BREKKE MANDOLIN BRIDGE
Photo
FLAT SADDLE & NICKEL ADJUSTER WHEELS - Nice, innovative variation on the traditional adjustable bridge for arched top mandolins. This bridge has a typical ebony base, but with a continuous wide-U shaped metal support, with the "legs" of the U threaded & with adjusting nut/support washers on the "legs." The ebony saddle piece wedges on the crossbar of the "wide-U" thus increasing the strength of the saddle piece greatly and eliminating the sagging-saddle-syndrome. Bridge base needs to be fitted to the top and the saddle piece needs to be slotted. Professional installation recommended.
WTBB1-NICKEL
$95.00
|
WEBER WOOD NYMPH
2 Photos
An elegant and innovative design fron Vern Brekke at Weber mandolins, this small device suppresses unwanted harmonics generated by the strings between the bridge and the tailpiece of a mandolin, installs easily, very effective, especially useful for recording.
WWN1
.. list $18.00 ours
Inquire for Price
|
get an email price quote
Mandolin Parts
ALLEN AR-2 MANDOLIN TAILPIECE
Photo
A finely cast & plated bronze, Monteleone-inspired tailpiece that will retrofit to most mandolins. Topside hooks allow for easy string changes and accept typical loop-end strings.
AAR2
ALLEN AR-2 MANDOLIN TAILPIECE
Photo
A finely cast gold-plated bronze, Monteleone-inspired tailpiece that will retrofit to most mandolins. Topside hooks allow for easy string changes and accept typical loop-end strings.
gold ..
AAR2-GOLD
.. list $104.00 ours
$99.00
|
ALLEN AR-2 MANDOLIN TAILPIECE
Photo
A finely cast nickel-plated bronze, Monteleone-inspired tailpiece that will retrofit to most mandolins. Topside hooks allow for easy string changes and accept typical loop-end strings.
nickel ..
AAR2-NICKEL
.. list $99.00 ours
$95.00
|
JAMES MANDOLIN TAILPIECE
Photo
This very innovative, "classic" looking tailpiece features a hinged cover with a concealed latch. To facilitate re-stringing, the cover flips up allowing easy access to string ends, then flips down to hold string ends in place leaving both hands free. Strings and cover are fully dampened against vibration. Available with either a silver or gold plated Florentine finish with decorative " stitch" engraved border. The screw pattern is designed to retrofit to most mandolins.
JMT1
JAMES MANDOLIN TAILPIECE
4 Photos
This very innovative, "classic" looking design features a hinged cover with concealed latch. For ease of re-stringing, the cover flips up allowing easy access to string ends, then flips down to hold string ends in place leaving both hands free. Strings and cover are fully dampened against vibration. Gold plated Florentine finish with decorative "stitch" engraved border.
gold ..
JMT1-GOLD
$150.00
|
JAMES MANDOLIN TAILPIECE
4 Photos
This very innovative, "classic" looking design features a hinged cover with concealed latch. For ease of re-stringing, the cover flips up allowing easy access to string ends, then flips down to hold string ends in place leaving both hands free. Strings and cover are fully dampened against vibration. Silver plated Florentine finish with decorative "stitch" engraved border.
silver ..
JMT1-SILVER
$150.00
|
MANDOLIN TAILPIECE
Photo
Gold plated, traditional style with removable cover.
MA11G
$9.25
|
MANDOLIN TAILPIECE
Photo
Nickel plated, traditional style with removable cover.
MA11N
$7.45
|
MICHAEL KELLY CAST MANDOLIN TAILPIECE
Photo
.Nicely designed 1-piece heavy cast tailpiece from the folks at Michael Kelly mandolins. Retrofits to most mandolins or mandolas with the classic 3-hole screw pattern. Allows for easy string changes. The additional weight also increases the sustain of the instrument. Available either gold or chrome plated.
MKT1
MICHAEL KELLY CAST MANDOLIN TAILPIECE
Photo
Unique design. Works for mandolas also.
chrome ..
MKT1-CHROME
$65.00
|
MICHAEL KELLY CAST MANDOLIN TAILPIECE
Photo
Unique design. Works for mandolas also.
gold ..
MKT1-GOLD
$70.00
|
ORRICO MANDOLIN TAILPIECE
Photo
A very nicely made, heavy cast solid bronze tailpiece with elaborate art noveau design Florentine ornamentation. This tailpiece will replace most traditional 3-hole screw pattern mandolin tailpieces. Available in polished, unplated bronze, silver-plated bronze or nickel-plated bronze.
OMT1
ORRICO MANDOLIN TAILPIECE
2 Photos
Heavy cast solid bronze tailpiece, elaborate art noveau design with Florentine ornamentation, replaces most traditional 3-hole screw pattern mandolin tailpieces.
unplated bronze ..
OMT1-BRONZE
$80.00
|
ORRICO MANDOLIN TAILPIECE
Photo
Heavy nickel-plated cast solid bronze tailpiece, elaborate art noveau design with Florentine ornamentation, replaces most traditional 3-hole screw pattern mandolin tailpieces
nickel plated bronze ..
OMT1-NICKEL
$90.00
|
ORRICO MANDOLIN TAILPIECE
3 Photos
Heavy silver-plated cast solid bronze tailpiece, elaborate art noveau design with Florentine ornamentation, replaces most traditional 3-hole screw pattern mandolin tailpieces
silver plated bronze ..
OMT1-SILVER
$90.00
|
RESONATOR MANDOLIN TAILPIECE
Photo
Nickel plated tailpiece for resonator mandolins. These are the same tailpieces that are used on the Johnson resonator mandolins.
on order, expected arrival date unknown
MA998TP
Inquire for Price
|
get an email price quote
SCALLOP SHELL MANDOLIN TAILPIECE
3 Photos
Coverless tailpiece for A-style or roundback mandolin, hooks hold loop-end strings. Nickel-plated brass with hole for endpin, 3 attaching screws included.
MA8
$13.75
|
WEBER MANDOLIN ARMREST/TAILPIECE
Photo
Vern Brekke of Weber Mandolins is a very innovative designer. He has combined a traditional 3-hole pattern mandolin tailpiece flange with an ebony armrest into one integral part. The armrest floats slightly above the top of the mandolin with one contact point (there is a felt pad on the underside), so as not to dampen the sound of your instrument. The tailpiece part is heavy cast metal, plated in either gold or nickel. The armrest is of fine ebony and shaped to match the body arc of either a traditional A or F body, or the more rounded Celtic A. A great design very well executed. All of these are available on a special order basis only. We require a 50% deposit and delivery typically takes about a month.
WTA
WEBER MANDOLIN ARMREST/TAILPIECE
Photo
Shaped to fit most celtic A-style bodies (such as the Weber Hyalite, Bridger & Aspen), integral design combines a gold Weber cast tailpiece with a floating wooden armrest. Does not dampen the sound of the mandolin.
celtic A-body, gold ..
WTA-CELT-A-GLD
.. list $200.00 ours
$180.00
|
WEBER MANDOLIN ARMREST/TAILPIECE
Photo
Shaped to fit most celtic A-style bodies (such as the Weber Hyalite, Bridger & Aspen), integral design combines a nickel Weber cast tailpiece with a floating wooden armrest. Does not dampen the sound of the mandolin.
available as a special order -- normally ships within 30-120 days
celtic A-body, nickel ..
WTA-CELT-A-NKL
.. list $180.00 ours
$162.00
|
WEBER MANDOLIN ARMREST/TAILPIECE
Photo
Shaped to fit most traditional A-style bodies, integral design combines a gold Weber cast tailpiece with a floating wooden armrest. Does not dampen the sound of the mandolin.
available as a special order -- normally ships within 30-120 days
traditional A-body, gold ..
WTA-TRAD-A-GLD
.. list $200.00 ours
$180.00
|
WEBER MANDOLIN ARMREST/TAILPIECE
Photo
Shaped to fit most traditional A-style bodies, integral design combines a nickel Weber cast tailpiece with a floating wooden armrest. Does not dampen the sound of the mandolin.
available as a special order -- normally ships within 30-120 days
traditional A-body, nickel ..
WTA-TRAD-A-NKL
.. list $180.00 ours
$162.00
|
WEBER MANDOLIN ARMREST/TAILPIECE
Photo
Shaped to fit most traditional F-style bodies, integral design combines a gold Weber cast tailpiece with a floating wooden armrest. Does not dampen the sound of the mandolin.
available as a special order -- normally ships within 30-120 days
traditional F-body, gold ..
WTA-TRAD-F-GLD
.. list $200.00 ours
$180.00
|
WEBER MANDOLIN ARMREST/TAILPIECE
Photo
Shaped to fit most traditional F-style bodies, integral design combines a nickel Weber cast tailpiece with a floating wooden armrest. Does not dampen the sound of the mandolin.
available as a special order -- normally ships within 30-120 days
traditional F-body, nickel ..
WTA-TRAD-F-NKL
.. list $180.00 ours
$162.00
|
WEBER MANDOLIN TAILPIECE
2 Photos
"Universal" design retrofits to most mandolins. Cast in heavy bronze and then gold plated. Successfully captures the visual appeal of a traditional tailpiece and greatly improves on the function. A welcome addition to the "mandolin realm."
WMT1-GOLD
.. list $100.00 ours
Inquire for Price
|
get an email price quote
WEBER MANDOLIN TAILPIECE
3 Photos
"Universal" design retrofits to most mandolins. Cast in heavy bronze and then nickel plated. Successfully captures the visual appeal of a traditional tailpiece and greatly improves on the function. A welcome addition to the "mandolin realm."
WMT1-NICKEL
.. list $87.00 ours
Inquire for Price
|
get an email price quote
WEBER WOOD NYMPH
2 Photos
An elegant and innovative design fron Vern Brekke at Weber mandolins, this small device suppresses unwanted harmonics generated by the strings between the bridge and the tailpiece of a mandolin, installs easily, very effective, especially useful for recording.
WWN1
.. list $18.00 ours
Inquire for Price
|
get an email price quote
Mandolin Parts
EBONY MANDOLIN FRETBOARD
Photo
Slotted, 13 7/8" scale, 3/16" X 1 15/16" X 12", for A or F model.
MA76
$26.50
|
EBONY MANDOLIN PICKGUARD, A-MODEL, BOUND
Photo
Small, ivoroid-bound ebony pickguard. Attaches to fretboard with two small pins (you drill holes), no side-mounted bracket. Approximately 5 1/2" long at fretboard edge X 2 1/8" at widest point.
CU86
.. list $135.00 ours
$125.00
|
EBONY MANDOLIN PICKGUARD, F-MODEL, BOUND
Photo
Small, ivoroid-bound ebony pickguard. Attaches to fretboard with two small pins (you drill holes), no side-mounted bracket. Approximately 5 1/16" long at fretboard edge X 2 1/4" wide at widest point.
CU87
.. list $135.00 ours
$125.00
|
MANDO STRING NUT
Photo
PLASTIC, SLOTTED. 1 1/8" X 9/32" X 3/16" thick.
on order, expected arrival date unknown
BN95
.. list $3.00 ours
$2.50
|
TORTOISE MANDOLIN PICKGUARD, A-MODEL, BOUND
Photo
Small, ivoroid-bound tortoise pickguard. Attaches to fretboard with two small pins (you drill holes). Approximately 5 1/2" long at fretboard edge X 2 1/8" at widest point.
CU83
$100.00
|
TORTOISE MANDOLIN PICKGUARD, F-MODEL, BOUND
Photo
Small, ivoroid-bound tortoise pickguard. Attaches to fretboard with two small pins (you drill holes), no side-mounted bracket. Approximately 5 1/16" long at fretboard edge X 2 1/4" wide at widest point.
CU84
$110.00
|
TORTOISE MANDOLIN PICKGUARD, F-MODEL, LARGE
5 Photos
Large F-5 style ivoroid-bound tortoise pickguard. Attaches with 2 pins in side of fingerboard and a bracket mounted on the body. Nickel hardware. Approximately 5 9/16" long at fretboard edge X 2 7/8" at widest point.
CU85
$135.00
|
Mandolin Parts
| 
