Padded nylon gig bag with shoulder strap, fits 1/2 size guitars. 35" x 12" x 4".
AGC1/2
.. list $29.00 ours
$24.50
4/4 VIOLIN CASE
2 Photos
MOLDED - shaped violin case made from molded thermoplastic with plush interior. Holds 2 bows in top and has 2 small accessory boxes.
on order, expected arrival date unknown
VCIN
$60.00
|
ACCESS PFX1 MUSICIANS CARRY-ALL
Photo
This extremely rugged gear bag will carry up to 50 pounds of gear and keep it all organized. Made of premium grade 1680-denier nylon, there are 3 internal compartments which can be configured as best suits your needs, 4 external pouches, zippered closures for all compartments, extra heavy duty handle, and removable padded shoulder strap. Pack all your "stuff" the way you want it and head for the gig. Very well done.
PFX1
.. list $119.00 ours
$89.00
|
ACCESS STAGE-FIVE GUITAR GIGBAG
The Access Stage-Five series gigbags are amongst the finest made. An originator of "hybrid" gigbags, Access combines a high level of protection, fabulous portability and lots of storage space for your gear. The "hybrid" designation comes from the combination of an extremely durable 1680 denier black nylon bag outer shell with a light, thin, impact & puncture resistant Correx liner. The padded interior has a short nap plush lining with leather wear pads at key points and adjustable neck yoke. Other features include dual adjustable sling style straps and a large divided storage compartment. If you are a gigbag person, this bag will impress you. Available in four sizes. We are pleased to offer them all.
AGB5
ACCESS STAGE-ONE "FATBOY / LP-STYLE" GUITAR CASE
Designed with extra depth to fit a wide range of single-cut solid body electric guitars. The strong rectangular wooden shell has a rugged black exterior covering, plush padded interior, accessory compartment, strong latches and sturdy handle. Imported from Asia.
on order, expected arrival date unknown
AGCS1-LP
.. list $129.00 ours
$95.00
|
ACCESS STAGE-ONE BANJO GIGBAG
Durable black nylon exterior, padded, strong handle and zipper, large accessory pocket, shaped profile, large enough for a resonator banjo, but will also work with openback banjos. Imported from Asia.
ABB1
.. list $69.00 ours
$49.00
|
ACCESS STAGE-ONE MANDOLIN GIGBAG
Durable black nylon exterior, well padded, strong handle and zipper, large accessory pocket, symmetrical shaped profile fits either A or F model mandolins, left-or-right-handed, imported from Asia.
AMB1
.. list $65.00 ours
$46.00
|
ACCESS STAGE-THREE BANJO GIGBAG
Heavy-duty 600 denier ballistic-style black nylon exterior, thick closed-cell foam padding, nylon wrap-around web handles, heavy-duty zippers, large accessory pocket, shaped profile, large enough for a resonator banjo, but will also work with openback banjos. Imported from Asia.
ABB3
.. list $119.00 ours
$85.00
|
ACCESS STAGE-THREE MANDOLIN CASE
Universal fit design holds F-style or A-style mandolins in either right-handed or left-handed configurations. The strong rectangular wooden shell has a rugged black exterior covering, plush padded interior, accessory compartment, strong latches and sturdy comfortable handle. No-nonsense, well designed case. Imported from Asia.
AMCS3
.. list $179.00 ours
$129.00
|
ACCESS STAGE-THREE MANDOLIN GIGBAG
Heavy-duty 600 denier ballistic-style black nylon exterior, thick closed-cell foam padding, nylon wrap-around web handles, heavy-duty zippers, large accessory pocket, symmetrical shaped profile fits A & F-models, right-or-left-handed. Imported from Asia.
AMB3
.. list $109.00 ours
$75.00
|
ACCORDION CASE
2 Photos
For 2-row button accordions. Plush lined, fits Hohner models. Inside dimensions are 13" X 11 1/2" X 8".
ACC-2ROW
.. list $140.00 ours
$115.00
|
AMERICAN VINTAGE SERIES CASE
Photo
Upscaled versions of classic wooden shell cases, like the Martin Geib series cases. These feature a stronger 5-ply shell, deep textured leather-look exterior covering, plush padded interior with velour lining, heavy duty hardware and padded leather handle. We carry sizes for mandolin and banjo. For guitar refer to the Martin Geib series cases (search on 138N geib).
AVSC
AMERICAN VINTAGE SERIES CASE FOR RESONATOR BANJO, SHOPWORN
2 Photos
New, but shopworn (scuffed & slightly discolored top shell covering), fits typical resonator banjos, premier case features extra strong shaped, 5-ply shell w/ steel reinforced seams, arched lid, dual neck cradles, vintage leather handle, roomy accessory pocket, deluxe plush interior, and high grade simulated leather exterior covering.
out-of-stock, more coming soon
AVSCSW-RESOBJO
$160.00
|
AMERITAGE CASE COVER
MARTIN DREADNOUGHT CASE - Cordura cover made specifically for the Ameritage AME-20MG gold series case.
ACC1-MARTD
$80.00
|
AMERITAGE GOLD SERIES BANJO CASE
Photo
This premier case line protects your instrument from physical damage as well as humidity damage. The strong 6-ply shaped wooden shell has a durable taupe (gray-brown) Cordura-Plus covering, plush velour lining, suspension fit, dual neck cradles, internal humidity control system with humidifier, dehumidifier and digital hygrometer to monitor humidity levels, heavy duty brass latches, secure closure seal between top & bottom of case and comfortable steel reinforced handle. These cases are very well designed and very well made.
AGSC2
AMERITAGE GOLD SERIES GUITAR CASE
Photo
This premier case line protects your instrument from physical damage as well as humidity damage. The strong 6-ply shaped wooden shell has a durable taupe (gray-brown) Cordura-Plus covering, plush velour lining, suspension fit, dual neck cradles, internal humidity control system with humidifier, dehumidifier and digital hygrometer to monitor humidity levels, heavy duty brass latches, secure closure seal between top & bottom of case and comfortable steel reinforced handle. These cases are very well designed and very well made.
AGSC1
AMERITAGE GOLD SERIES MANDOLIN CASE
4 Photos
This premier case protects your mandolin from physical damage as well as humidity damage. Designed to fit either an A or an F style mandolin. The strong 6-ply rectangular wooden shell has a durable taupe (gray-brown) Cordura-Plus covering, plush velour lining, suspension fit, internal humidity control system with humidifier, dehumidifier and digital hygrometer to monitor humidity levels, heavy duty brass latches, secure closure seal between top & bottom of case and comfortable steel reinforced handle. A well designed and well made case.
AGSC3-OBLONG
.. list $378.00 ours
Inquire for Price
|
get an email price quote
AMERITAGE GOLD SERIES MANDOLIN CASE
This premier case protects your mandolin from physical damage as well as humidity damage. Designed to fit either an A or an F style mandolin. The strong 6-ply contoured F-shaped wooden shell has a durable taupe (gray-brown) Cordura-Plus covering, plush velour lining, suspension fit, internal humidity control system with humidifier, dehumidifier and digital hygrometer to monitor humidity levels, heavy duty brass latches, secure closure seal between top & bottom of case and comfortable steel reinforced handle. A well designed and well made case. Note - will not fit short scale mandolins such as the old F-4's.
AGSC3-SHAPED
.. list $354.00 ours
Inquire for Price
|
get an email price quote
AMERITAGE GOLD SERIES UKULELE CASE
Photo
This premier case line protects your instrument from physical damage as well as humidity damage. The strong 6-ply shaped wooden shell has a durable taupe (gray-brown) Cordura-Plus covering, plush velour lining, suspension fit, dual neck cradles, internal humidity control system with humidifier, dehumidifier and digital hygrometer to monitor humidity levels, heavy duty brass latches, secure closure seal between top & bottom of case and comfortable steel reinforced handle. These cases are very well designed and very well made.
AGSC4
APPALACHIAN DULCIMER GIGBAG
Photo
43"x 12" padded gigbag, Cordura nylon exterior, nylon lining, accessory pocket, shoulder strap, web handles, flat panel construction.
DCFO
.. list $54.00 ours
$44.50
|
AUTOHARP GIGBAG, BLACK
2 Photos
Nylon, padded carrying bag with zippered accessory pocket. "Autoharp Oscar Schmidt" logo embroidered on pocket. Two backpack straps have their own zippered compartment on the back. Fits full size autoharps. *NOTE - Does not fit OS73B or OS73C.
ACOS-GIG
.. list $40.00 ours
$30.00
|
AUTOHARP SEMI-HARD CASE WITH BACKPACK STRAPS
This fits all current Oscar Schmidt models including OS73C & OS73B. Hard foam covered with black cordura nylon for lightweight, sturdy protection. Form-fitting plush-lined interior, interior accessory pocket (3 1/2" x 11 1/2" x 1"), zippered exterior pocket (9 1/2" x 11" x 1/2") with embroidered Autoharp logo, padded carrying handles, removable backpack straps. A very nice case! Exterior is autoharp shape, 32" x 14" x 5". NOTE: The OS73 models fit snugly, but they fit.
ACOS-73DXGIG
.. list $69.50 ours
$50.00
|
BACKPACK STRAP FOR PRO PAC CASES
2 Photos
Comfortable padded straps convert your case to a backpack. Attaches to heavy duty fabric loops at center back and on each side of case. NOTE: For TENOR AND BARITONE CASES ONLY. No attachment loops on Concert case.
UCPP-STRAP
.. list $15.95 ours
$14.00
|
BAM HIGHTECH "00" GUITAR CASE
A very lightweight (6.5 lbs) and highly protective case sized for 00 / classical acoustic guitars. The sleek black molded shell is a 3-ply structure with an outer layer of tough ABS plastic over an "Airex" rigid foam core with another thermoplastic inner layer, allowing for a thin, highly impact resistant shell that also insulates well. There is also a complete PVC valence to seal top to bottom when case is closed. The lined interior utilizes a full body perimeter suspension system and dense foam neck cradle to suspend your guitar within the case. There is also a padded accessory pouch that slides in under the neck. Other features include 3 locking latches, 3 D-rings in backpack configuration along with 2-shoulder straps, sturdy hinges & strong comfortable handle. From Bam Cases of France.
on order, expected arrival date 08/16/08
BHGC-00
$700.00
|
BAM HIGHTECH "DREADNOUGHT" GUITAR CASE
5 Photos
A very lightweight (6.5 lbs) and highly protective case sized for dreadnought acoustic guitars. The sleek black molded shell is a 3-ply structure with an outer layer of tough ABS plastic over an "Airex" rigid foam core with another thermoplastic inner layer, allowing for a thin, highly impact resistant shell that also insulates well. There is also a complete PVC valence to seal top to bottom when case is closed. The lined interior utilizes a full body perimeter suspension system and dense foam neck cradle to suspend your guitar within the case. There is also a padded accessory pouch that slides in under the neck. Other features include 3 locking latches, 3 D-rings in backpack configuration along with 2-shoulder straps, sturdy hinges & strong comfortable handle. From Bam Cases of France.
BHGC-D
$715.00
|
BEARD ROAD-O-PHONIC CASE
3 Photos
Shaped hardshell case designed specifically for the Road-O-Phonic. Wooden shell, black exterior, plush padded interior. Fortunately, this case also is a great fit for the old 50's era 3/4 size solid-body National Resophonic resonator guitars and Supro electric guitars. Dimensions are ~12" body width, ~35" total length and ~3" depth.
ROADC
$125.00
|
BLACK MOUNTAIN DULCIMER GIGBAG
Photo
for 50-series dulcimers. 33"x11" padded bag of heavy duty black nylon with accessory pocket, web handles and shoulder strap, flat panel construction.
DGB50
.. list $40.00 ours
$29.00
|
BOSS CARRYING BAG
Photo
Heavy duty nylon carrying bag for Boss products.
BOSSBG
BOULDER ALPINE 00/RESONATOR GUITAR GIGBAG
Photo
The Boulder Alpine series gigbags are a fine addition to the gigbag realm. They combine rugged functionality with a visually appealing design at a very reasonable price. Made from durable 600 denier nylon with 30 mm of paddin g, heavy duty zippers, reflective stripe, colorful accents, detachable back pack straps and a multi-layer cargo pocket. They even have a side mount water bottle pouch (you must stay hydrated!). Sized for 00, classical and most resonator acoustic guitars. Available in a variety of colors.
BAG3
BOULDER ALPINE DREADNOUGHT/000 GUITAR GIGBAG
Photo
The Boulder Alpine series gigbags are a fine addition to the gigbag realm. They combine rugged functionality with a visually appealing design at a very reasonable price. Made from durable 600 denier nylon with 30 mm of padding, heavy duty zippers, reflective stripe, colorful accents, detachable backpack straps and a multi-layer cargo pocket. They even have a side mount water bottle pouch (you must stay hydrated!). Sized for 000, Grand Concert and Dreadnought acoustic guitars. Available in a variety of colors.
BAG2
BOULDER ALPINE MANDOLIN GIGBAG
Photo
The Boulder Alpine series gigbags are a fine addition to the gigbag realm. They combine rugged functionality with a visually appealing design at a very reasonable price. Made from durable 600 denier nylon with 30 mm of padding, heavy duty zippers, reflective stripe, colorful accents, detachable back pack straps and a multi-layer cargo pocket. They even have a side mount water bottle pouch (you must stay hydrated!). Sized for classic F-style mandolin, but also works fine for A-style. Available in a variety of colors.
BAG4
| blue
| $33.00
on order, expected arrival date unknown |
| green
| $33.00
|
| tan
| $33.00
on order, expected arrival date unknown |
BOULDER ALPINE OPEN-BACK BANJO GIGBAG
Photo
The Boulder Alpine series gigbags are a fine addition to the gigbag realm. They combine rugged functionality with a visually appealing design at a very reasonable price. Made from durable 600 denier nylon with 30 mm of padding, heavy duty zippers, reflective stripe, colorful accents, detachable back pack straps and a multi-layer cargo pocket. They even have a side mount water bottle pouch (you must stay hydrated!). Sized for typical 11" rim open-back banjos. Available in a variety of colors.
BAG6
| blue
| $39.75
on order, expected arrival date unknown |
| green
| $39.75
|
| tan
| $39.75
|
BOULDER ALPINE RESONATOR BANJO GIGBAG
Photo
The Boulder Alpine series gigbags are a fine addition to the gigbag realm. They combine rugged functionality with a visually appealing design at a very reasonable price. Made from durable 600 denier nylon with 30 mm of padding, heavy duty zippers, reflective stripe, colorful accents, detachable back pack straps and a multi-layer cargo pocket. They even have a side mount water bottle pouch (you must stay hydrated!). Sized for typical resonator banjos. Available in a variety of colors.
BAG5
| blue
| $39.75
|
| green
| $39.75
|
| tan
| $39.75
on order, expected arrival date unknown |
BREEDLOVE MANDOLIN CASE
Deluxe hardshell mandolin case by Breedlove fits their A AND K-style mandolins. Plush interior, black leather-look covering, Breedlove logo screened on front, very classy case.
MCBR
$125.00
|
CALTON DELUXE BANJO CASE - GIBSON 5-STRING RESONATOR BANJO
Photo
If you travel a lot or just seek superb protection for your instrument, you should consider a Calton case. These custom fitted fiberglass cases are rugged, well balanced, and attractive, with interiors custom tailored to each instrument. Each half of every case is hand moulded in a single piece, using pigmented resin, with no seams to separate and colour that is integral to the fiberglass. Hardware is high quality plated steel and is attached with steel rivets and reinforcing plates. The leather handle provides the optimum in comfort and balance. Case interiors are hand crafted from high quality foam padding, using up to 15 measurements and a template of the instrument. This particular case has been sized for a Gibson 5-string resonator banjo and we offer it here in a variety of color combinations. Other colors and sizes are available, just allow plenty of lead time as production takes about 6 months.
CBC1
CALTON DELUXE BANJO CASE - STELLING 5-STRING RESONATOR BANJO
Photo
If you travel a lot or just seek superb protection for your instrument, you should consider a Calton case. These custom fitted fiberglass cases are rugged, well balanced, and attractive, with interiors custom tailored to each instrument. Each half of every case is hand moulded in a single piece, using pigmented resin, with no seams to separate and colour that is integral to the fiberglass. Hardware is high quality plated steel and is attached with steel rivets and reinforcing plates. The leather handle provides the optimum in comfort and balance. Case interiors are hand crafted from high quality foam padding, using up to 15 measurements and a template of the instrument. This particular case has been sized for a Stelling 5-string resonator banjo and we offer it here in a variety of color combinations. Other colors and sizes are available, just allow plenty of lead time as production takes about 6 months.
CBC2
CALTON DELUXE GUITAR CASE - 12-FRET NATIONAL ROUNDNECK
Photo
If you travel a lot or just seek superb protection for your instrument, you should consider a Calton case. These custom fitted fiberglass cases are rur instrument. Each half of every case is hand moulded in a single piece, using pigmented resin, with no seams to separate and color that is integral to the fiberglass. Hardware is high quality plated steel and is attached with steel rivets and reinforcing plates. The leather handle provides the optimum in comfort and balance. Case interiors are hand crafted from high quality foam padding, using up to 15 measurements and a template of the instrument. This particular case has been sized for the National 12-fret body roundneck resonator guitar and we offer it here in a variety of color combinations. Other colors and sizes are available, just allow plenty of lead time as production takes about 6 months.
CGC7
CALTON DELUXE GUITAR CASE - GIBSON SLOPE-SHOULDER DREADNOUGHT
Photo
If you travel a lot or just seek superb protection for your instrument, you should consider a Calton case. These custom fitted fiberglass cases are rugged, well balanced, and attractive, with interiors custom tailored to each instrument. Each half of every case is hand moulded in a single piece, using pigmented resin, with no seams to separate and color that is integral to the fiberglass. Hardware is high quality plated steel and is attached with steel rivets and reinforcing plates. The leather handle provides the optimum in comfort and balance. Case interiors are hand crafted from high quality foam padding, using up to 15 measurements and a template of the instrument. This particular case has been sized for the Gibson slope-shoulder dreadnought, such as the J-45, and we offer it here in a variety of color combinations. Other colors and sizes are available, just allow plenty of lead time as production takes about 6 months.
CGC4
CALTON DELUXE GUITAR CASE - MARTIN & COLLINGS 14-FRET 000
Photo
If you travel a lot or just seek superb protection for your instrument, you should consider a Calton case. These custom fitted fiberglass cases are rugged, well balanced, and attractive, with interiors custom tailored to each instrument. Each half of every case is hand moulded in a single piece, using pigmented resin, with no seams to separate and color that is integral to the fiberglass. Hardware is high quality plated steel and is attached with steel rivets and reinforcing plates. The leather handle provides the optimum in comfort and balance. Case interiors are hand crafted from high quality foam padding, using up to 15 measurements and a template of the instrument. This particular case has been sized for the Martin or Collings 14-fret 000 and we offer it here in a variety of color combinations. Other colors and sizes are available, just allow plenty of lead time as production takes about 6 months.
CGC3
CALTON DELUXE GUITAR CASE - MARTIN & COLLINGS 14-FRET DREADNOUGHT
Photo
If you travel a lot or just seek superb protection for your instrument, you should consider a Calton case. These custom fitted fiberglass cases are rugged, well balanced, and attractive, with interiors custom tailored to each instrument. Each half of every case is hand moulded in a single piece, using pigmented resin, with no seams to separate and colour that is integral to the fiberglass. Hardware is high quality plated steel and is attached with steel rivets and reinforcing plates. The leather handle provides the optimum in comfort and balance. Case interiors are hand crafted from high quality foam padding, using up to 15 measurements and a template of the instrument. This particular case has been sized for the Martin or Collings 14-fret dreadnought and we offer it here in a variety of color combinations. Other colors and sizes are available, just allow plenty of lead time as production takes about 6 months.
CGC1
CALTON DELUXE GUITAR CASE - MARTIN 12-FRET 0
Photo
If you travel a lot or just seek superb protection for your instrument, you should consider a Calton case. These custom fitted fiberglass cases are rugged, well balanced, and attractive, with interiors custom tailored to each instrument. Each half of every case is hand moulded in a single piece, using pigmented resin, with no seams to separate and color that is integral to the fiberglass. Hardware is high quality plated steel and is attached with steel rivets and reinforcing plates. The leather handle provides the optimum in comfort and balance. Case interiors are hand crafted from high quality foam padding, using up to 15 measurements and a template of the instrument. This particular case has been sized for the Martin 12-fret 0 (it also works with the 14-fret 0) and we offer it here in a variety of color combinations. Other colors and sizes are available, just allow plenty of lead time as production takes about 6 months.
CGC5
CALTON DELUXE GUITAR CASE - MARTIN 12-FRET 00
Photo
If you travel a lot or just seek superb protection for your instrument, you should consider a Calton case. These custom fitted fiberglass cases are rugged, well balanced, and attractive, with interiors custom tailored to each instrument. Each half of every case is hand moulded in a single piece, using pigmented resin, with no seams to separate and color that is integral to the fiberglass. Hardware is high quality plated steel and is attached with steel rivets and reinforcing plates. The leather handle provides the optimum in comfort and balance. Case interiors are hand crafted from high quality foam padding, using up to 15 measurements and a template of the instrument. This particular case has been sized for the Martin 12-fret 00 and we offer it here in a variety of color combinations. Other colors and sizes are available, just allow plenty of lead time as production takes about 6 months.
CGC2
CALTON DELUXE GUITAR CASE - MARTIN 14-FRET 0000/M
Photo
If you travel a lot or just seek superb protection for your instrument, you should consider a Calton case. These custom fitted fiberglass cases are rugged, well balanced, and attractive, with interiors custom tailored to each instrument. Each half of every case is hand moulded in a single piece, using pigmented resin, with no seams to separate and color that is integral to the fiberglass. Hardware is high quality plated steel and is attached with steel rivets and reinforcing plates. The leather handle provides the optimum in comfort and balance. Case interiors are hand crafted from high quality foam padding, using up to 15 measurements and a template of the instrument. This particular case has been sized for the Martin 14-fret 0000/M and we offer it here in a variety of color combinations. Other colors and sizes are available, just allow plenty of lead time as production takes about 6 months.
CGC6
CALTON DELUXE MANDOLIN CASE - GIBSON F-MODEL MANDOLIN
Photo
If you travel a lot or just seek superb protection for your instrument, you should consider a Calton case. These custom fitted fiberglass cases are rugged, well balanced, and attractive, with interiors custom tailored to each instrument. Each half of every case is hand moulded in a single piece, using pigmented resin, with no seams to separate and colour that is integral to the fiberglass. Hardware is high quality plated steel and is attached with steel rivets and reinforcing plates. The leather handle provides the optimum in comfort and balance. Case interiors are hand crafted from high quality foam padding, using up to 15 measurements and a template of the instrument. This particular case has been sized for a Gibson F-model mandolin and we offer it here in a variety of color combinations. Other colors and sizes are available, just allow plenty of lead time as production takes about 6 months.
CMC1
CANADIAN BANJO CASE
Photo
Classic workhorse cases manufactured in Canada that have been around for decades and marketed under a variety of names over the years (Everest, Grand Prix, Superior, TKL,.....). Plywood shell, rugged black or vinyl tweed exterior, plush padded interior, accessory compartment, strong latches & hinges, and a sturdy handle. These continue to be amongst our more popular cases. Available in a wide variety of sizes.
BCEV
CANADIAN BASS GUITAR CASE
2 Photos
Rectangular wooden shell, vinyl tweed covering with bound ends & corner reinforcement, plush padded interior, flat top & back. Fits Fender® Precision ("P"), and similarly styled basses.
GCEV-FPBT
$115.00
|
CANADIAN DOUBLE VIOLIN CASE
2 Photos
Fits 2 full size violins, rectangular wood shell, arched lid, black leather-look vinyl exterior, accessory box, plush padded interior.
on order, expected arrival date unknown
VCEV-DBL
$140.00
|
CANADIAN DULCIMER CASE
2 Photos
Appalachian (lap ) dulcimer case features tapered oblong wooden shell, flat top, plush padded interior, black exterior, fits instruments up to ~36" long and ~7-3/4" wide.
DCEV
$90.00
|
CANADIAN F-MANDOLIN CASE, SHOPWORN
NEW, but shopworn (instrument blanket missing), black, arched top rectangular hardshell case. Fits F-model mandolins. Interior is padded with velour lining and has 2 large accessory compartments. Outside dimensions: 14.5" x 32.75" x 5".
MCEVSW-FOBL
$110.00
|
CANADIAN MANDOLIN CASE
Photo
Classic workhorse cases manufactured in Canada that have been around for decades and marketed under a variety of names over the years (Everest, Grand Prix, Superior, TKL,.....). Plywood shell, rugged black or vinyl tweed exterior, plush padded interior, accessory compartment, strong latches & hinges, and a sturdy handle. These continue to be amongst our more popular cases.
MCEV
CARTER STARTER PEDAL STEEL CASE
2 Photos
Hardshell case designed specifically for the Carter Starter pedal steel guitar. Wooden construction covered with charcoal gray carpet material.
CSC1
$90.00
|
CLAM JUMBO DELUXE FLIGHT-ROAD CASE
6 Photos
BLACK - Unique crush resistant corrugated plastic shell and very dense foam suspension pads create a safe enclosure for your acoustic guitar case or gigbag, suitable for cargo bay air travel. Your case is actually suspended within the shell to maximize the protection. Heavy duty tie down straps keep the shell securely closed. Features include a comfortable handle, a shoulder strap and detachable wheels (which store inside the case) so that you can roll through the airport. Fits most dreadnought, small-F (16" lower bout") & F-jumbo (17" lower bout) cases. The "clam" weighs in at ~12 lbs. Note, due to size these carry a $50.00 shipping fee. From CaseXtreme Fly-it-Safe Case Co.
CXJD
$225.00
|
CLAM STANDARD DELUXE FLIGHT- ROAD CASE
7 Photos
Unique crush resistant corrugated plastic shell and very dense foam suspension pads create a safe enclosure for your acoustic guitar or banjo case or gigbag, suitable for cargo bay air travel. Your case is actually suspended within the shell to maximize the protection. Heavy duty tie down straps keep the shell securely closed. Features include a comfortable handle, a shoulder strap and detachable wheels (which store inside the case) so that you can roll through the airport. Fits most resonator guitar, 000, 00 & 0 guitar cases as well as resonator and open back banjo cases. The "clam" weighs in at ~12 lbs. Note, due to size,these carry a $50.00 shipping fee. From CaseXtreme Fly-it-Safe Case Co.
CXSD
$225.00
|
CONCEPT 2.4 GUITAR CASE
Photo
From TKL, these are advanced designed molded guitar cases which offer increased protection to the guitar without adding a lot of weight. The outer molded shell is black with a complete aluminum valance and heavy-duty latches and hinges. The interior features a dense molded cradle for the instrument, covered with a soft lining material. The cradle both protects and insulates the guitar from temperature extremes. A very nice design from TKL. Available in a variety of sizes.
GCC24
CONCERT UKULELE DELUXE GIGBAG
2 Photos
BLACK CORDURA SHELL - Better than a standard uke gigbag. Thick, semi-rigid 25mm foam padding, tough nylon covering and soft lined interior. Large exterior zippered accessory pouch. Double zippered closure. Excellent lightweight alternative to a hardshell case. Fits most concert ukes.
UCS24-BK
$34.00
|
CONCERT UKULELE DELUXE GIGBAG
2 Photos
NAVY BLUE CORDURA SHELL - Better than a standard uke gigbag. Thick, semi-rigid 25mm foam padding, tough nylon covering and soft lined interior. Large exterior zippered accessory pouch. Double zippered closure. Excellent lightweight alternative to a hardshell case. Fits most concert ukes.
UCS24-BL
$34.00
|
CONCERT UKULELE DELUXE GIGBAG
2 Photos
DARK RED CORDURA SHELL - Better than a standard uke gigbag. Thick, semi-rigid 25mm foam padding, tough nylon covering and soft lined interior. Large exterior zippered accessory pouch. Double zippered closure. Excellent lightweight alternative to a hardshell case. Fits most concert ukes.
UCS24-RD
$34.00
|
CONCERTINA CASE
2 Photos
Vinyl covered hardshell case. Two locking latches. Plush interior. Interior dimensions are 9 3/8" X 8 1/2" X 7" deep.
ACC-CONC
.. list $150.00 ours
$95.00
|
CONCERTINA GIGBAG
Photo
FITS ALL CONCERTINAS IN OUR CATALOG. Measures approx 7 1/2" tall and 7 1/4" accross the ends (flat to flat); (8 1/4" point to point). Black nylon zippered bag with adjustable shoulder strap; small amount of padding.
ACC-CONGIG
$9.95
|
CONCORD ADJUSTABLE MANDOLIN CASE
3 Photos
Quite simply, this is the most versatile mandolin case to cross our path. The interior has adjustable pads for the sides of the body and the headstock. You configure them in a way best suited to your mandolin. The pads are secured in place with velcro. Holds right or left handed mandolins, A or F models, Army-Navy, celtic style, odd shapes etc, etc. The design, which comes from mandolin maker Michael Lewis in partnership with the Concord case company, has been very well thought out and the execution of the design is excellent. The shell is a wooden rectangle with arched top & lined cordura nylon cover, which provides great impact & thermal protection. The cover has a full size music compartment over the top. The interior is nicely lined with suspension pads in addition to the adjustable pads. There are also two large accessory compartments, a thermometer, hygrometer & humidifier and even a Tone-Gard holder in the lid. To facilitate carrying the case there are 5 D-rings with 2 straps such that you can configure either a single shoulder strap or dual backpack straps, a web nylon handle on one end and a very comfortable padded handle on the side. Imported from Asia. Very, very nicely done.
CAMC1
.. list $395.00 ours
$275.00
|
DEAN LIGHT LEER CASES
Photo
Dean lightweight Leer cases feature hard foam interior with nylon exterior. Good protection & LIGHT!
DLLC
DEERING OPENBACK BANJO GIGBAG
2 Photos
Fits Goodtime openback models. Black padded bag with Deering eagle logo in colored embroidery. Has accessory pocket and shoulder strap.
BCGO-OB
.. list $77.00 ours
$57.00
|
DEERING RESONATOR BANJO GIGBAG
2 Photos
Fits Goodtime resonator models. Black padded bag with Deering eagle logo in colored embroidery. Has accessory pocket and shoulder strap.
BCGO-RES
.. list $77.00 ours
$57.00
|
DELUXE BLACK UKULELE CASE
Photo
Super durable, strong wood case covered with black Dura Grip material. Ukulele shaped. Plush lined. Provides the ultimate in ukulele protection.
DHS
DELUXE CONCERTINA GIGBAG, SMALL
Photo
Approx. 8" diameter by 10" deep. Fits all concertinas we stock. Cordura nylon - COLORS VARY - with 1/8" thick foam padding bonded to nylon lining material. Well made with zippered top, side handle and removeable shoulder strap.
ACC-DCONGIGS
.. list $46.00 ours
$33.00
|
EASTMAN FIBERGLASS BOWLBACK MANDOLIN CASE
Photo
A very rugged, but lightweight fiberglass case from the Eastman mandolin company. The shell is bowlback-mandolin-shaped, has three heavy-duty latches, a comfortable handle and 3 D-rings so that you may attach a shoulder strap. The interior is plush lined and padded. Available in a variety of colors.
EMC3
| white
| $150.00
|
| black
| $150.00
|
| silver
| $150.00
on order, expected arrival date unknown |
| blue
| $150.00
on order, expected arrival date unknown |
| green
| $150.00
available as a special order -- normally ships within 30-120 days |
EASTMAN FIBERGLASS F-MANDOLIN CASE
Photo
A very rugged, but lightweight fiberglass case from the Eastman mandolin company. The shell is F-shaped, has three heavy-duty latches, a comfortable handle and 3 D-rings so that you may attach a shoulder strap. The interior is plush lined and padded. Available in a variety of colors.
EMC1
| white
| $125.00
on order, expected arrival date unknown |
| black
| $125.00
|
| silver
| $125.00
on order, expected arrival date unknown |
| blue
| $125.00
|
EASTWOOD GUITAR CASE
2 Photos
WIDE BODY - Rectangular wooden hardshell case for solid body electric guitars with bodies up to 15" wide. Black exterior with Eastwood logo, black plush padded interior.
EGC1
$140.00
|
EASTWOOD MANDOCASTER CASE
2 Photos
Basic rectangular wooden shell case made specifically for the "mandocaster" solid body electric mandolin.
EWMCC1
$140.00
|
ELITE GUITAR CASE
Photo
Elite series cases feature a classic shaped multi-ply wooden shell that has both an arched top and an arched back. The arching on the back greatly increases the strength, yielding a very protective outer shell for your guitar. The exterior is covered with a deep textured black leather-look material, has a luggage grade padded stitched handle, heavy duty hardware, and D-rings so that you may attach a shoulder strap if you wish. The deeply padded interior has dual neck cradles, a roomy accessory compartment, and is lined with textured velour. Made in Canada, this fine line of cases is available in a number of different sizes.
GCE
EMBASSY DELUXE D-SERIES 4/4 VIOLIN CASE
7 Photos
Compact D-shape, lightweight reinforced shell, black padded nylon oxford cover, full length zippered music pocket, shoulder strap, plush interior with suspension pads, large accessory box, special shoulder rest storage area, satin lined blanket, 2 bow holders with bow ribbons, string tube, hygrometer, 1-locking latch.
VCEM-DD
.. list $245.00 ours
$175.00
|
FENDER GIGBAGS
Photo
Fender's popular gigbags come in a variety of sizes and styles to protect and fit your instrument. Available in standard, deluxe, deluxe tweed, and ultra styling.
FGB
FENDER HARDSHELL CASE
Photo
Fender brand instrument cases.
GCF
FENDER® SBTXJA GUITAR CASE
SHOPWORN - New, but shopworn (foot missing on back). Our GCF-SBTXJA case. Standard black Tolex wooden hardshell case with black acrylic interior, black vinyl ends and chrome hardware. Fits Jaguar, JazzmasterTM, Toronado® and JagmasterTM electric guitars.
GCFSW1
.. list $184.99 ours
$120.00
|
FLEA UKULELE HARDSHELL CASE
2 Photos
Made by Gator and sized especially for Flea ukes. Tough brown tolex covering, brass latches, padded interior with black fur lining and accessory pocket.
UCFLEA
$59.00
|
FREMONT CONCERT UKULELE HARDSHELL CASE
2 Photos
Black tolex covered wood case, rectangular shape. Fits longneck ukes, too. Black plush lining with storage compartment for accessories. Nice case.
on order, expected arrival date 07/30/08
UHC-C
$70.00
|
FREMONT CONCERT UKULELE TWEED HARDSHELL CASE
2 Photos
Tweed-look tolex covered wood case, rectangular shape. Fits longneck ukes, too. Black plush lining with storage compartment for accessories. Nice case.
UTC-C
$80.00
|
FREMONT SOPRANO UKULELE HARDSHELL CASE
2 Photos
Black tolex covered wood case, rectangular shape. Fits longneck and pineapple ukes, too. Black plush lining with storage compartment for accessories. Nice case.
on order, expected arrival date 07/30/08
UHC-S
$65.00
|
FREMONT SOPRANO UKULELE TWEED HARDSHELL CASE
2 Photos
Tweed-look tolex covered wood case, rectangular shape. Fits longneck and pineapple ukes, too. Black plush lining with storage compartment for accessories. Nice caes.
on order, expected arrival date 07/30/08
UTC-S
$75.00
|
FREMONT TENOR UKULELE HARDSHELL CASE
2 Photos
Black tolex covered wood case, rectangular shape. Fits longneck ukes, too. Black plush lining with storage compartment for accessories. Nice case.
UHC-T
$80.00
|
FREMONT TENOR UKULELE TWEED HARDSHELL CASE
2 Photos
Tweed-look tolex covered wood case, rectangular shape. Fits longneck ukes, too. Black plush lining with storage compartment for accessories. Nice case.
UTC-T
$95.00
|
GIBSON GIGBAG
2 Photos
fits Les Paul, SG, with plush lining black bag with Gibson logo.
GCGI-GIG
.. list $88.00 ours
$59.00
|
GOLD TONE BANJO CASE
Photo
Gold Tone hardshell cases and gigbags for all their banjo-type instruments.
BCGT
| 
